Re: [PATCH v8 2/4] dt-bindings: phy: rockchip: Add Naneng combo PHY bindings

[Rob Herring <robh@kernel.org>]

On Tue, 08 Feb 2022 17:13:24 +0800, Yifeng Zhao wrote:
> Add the compatible strings for the Naneng combo PHY found on rockchip SoC.
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> ---
> 
> Changes in v8: None
> Changes in v7:
> - remove u3otg0_port_en, u3otg1_port_en and pipe_sgmii_mac_sel
> 
> Changes in v5:
> - modify description for ssc and ext-refclk
> - remove apb reset
> 
> Changes in v4:
> - restyle
> - remove some minItems
> - add more properties
> - remove reset-names
> - move #phy-cells
> - add rockchip,rk3568-pipe-grf
> - add rockchip,rk3568-pipe-phy-grf
> 
> Changes in v3: None
> Changes in v2:
> - Fix dtschema/dtc warnings/errors
> 
>  .../phy/phy-rockchip-naneng-combphy.yaml      | 109 ++++++++++++++++++
>  1 file changed, 109 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.example.dt.yaml:0:0: /example-0/syscon@fdc50000: failed to match any schema with compatible: ['rockchip,rk3568-pipe-grf', 'syscon']
Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.example.dt.yaml:0:0: /example-0/syscon@fdc70000: failed to match any schema with compatible: ['rockchip,rk3568-pipe-phy-grf', 'syscon']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1589719

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.