From: Matthias Brugger <matthias.bgg@gmail.com>
To: Mars Cheng <mars.cheng@mediatek.com>
Cc: srv_wsdupstream@mediatek.com, cc.hwang@mediatek.com,
linux-kernel@vger.kernel.org, jades.shih@mediatek.com,
scott.shu@mediatek.com, miles.chen@mediatek.com,
linux-mediatek@lists.infradead.org, my.chung@mediatek.com,
yingjoe.chen@mediatek.com, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 2/2] ARM: dts: mediatek: add 6580 support
Date: Sat, 04 Jul 2015 00:03:45 +0200 [thread overview]
Message-ID: <1665353.lNSALdu3Cy@ubix> (raw)
In-Reply-To: <1435647751-20422-3-git-send-email-mars.cheng@mediatek.com>
On Tuesday, June 30, 2015 03:02:31 PM Mars Cheng wrote:
> This adds basic chip support for Mediatek 6580.
>
> Change-Id: Ic5c93eb5d1e6e23503dabd28d41c30a7f02e9c18
Please delete the change-id.
> Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/mt6580-evbp1.dts | 35 +++++++++++
> arch/arm/boot/dts/mt6580.dtsi | 125
> +++++++++++++++++++++++++++++++++++++ 3 files changed, 161 insertions(+)
> create mode 100644 arch/arm/boot/dts/mt6580-evbp1.dts
> create mode 100644 arch/arm/boot/dts/mt6580.dtsi
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 86217db..9298531 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -656,6 +656,7 @@ dtb-$(CONFIG_MACH_DOVE) += \
> dove-d3plug.dtb \
> dove-dove-db.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += \
> + mt6580-evbp1.dtb \
> mt6589-aquaris5.dtb \
> mt6592-evb.dtb \
> mt8127-moose.dtb \
> diff --git a/arch/arm/boot/dts/mt6580-evbp1.dts
> b/arch/arm/boot/dts/mt6580-evbp1.dts new file mode 100644
> index 0000000..8c42335
> --- /dev/null
> +++ b/arch/arm/boot/dts/mt6580-evbp1.dts
> @@ -0,0 +1,35 @@
> +/*
> + * Copyright (c) 2015 MediaTek Inc.
> + * Author: Mars.C <mars.cheng@mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +/dts-v1/;
> +#include "mt6580.dtsi"
> +
> +/ {
> + model = "MediaTek MT6580 evaluation board";
> + compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
> +
> + chosen {
> + bootargs = "console=ttyS0,921600n8 earlyprintk";
> + stdout-path = &uart0;
> + };
> +
> + memory {
> + reg = <0x80000000 0x20000000>;
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> diff --git a/arch/arm/boot/dts/mt6580.dtsi b/arch/arm/boot/dts/mt6580.dtsi
> new file mode 100644
> index 0000000..ac97d64
> --- /dev/null
> +++ b/arch/arm/boot/dts/mt6580.dtsi
> @@ -0,0 +1,125 @@
> +/*
> + * Copyright (c) 2015 MediaTek Inc.
> + * Author: Mars.C <mars.cheng@mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include "skeleton.dtsi"
> +
> +/ {
> + compatible = "mediatek,mt6580";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-parent = <&sysirq>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x0>;
> + };
> + cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x1>;
> + };
> + cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x2>;
> + };
> + cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x3>;
> + };
> +
> + };
> +
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> + ranges;
> +
> + system_clk: dummy13m {
> + compatible = "fixed-clock";
> + clock-frequency = <13000000>;
> + #clock-cells = <0>;
> + };
> +
> + rtc_clk: dummy32k {
> + compatible = "fixed-clock";
> + clock-frequency = <32000>;
> + #clock-cells = <0>;
> + };
> +
> + uart_clk: dummy26m {
> + compatible = "fixed-clock";
> + clock-frequency = <26000000>;
> + #clock-cells = <0>;
> + };
> + };
> +
> + timer: timer@10008000 {
> + compatible = "mediatek,mt6580-timer",
> + "mediatek,mt6577-timer";
> + reg = <0x10008000 0x80>;
> + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&system_clk>, <&rtc_clk>;
> + clock-names = "system-clk", "rtc-clk";
> + };
> +
> + sysirq: interrupt-controller@10200100 {
> + compatible = "mediatek,mt6580-sysirq",
> + "mediatek,mt6577-sysirq";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + reg = <0x10200100 0x1c>;
> + };
> +
> + gic: interrupt-controller@10211000 {
> + compatible = "arm,cortex-a7-gic";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + reg = <0x10211000 0x1000>,
> + <0x10212000 0x1000>,
> + <0x10214000 0x2000>,
> + <0x10216000 0x2000>;
> + };
> +
> + uart0: serial@11005000 {
> + compatible = "mediatek,mt6580-uart",
> + "mediatek,mt6577-uart";
Please update the dts documentation about the compatible string.
Apart from that it looks fine for me.
Cheers,
Matthias
next prev parent reply other threads:[~2015-07-03 22:03 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-30 7:02 [PATCH v2 0/2] Add mt6580 basic chip support Mars Cheng
2015-06-30 7:02 ` [PATCH v2 1/2] Document: DT: Add bindings for mediatek MT6580 SoC Platform Mars Cheng
2015-06-30 7:02 ` [PATCH v2 2/2] ARM: dts: mediatek: add 6580 support Mars Cheng
2015-07-03 22:03 ` Matthias Brugger [this message]
2015-07-06 0:53 ` Mars Cheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1665353.lNSALdu3Cy@ubix \
--to=matthias.bgg@gmail.com \
--cc=cc.hwang@mediatek.com \
--cc=jades.shih@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=mars.cheng@mediatek.com \
--cc=miles.chen@mediatek.com \
--cc=my.chung@mediatek.com \
--cc=scott.shu@mediatek.com \
--cc=srv_wsdupstream@mediatek.com \
--cc=yingjoe.chen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox