[PATCH v4 9/9] docs: fprobe: Add fprobe description to ftrace-use.rst

Masami Hiramatsu
2022-01-24T16:11:18Z

Add a documentation of fprobe for the user who needs
this interface.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
Documentation/trace/fprobe.rst | 131 ++++++++++++++++++++++++++++++++++++++++
Documentation/trace/index.rst | 1
2 files changed, 132 insertions(+)
create mode 100644 Documentation/trace/fprobe.rst

diff --git a/Documentation/trace/fprobe.rst b/Documentation/trace/fprobe.rst
new file mode 100644
index 000000000000..c53950a1f91e
--- /dev/null
+++ b/Documentation/trace/fprobe.rst
@@ -0,0 +1,131 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================================
+Fprobe - Function entry/exit probe
+==================================
+
+.. Author: Masami Hiramatsu <mhiramat@kernel.org>
+
+Introduction
+============
+
+Instead of using ftrace full feature, if you only want to attach callbacks
+on function entry and exit, similar to the kprobes and kretprobes, you can
+use fprobe. Compared with kprobes and kretprobes, fprobe gives faster
+instrumentation for multiple functions with single handler. This document
+describes how to use fprobe.
+
+The usage of fprobe
+===================
+
+The fprobe is a wrapper of ftrace (+ kretprobe-like return callback) to
+attach callbacks to multiple function entry and exit. User needs to set up
+the `struct fprobe` and pass it to `register_fprobe()`.
+
+Typically, `fprobe` data structure is initialized with the `syms`, `nentry`
+and `entry_handler` and/or `exit_handler` as below.
+
+.. code-block:: c
+
+ char targets[] = {"func1", "func2", "func3"};
+ struct fprobe fp = {
+ .syms = targets,
+ .nentry = ARRAY_SIZE(targets),
+ .entry_handler = my_entry_callback,
+ .exit_handler = my_exit_callback,
+ };
+
+The ftrace_ops in the fprobe is automatically set. The FTRACE_OPS_FL_SAVE_REGS
+and FTRACE_OPS_FL_RECURSION
+flag will be set. If you need other flags, please set it by yourself.
+
+.. code-block:: c
+
+ fp.ops.flags |= FTRACE_OPS_FL_RCU;
+
+To enable this fprobe, call::
+
+ register_fprobe(&fp);
+
+To disable (remove from functions) this fprobe, call::
+
+ unregister_fprobe(&fp);
+
+You can temporally (soft) disable the fprobe by::
+
+ disable_fprobe(&fp);
+
+and resume by::
+
+ enable_fprobe(&fp);
+
+The above is defined by including the header::
+
+ #include <linux/fprobe.h>
+
+Same as ftrace, the registered callback will start being called some time
+after the register_fprobe() is called and before it returns. See
+:file:`Documentation/trace/ftrace.rst`.
+
+
+The fprobe entry/exit handler
+=============================
+
+The prototype of the entry/exit callback function is as follows:
+
+.. code-block:: c
+
+ void callback_func(struct fprobe *fp, unsigned long entry_ip, struct pt_regs *regs);
+
+Note that both entry and exit callback has same ptototype. The @entry_ip is
+saved at function entry and passed to exit handler.
+
+@fp
+ This is the address of `fprobe` data structure related to this handler.
+ You can embed the `fprobe` to your data structure and get it by
+ container_of() macro from @fp. The @fp must not be NULL.
+
+@entry_ip
+ This is the entry address of the traced function (both entry and exit).
+
+@regs
+ This is the `pt_regs` data structure at the entry and exit. Note that
+ the instruction pointer of @regs may be different from the @entry_ip
+ in the entry_handler. If you need traced instruction pointer, you need
+ to use @entry_ip. On the other hand, in the exit_handler, the instruction
+ pointer of @regs is set to the currect return address.
+
+
+Use fprobe with raw address list
+================================
+
+Instead of passing the array of symbols, you can pass a array of raw
+function addresses via `fprobe::addrs`. In this case, the value of
+this array will be changed automatically to the dynamic ftrace NOP
+location addresses in the given kernel function. So please take care
+if you share this array with others.
+
+
+The missed counter
+==================
+
+The `fprobe` data structure has `fprobe::nmissed` counter field as same as
+kprobes.
+This counter counts up when;
+
+ - fprobe fails to take ftrace_recursion lock. This usually means that a function
+ which is traced by other ftrace users is called from the entry_handler.
+
+ - fprobe fails to setup the function exit because of the shortage of rethook
+ (the shadow stack for hooking the function return.)
+
+Note that `fprobe::nmissed` field is counted up in both case. The former case
+will skip both of entry and exit callback, and the latter case will skip exit
+callback, but in both case the counter is just increased by 1.
+
+Functions and structures
+========================
+
+.. kernel-doc:: include/linux/fprobe.h
+.. kernel-doc:: kernel/trace/fprobe.c
+
diff --git a/Documentation/trace/index.rst b/Documentation/trace/index.rst
index 3769b9b7aed8..b9f3757f8269 100644
--- a/Documentation/trace/index.rst
+++ b/Documentation/trace/index.rst
@@ -9,6 +9,7 @@ Linux Tracing Technologies
tracepoint-analysis
ftrace
ftrace-uses
+ fprobe
kprobes
kprobetrace
uprobetracer