[PATCH v1 2/2] arm64: dts: qcom: sc7280: Add clock controller nodes

Taniya Das
2021-04-10T02:05:09Z

Add support for the video, gpu, display, lpass clock controller
device nodes for SC7280 SoC.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 58 ++++++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index cda3f2a..b59ffff 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -5,8 +5,12 @@
* Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
*/

+#include <dt-bindings/clock/qcom,dispcc-sc7280.h>
#include <dt-bindings/clock/qcom,gcc-sc7280.h>
+#include <dt-bindings/clock/qcom,gpucc-sc7280.h>
+#include <dt-bindings/clock/qcom,lpass-sc7280.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,videocc-sc7280.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/power/qcom-aoss-qmp.h>
@@ -324,6 +328,31 @@
};
};

+ lpasscc: lpasscc@3000000 {
+ compatible = "qcom,sc7280-lpasscc";
+ reg = <0 0x03000000 0 0x40>,
+ <0 0x03c04000 0 0x4>,
+ <0 0x03389000 0 0x24>;
+ reg-names = "qdsp6ss", "top_cc", "cc";
+ clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
+ clock-names = "iface";
+ #clock-cells = <1>;
+ };
+
+ gpucc: clock-controller@3d90000 {
+ compatible = "qcom,sc7280-gpucc";
+ reg = <0 0x03d90000 0 0x9000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+ <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+ clock-names = "bi_tcxo",
+ "gcc_gpu_gpll0_clk_src",
+ "gcc_gpu_gpll0_div_clk_src";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
stm@6002000 {
compatible = "arm,coresight-stm", "arm,primecell";
reg = <0 0x06002000 0 0x1000>,
@@ -820,6 +849,35 @@
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};

+ videocc: clock-controller@aaf0000 {
+ compatible = "qcom,sc7280-videocc";
+ reg = <0 0xaaf0000 0 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>;
+ clock-names = "bi_tcxo", "bi_tcxo_ao";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ dispcc: clock-controller@af00000 {
+ compatible = "qcom,sc7280-dispcc";
+ reg = <0 0xaf00000 0 0x20000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+ <0>, <0>, <0>, <0>, <0>, <0>;
+ clock-names = "bi_tcxo", "gcc_disp_gpll0_clk",
+ "dsi0_phy_pll_out_byteclk",
+ "dsi0_phy_pll_out_dsiclk",
+ "dp_phy_pll_link_clk",
+ "dp_phy_pll_vco_div_clk",
+ "edp_phy_pll_link_clk",
+ "edp_phy_pll_vco_div_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,sc7280-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>;