Re: [PATCH v3 1/2] dt-bindings: rng: bcm2835: document reset support

[Rob Herring <robh@kernel.org>]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1204 bytes --]

On Tue, 23 Feb 2021 18:00:05 +0100, Álvaro Fernández Rojas wrote:
> Some devices may need to perform a reset before using the RNG, such as the
> BCM6368.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
> ---
>  v3: make resets required if brcm,bcm6368-rng.
>  v2: document reset support.
> 
>  .../devicetree/bindings/rng/brcm,bcm2835.yaml   | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/rng/brcm,bcm2835.example.dt.yaml: rng@10004180: 'resets' does not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml

See https://patchwork.ozlabs.org/patch/1443582

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.