Re: [PATCH v2 1/3] dt-bindings: usb: qcom,dwc3: Add multi-pd bindings for dwc3 qcom

[Rob Herring <robh@kernel.org>]

On Mon, 25 Oct 2021 14:37:29 +0530, Sandeep Maheswaram wrote:
> Add multi pd bindings to set performance state for cx domain
> to maintain minimum corner voltage for USB clocks.
> 
> Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com>
> ---
> v2:
> Make cx domain mandatory.
> 
>  Documentation/devicetree/bindings/usb/qcom,dwc3.yaml | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml: properties:power-domains: 'oneOf' conditional failed, one must be fixed:
	[{'description': 'cx power domain'}, {'description': 'USB gdsc power domain'}] is too long
	[{'description': 'cx power domain'}, {'description': 'USB gdsc power domain'}] is too short
	False schema does not allow 2
	1 was expected
	hint: "minItems" is only needed if less than the "items" list length
	from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml: ignoring, error in schema: properties: power-domains
warning: no schema found in file: ./Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
Documentation/devicetree/bindings/usb/qcom,dwc3.example.dt.yaml:0:0: /example-0/soc/usb@a6f8800: failed to match any schema with compatible: ['qcom,sdm845-dwc3', 'qcom,dwc3']
Documentation/devicetree/bindings/usb/qcom,dwc3.example.dt.yaml:0:0: /example-0/soc/usb@a6f8800: failed to match any schema with compatible: ['qcom,sdm845-dwc3', 'qcom,dwc3']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1545621

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.