Re: [net-next v2 3/3] dt-bindings: net: adin1110: Add docs

[Rob Herring <robh@kernel.org>]

On Mon, 25 Jul 2022 19:53:12 +0300, alexandru.tachici@analog.com wrote:
> From: Alexandru Tachici <alexandru.tachici@analog.com>
> 
> Add bindings for the ADIN1110/2111 MAC-PHY/SWITCH.
> 
> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
> ---
>  .../devicetree/bindings/net/adi,adin1110.yaml | 81 +++++++++++++++++++
>  1 file changed, 81 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/adi,adin1110.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/net/adi,adin1110.example.dts:26.17-27: Warning (reg_format): /example-0/spi/ethernet@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/net/adi,adin1110.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/net/adi,adin1110.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/net/adi,adin1110.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/net/adi,adin1110.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/net/adi,adin1110.example.dts:23.13-39.11: Warning (spi_bus_bridge): /example-0/spi: incorrect #address-cells for SPI bus
Documentation/devicetree/bindings/net/adi,adin1110.example.dts:23.13-39.11: Warning (spi_bus_bridge): /example-0/spi: incorrect #size-cells for SPI bus
Documentation/devicetree/bindings/net/adi,adin1110.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/net/adi,adin1110.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge'
Documentation/devicetree/bindings/net/adi,adin1110.example.dts:24.24-38.15: Warning (avoid_default_addr_size): /example-0/spi/ethernet@0: Relying on default #address-cells value
Documentation/devicetree/bindings/net/adi,adin1110.example.dts:24.24-38.15: Warning (avoid_default_addr_size): /example-0/spi/ethernet@0: Relying on default #size-cells value
Documentation/devicetree/bindings/net/adi,adin1110.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/adi,adin1110.example.dtb: ethernet@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected)
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/adi,adin1110.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.