Re: [PATCH v9 2/5] soc: qcom: Add SoC sleep stats driver

Maulik Shah
2021-10-05T08:56:42Z

Hi,

On 9/25/2021 4:50 AM, Bjorn Andersson wrote:
> On Mon 06 Sep 00:28 CDT 2021, Maulik Shah wrote:
>
>> From: Mahesh Sivasubramanian <msivasub@codeaurora.org>
>>
>> Let's add a driver to read the stats from remote processor and
>> export to debugfs.
>>
>> The driver creates "qcom_sleep_stats" directory in debugfs and
>> adds files for various low power mode available. Below is sample
>> output with command
>>
>> cat /sys/kernel/debug/qcom_sleep_stats/ddr
>> count = 0
>> Last Entered At = 0
>> Last Exited At = 0
>> Accumulated Duration = 0
>>
>> Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
>> Signed-off-by: Lina Iyer <ilina@codeaurora.org>
>> [mkshah: add subsystem sleep stats, create one file for each stat]
>> Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
>> ---
>> drivers/soc/qcom/Kconfig | 10 ++
>> drivers/soc/qcom/Makefile | 1 +
>> drivers/soc/qcom/soc_sleep_stats.c | 241 +++++++++++++++++++++++++++++++++++++
>> 3 files changed, 252 insertions(+)
>> create mode 100644 drivers/soc/qcom/soc_sleep_stats.c
>>
>> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
>> index 79b568f..e80b63a 100644
>> --- a/drivers/soc/qcom/Kconfig
>> +++ b/drivers/soc/qcom/Kconfig
>> @@ -190,6 +190,16 @@ config QCOM_SOCINFO
>> Say yes here to support the Qualcomm socinfo driver, providing
>> information about the SoC to user space.
>>
>> +config QCOM_SOC_SLEEP_STATS
>> + tristate "Qualcomm Technologies, Inc. (QTI) SoC sleep stats driver"
>> + depends on ARCH_QCOM && DEBUG_FS || COMPILE_TEST
>> + depends on QCOM_SMEM
>> + help
>> + Qualcomm Technologies, Inc. (QTI) SoC sleep stats driver to read
>> + the shared memory exported by the remote processor related to
>> + various SoC level low power modes statistics and export to debugfs
>> + interface.
>> +
>> config QCOM_WCNSS_CTRL
>> tristate "Qualcomm WCNSS control driver"
>> depends on ARCH_QCOM || COMPILE_TEST
>> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
>> index ad675a6..5f30d74 100644
>> --- a/drivers/soc/qcom/Makefile
>> +++ b/drivers/soc/qcom/Makefile
>> @@ -20,6 +20,7 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
>> obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
>> obj-$(CONFIG_QCOM_SMSM) += smsm.o
>> obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o
>> +obj-$(CONFIG_QCOM_SOC_SLEEP_STATS) += soc_sleep_stats.o
>
> I know that the rest of the modules here does a bad job and have
> completely generic names, but could we rename this "qcom_sleep_stats"
> instead?

Sure renamed in v10.

>
>> obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
>> obj-$(CONFIG_QCOM_APR) += apr.o
>> obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o
>> diff --git a/drivers/soc/qcom/soc_sleep_stats.c b/drivers/soc/qcom/soc_sleep_stats.c
> [..]
>> +static int qcom_soc_sleep_stats_probe(struct platform_device *pdev)
>> +{
>> + struct resource *res;
>> + void __iomem *reg;
>> + struct dentry *root;
>> + const struct stats_config *config;
>> + struct stats_data *d;
>> + int i;
>> +
>> + config = device_get_match_data(&pdev->dev);
>> + if (!config)
>> + return -ENODEV;
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + if (!res)
>> + return PTR_ERR(res);
>
> You no longer use this "res".

Thanks for catching this, removed in v10.

>
>> +
>> + reg = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
>> + if (!reg)
>
> IS_ERR()

Updated in v10 to use IS_ERR().

>
>> + return -ENOMEM;
>> +
>> + d = devm_kcalloc(&pdev->dev, config->num_records,
>> + sizeof(*d), GFP_KERNEL);
>> + if (!d)
>> + return -ENOMEM;
>> +
>> + for (i = 0; i < config->num_records; i++)
>> + d[i].appended_stats_avail = config->appended_stats_avail;
>> +
>> + root = debugfs_create_dir("qcom_sleep_stats", NULL);
>> +
>> + qcom_create_subsystem_stat_files(root);
>> + qcom_create_soc_sleep_stat_files(root, reg, d, config->num_records);
>> +
>> + platform_set_drvdata(pdev, root);
>> +
>> + return 0;
>> +}
>> +
>> +static int qcom_soc_sleep_stats_remove(struct platform_device *pdev)
>> +{
>> + struct dentry *root = platform_get_drvdata(pdev);
>> +
>> + debugfs_remove_recursive(root);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct stats_config rpm_data = {
>> + .num_records = 2,
>> + .appended_stats_avail = true,
>> +};
>> +
>> +static const struct stats_config rpmh_data = {
>> + .num_records = 3,
>> + .appended_stats_avail = false,
>> +};
>> +
>> +static const struct of_device_id qcom_soc_sleep_stats_table[] = {
>> + { .compatible = "qcom,rpm-sleep-stats", .data = &rpm_data },
>> + { .compatible = "qcom,rpmh-sleep-stats", .data = &rpmh_data },
>> + { }
>> +};
>
> MODULE_DEVICE_TABLE(of, qcom_soc_sleep_stats_table);
>
> Otherwise the module doesn't load automatically.
>
> Regards,
> Bjorn

Added MODULE_DEVICE_TABLE in v10.

Thanks,
Maulik

>
>> +
>> +static struct platform_driver soc_sleep_stats = {
>> + .probe = qcom_soc_sleep_stats_probe,
>> + .remove = qcom_soc_sleep_stats_remove,
>> + .driver = {
>> + .name = "soc_sleep_stats",
>> + .of_match_table = qcom_soc_sleep_stats_table,
>> + },
>> +};
>> +module_platform_driver(soc_sleep_stats);
>> +
>> +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. (QTI) SoC Sleep Stats driver");
>> +MODULE_LICENSE("GPL v2");
>> --
>> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
>> of Code Aurora Forum, hosted by The Linux Foundation
>>

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a
member of Code Aurora Forum, hosted by The Linux Foundation