public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Md Sadre Alam <mdalam@codeaurora.org>
To: miquel.raynal@bootlin.com, mani@kernel.org,
	boris.brezillon@collabora.com, linux-mtd@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: mdalam@codeaurora.org, sricharan@codeaurora.org
Subject: [PATCH 4/5] mtd: rawnand: qcom: Add helper to configure location register
Date: Wed, 24 Feb 2021 01:09:00 +0530	[thread overview]
Message-ID: <1614109141-7531-4-git-send-email-mdalam@codeaurora.org> (raw)
In-Reply-To: <1614109141-7531-1-git-send-email-mdalam@codeaurora.org>

Create a nandc_set_read_loc() helper to abstract the
configuration of the location register.

QPIC v2 onwards features a separate location register
for the last codeword, so introducing this extra helper
which will simplify the addition of QPIC v2 support.

Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
---
 drivers/mtd/nand/raw/qcom_nandc.c | 36 ++++++++++++++++++++++++------------
 1 file changed, 24 insertions(+), 12 deletions(-)

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index f1aafee..57d2ad02 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -181,8 +181,8 @@
 #define	ECC_BCH_4BIT	BIT(2)
 #define	ECC_BCH_8BIT	BIT(3)
 
-#define nandc_set_read_loc(chip, reg, cw_offset, read_size, is_last_read_loc)	\
-nandc_set_reg(chip, NAND_READ_LOCATION_##reg,			\
+#define nandc_set_read_loc_first(chip, reg, cw_offset, read_size, is_last_read_loc)	\
+nandc_set_reg(chip, reg,			\
 	      ((cw_offset) << READ_LOCATION_OFFSET) |		\
 	      ((read_size) << READ_LOCATION_SIZE) |			\
 	      ((is_last_read_loc) << READ_LOCATION_LAST))
@@ -668,6 +668,18 @@ static bool qcom_nandc_is_last_cw(struct nand_ecc_ctrl *ecc, int cw)
 	return cw == (ecc->steps - 1);
 }
 
+/* helper to configure location register values */
+static void nandc_set_read_loc(struct nand_chip *chip, int cw, int reg,
+			       int cw_offset, int read_size, int is_last_read_loc)
+{
+	int reg_base = NAND_READ_LOCATION_0;
+
+	reg_base += reg * 4;
+
+	return nandc_set_read_loc_first(chip, reg_base, cw_offset,
+			read_size, is_last_read_loc);
+}
+
 /* helper to configure address register values */
 static void set_address(struct qcom_nand_host *host, u16 column, int page)
 {
@@ -725,7 +737,7 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read)
 	nandc_set_reg(chip, NAND_EXEC_CMD, 1);
 
 	if (read)
-		nandc_set_read_loc(chip, 0, 0, host->use_ecc ?
+		nandc_set_read_loc(chip, 0, 0, 0, host->use_ecc ?
 				   host->cw_data : host->cw_size, 1);
 }
 
@@ -1218,7 +1230,7 @@ static int nandc_param(struct qcom_nand_host *host)
 		nandc_set_reg(chip, NAND_DEV_CMD_VLD_RESTORE, nandc->vld);
 	}
 
-	nandc_set_read_loc(chip, 0, 0, 512, 1);
+	nandc_set_read_loc(chip, 0, 0, 0, 512, 1);
 
 	if (!nandc->props->qpic_v2) {
 		write_reg_dma(nandc, NAND_DEV_CMD_VLD, 1, 0);
@@ -1646,16 +1658,16 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
 	}
 
 	if (nandc->props->is_bam) {
-		nandc_set_read_loc(chip, 0, read_loc, data_size1, 0);
+		nandc_set_read_loc(chip, cw, 0, read_loc, data_size1, 0);
 		read_loc += data_size1;
 
-		nandc_set_read_loc(chip, 1, read_loc, oob_size1, 0);
+		nandc_set_read_loc(chip, cw, 1, read_loc, oob_size1, 0);
 		read_loc += oob_size1;
 
-		nandc_set_read_loc(chip, 2, read_loc, data_size2, 0);
+		nandc_set_read_loc(chip, cw, 2, read_loc, data_size2, 0);
 		read_loc += data_size2;
 
-		nandc_set_read_loc(chip, 3, read_loc, oob_size2, 1);
+		nandc_set_read_loc(chip, cw, 3, read_loc, oob_size2, 1);
 	}
 
 	config_nand_cw_read(chip, false);
@@ -1886,13 +1898,13 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
 
 		if (nandc->props->is_bam) {
 			if (data_buf && oob_buf) {
-				nandc_set_read_loc(chip, 0, 0, data_size, 0);
-				nandc_set_read_loc(chip, 1, data_size,
+				nandc_set_read_loc(chip, i, 0, 0, data_size, 0);
+				nandc_set_read_loc(chip, i, 1, data_size,
 						   oob_size, 1);
 			} else if (data_buf) {
-				nandc_set_read_loc(chip, 0, 0, data_size, 1);
+				nandc_set_read_loc(chip, i, 0, 0, data_size, 1);
 			} else {
-				nandc_set_read_loc(chip, 0, data_size,
+				nandc_set_read_loc(chip, i, 0, data_size,
 						   oob_size, 1);
 			}
 		}
-- 
2.7.4


  parent reply	other threads:[~2021-02-23 19:41 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-23 19:38 [PATCH 1/5] mtd: rawnand: qcom: Convert nandc to chip in Read/Write helper Md Sadre Alam
2021-02-23 19:38 ` [PATCH 2/5] mtd: rawnand: qcom: Add helper to check last code word Md Sadre Alam
2021-03-02 16:32   ` Miquel Raynal
2021-02-23 19:38 ` [PATCH 3/5] mtd: rawnand: qcom: Rename parameter name in macro Md Sadre Alam
2021-03-02 16:32   ` Miquel Raynal
2021-02-23 19:39 ` Md Sadre Alam [this message]
2021-03-02 16:32   ` [PATCH 4/5] mtd: rawnand: qcom: Add helper to configure location register Miquel Raynal
2021-02-23 19:39 ` [PATCH 5/5] mtd: rawnand: qcom: update last code word register Md Sadre Alam
2021-03-02 16:32 ` [PATCH 1/5] mtd: rawnand: qcom: Convert nandc to chip in Read/Write helper Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1614109141-7531-4-git-send-email-mdalam@codeaurora.org \
    --to=mdalam@codeaurora.org \
    --cc=boris.brezillon@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=mani@kernel.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=sricharan@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox