[PATCH 2/3] remoteproc: qcom: wcss: populate driver data for IPQ6018

Gokul Sriram Palanisamy
2021-01-29T17:11:59Z

Populate hardcoded param using driver data for IPQ6018 SoCs.

Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
---
drivers/remoteproc/qcom_q6v5_wcss.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c b/drivers/remoteproc/qcom_q6v5_wcss.c
index 7c64bfc..bc9531c 100644
--- a/drivers/remoteproc/qcom_q6v5_wcss.c
+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
@@ -965,7 +965,7 @@ static int q6v5_alloc_memory_region(struct q6v5_wcss *wcss)
return 0;
}

-static int ipq8074_init_clock(struct q6v5_wcss *wcss)
+static int ipq_init_clock(struct q6v5_wcss *wcss)
{
int ret;

@@ -1172,7 +1172,7 @@ static int q6v5_wcss_remove(struct platform_device *pdev)
}

static const struct wcss_data wcss_ipq8074_res_init = {
- .init_clock = ipq8074_init_clock,
+ .init_clock = ipq_init_clock,
.q6_firmware_name = "IPQ8074/q6_fw.mdt",
.m3_firmware_name = "IPQ8074/m3_fw.mdt",
.crash_reason_smem = WCSS_CRASH_REASON,
@@ -1185,6 +1185,20 @@ static const struct wcss_data wcss_ipq8074_res_init = {
.need_mem_protection = true,
};

+static const struct wcss_data wcss_ipq6018_res_init = {
+ .init_clock = ipq_init_clock,
+ .q6_firmware_name = "IPQ6018/q6_fw.mdt",
+ .m3_firmware_name = "IPQ6018/m3_fw.mdt",
+ .crash_reason_smem = WCSS_CRASH_REASON,
+ .aon_reset_required = true,
+ .wcss_q6_reset_required = true,
+ .bcr_reset_required = false,
+ .ssr_name = "q6wcss",
+ .ops = &q6v5_wcss_ipq8074_ops,
+ .requires_force_stop = true,
+ .need_mem_protection = true,
+};
+
static const struct wcss_data wcss_qcs404_res_init = {
.init_clock = qcs404_init_clock,
.init_regulator = qcs404_init_regulator,
@@ -1203,6 +1217,7 @@ static const struct wcss_data wcss_qcs404_res_init = {

static const struct of_device_id q6v5_wcss_of_match[] = {
{ .compatible = "qcom,ipq8074-wcss-pil", .data = &wcss_ipq8074_res_init },
+ { .compatible = "qcom,ipq6018-wcss-pil", .data = &wcss_ipq6018_res_init },
{ .compatible = "qcom,qcs404-wcss-pil", .data = &wcss_qcs404_res_init },
{ },
};
--
2.7.4