From: ksardem@linux01.gwdg.de
To: linux-kernel@vger.kernel.org
Cc: manfred@colorfullife.com
Subject: Re: bug in via-rhine network-driver (transmit timed out)
Date: Mon, 9 Dec 2002 17:54:07 +0100 [thread overview]
Message-ID: <1653237694.20021209175407@linux01.gwdg.de> (raw)
Hi,
I successfully got the old transmit-out-error again ;-)
- and this time with "options via-rhine debug=3" in modules.conf.
So here are the debug-messages:
dmesg:
eth0: Shutting down ethercard, status was 081a.
eth0: via_rhine_open() irq 9.
eth0: reset finished after 5 microseconds.
eth0: Done via_rhine_open(), status 081a MII status: 7809.
eth0: no IPv6 routers present
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 0000, PHY status 782d, resetting...
eth0: reset did not complete in 10 ms.
eth0: reset finished after 10005 microseconds.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 0000, PHY status 782d, resetting...
eth0: reset did not complete in 10 ms.
eth0: reset finished after 10005 microseconds.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 0000, PHY status 782d, resetting...
eth0: reset did not complete in 10 ms.
eth0: reset finished after 10005 microseconds.
eth0: Shutting down ethercard, status was 883a.
eth0: via_rhine_open() irq 9.
eth0: reset did not complete in 10 ms.
eth0: reset finished after 10005 microseconds.
eth0: Done via_rhine_open(), status 881a MII status: 782d.
eth0: no IPv6 routers present
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 0000, PHY status 782d, resetting...
eth0: reset did not complete in 10 ms.
eth0: reset finished after 10005 microseconds.
eth0: Shutting down ethercard, status was 883a.
eth0: via_rhine_open() irq 9.
eth0: reset did not complete in 10 ms.
eth0: reset finished after 10005 microseconds.
eth0: Done via_rhine_open(), status 881a MII status: 7829.
eth0: Shutting down ethercard, status was 883a.
lsmod was:
via-rhine 13612 2
mii 1232 0 [via-rhine]
--
Bye.
Kristof <ksardem@linux01.gwdg.de>
next reply other threads:[~2002-12-09 16:43 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-12-09 16:54 ksardem [this message]
2002-12-09 16:58 ` bug in via-rhine network-driver (transmit timed out) Jeff Garzik
2002-12-09 21:27 ` Re[2]: " Kristof Sardemann
2002-12-09 21:33 ` Adaptec 2940 not working on 2.5.50 David Lang
-- strict thread matches above, loose matches on Subject: below --
2002-11-17 9:37 bug in via-rhine network-driver (transmit timed out) Manfred Spraul
2002-11-17 8:30 Justin A
2002-11-17 7:59 ksardem
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1653237694.20021209175407@linux01.gwdg.de \
--to=ksardem@linux01.gwdg.de \
--cc=linux-kernel@vger.kernel.org \
--cc=manfred@colorfullife.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox