From: Balakrishna Godavarthi <bgodavar@codeaurora.org>
To: marcel@holtmann.org, bjorn.andersson@linaro.org, johan.hedberg@gmail.com
Cc: mka@chromium.org, linux-kernel@vger.kernel.org,
linux-bluetooth@vger.kernel.org, hemantg@codeaurora.org,
linux-arm-msm@vger.kernel.org, bgodavar@codeaurora.org,
rjliao@codeaurora.org, pharish@codeaurora.org,
abhishekpandit@chromium.org
Subject: [PATCH v1 1/2] arm64: dts: qcom: sc7280: Add bluetooth node on SC7280 IDP board
Date: Wed, 6 Oct 2021 18:00:02 +0530 [thread overview]
Message-ID: <1633523403-32264-1-git-send-email-bgodavar@codeaurora.org> (raw)
Add bluetooth SoC WCN6750 node for SC7280 IDP board.
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
---
arch/arm64/boot/dts/qcom/sc7280-idp.dts | 2 ++
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 31 +++++++++++++++++++++++++++++++
2 files changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 64fc22a..d3f5393 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -17,6 +17,8 @@
aliases {
serial0 = &uart5;
+ bluetooth0 = &bluetooth;
+ hsuart0 = &uart7;
};
chosen {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 272d5ca..05aa729 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -393,6 +393,24 @@
<&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default", "sleep";
pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
+
+ bluetooth: wcn6750-bt {
+ compatible = "qcom,wcn6750-bt";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_en_default>;
+ enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; /* BT_EN */
+ swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; /* SW_CTRL */
+ vddio-supply = <&vreg_l19b_1p8>;
+ vddaon-supply = <&vreg_s7b_0p9>;
+ vddbtcxmx-supply = <&vreg_s7b_0p9>;
+ vddrfacmn-supply = <&vreg_s7b_0p9>;
+ vddrfa0p8-supply = <&vreg_s7b_0p9>;
+ vddrfa1p7-supply = <&vreg_s1b_1p8>;
+ vddrfa1p2-supply = <&vreg_s8b_1p2>;
+ vddrfa2p2-supply = <&vreg_s1c_2p2>;
+ vddasd-supply = <&vreg_l11c_2p8>;
+ max-speed = <3200000>;
+ };
};
/* PINCTRL - additions to nodes defined in sc7280.dtsi */
@@ -504,6 +522,19 @@
*/
bias-pull-up;
};
+
+ bt_en_default: bt_en_default {
+ pinmux {
+ pins = "gpio85";
+ function = "gpio";
+ };
+ pinconf {
+ pins = "gpio85";
+ drive-strength = <2>;
+ output-low;
+ bias-pull-down;
+ };
+ };
};
&sdc1_on {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next reply other threads:[~2021-10-06 12:30 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-06 12:30 Balakrishna Godavarthi [this message]
2021-10-06 12:30 ` [PATCH v1 2/2] arm64: dts: qcom: sc7280: update bluetooth node in SC7280 IDP2 board Balakrishna Godavarthi
2021-10-06 16:48 ` Dmitry Baryshkov
2021-10-12 10:02 ` bgodavar
2021-10-06 17:39 ` Matthias Kaehlcke
2021-10-12 10:01 ` bgodavar
2021-10-06 17:26 ` [PATCH v1 1/2] arm64: dts: qcom: sc7280: Add bluetooth node on SC7280 IDP board Matthias Kaehlcke
2021-10-12 9:55 ` bgodavar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1633523403-32264-1-git-send-email-bgodavar@codeaurora.org \
--to=bgodavar@codeaurora.org \
--cc=abhishekpandit@chromium.org \
--cc=bjorn.andersson@linaro.org \
--cc=hemantg@codeaurora.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=mka@chromium.org \
--cc=pharish@codeaurora.org \
--cc=rjliao@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox