Re: Linux 5.15.89

Greg Kroah-Hartman
2023-01-18T11:46:54Z

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index 35426fde8610..283a12cd3e14 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -31,7 +31,7 @@ properties:
- description: Display byte clock
- description: Display byte interface clock
- description: Display pixel clock
- - description: Display escape clock
+ - description: Display core clock
- description: Display AHB clock
- description: Display AXI clock

@@ -135,8 +135,6 @@ required:
- phy-names
- assigned-clocks
- assigned-clock-parents
- - power-domains
- - operating-points-v2
- ports

additionalProperties: false
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
index 4399715953e1..4dd5eed50506 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
@@ -39,7 +39,6 @@ required:
- compatible
- reg
- reg-names
- - vdds-supply

unevaluatedProperties: false

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
index 064df50e21a5..23355ac67d3d 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
@@ -37,7 +37,6 @@ required:
- compatible
- reg
- reg-names
- - vcca-supply

unevaluatedProperties: false

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
index 69eecaa64b18..ddb0ac4c29d4 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
@@ -34,6 +34,10 @@ properties:
vddio-supply:
description: Phandle to vdd-io regulator device node.

+ qcom,dsi-phy-regulator-ldo-mode:
+ type: boolean
+ description: Indicates if the LDO mode PHY regulator is wanted.
+
required:
- compatible
- reg
diff --git a/Documentation/sphinx/load_config.py b/Documentation/sphinx/load_config.py
index eeb394b39e2c..8b416bfd75ac 100644
--- a/Documentation/sphinx/load_config.py
+++ b/Documentation/sphinx/load_config.py
@@ -3,7 +3,7 @@

import os
import sys
-from sphinx.util.pycompat import execfile_
+from sphinx.util.osutil import fs_encoding

# ------------------------------------------------------------------------------
def loadConfig(namespace):
@@ -48,7 +48,9 @@ def loadConfig(namespace):
sys.stdout.write("load additional sphinx-config: %s\n" % config_file)
config = namespace.copy()
config['__file__'] = config_file
- execfile_(config_file, config)
+ with open(config_file, 'rb') as f:
+ code = compile(f.read(), fs_encoding, 'exec')
+ exec(code, config)
del config['__file__']
namespace.update(config)
else:
diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
index a6729c8cf063..b550f43214c7 100644
--- a/Documentation/virt/kvm/api.rst
+++ b/Documentation/virt/kvm/api.rst
@@ -7265,3 +7265,63 @@ The argument to KVM_ENABLE_CAP is also a bitmask, and must be a subset
of the result of KVM_CHECK_EXTENSION. KVM will forward to userspace
the hypercalls whose corresponding bit is in the argument, and return
ENOSYS for the others.
+
+9. Known KVM API problems
+=========================
+
+In some cases, KVM's API has some inconsistencies or common pitfalls
+that userspace need to be aware of. This section details some of
+these issues.
+
+Most of them are architecture specific, so the section is split by
+architecture.
+
+9.1. x86
+--------
+
+``KVM_GET_SUPPORTED_CPUID`` issues
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+In general, ``KVM_GET_SUPPORTED_CPUID`` is designed so that it is possible
+to take its result and pass it directly to ``KVM_SET_CPUID2``. This section
+documents some cases in which that requires some care.
+
+Local APIC features
+~~~~~~~~~~~~~~~~~~~
+
+CPU[EAX=1]:ECX[21] (X2APIC) is reported by ``KVM_GET_SUPPORTED_CPUID``,
+but it can only be enabled if ``KVM_CREATE_IRQCHIP`` or
+``KVM_ENABLE_CAP(KVM_CAP_IRQCHIP_SPLIT)`` are used to enable in-kernel emulation of
+the local APIC.
+
+The same is true for the ``KVM_FEATURE_PV_UNHALT`` paravirtualized feature.
+
+CPU[EAX=1]:ECX[24] (TSC_DEADLINE) is not reported by ``KVM_GET_SUPPORTED_CPUID``.
+It can be enabled if ``KVM_CAP_TSC_DEADLINE_TIMER`` is present and the kernel
+has enabled in-kernel emulation of the local APIC.
+
+CPU topology
+~~~~~~~~~~~~
+
+Several CPUID values include topology information for the host CPU:
+0x0b and 0x1f for Intel systems, 0x8000001e for AMD systems. Different
+versions of KVM return different values for this information and userspace
+should not rely on it. Currently they return all zeroes.
+
+If userspace wishes to set up a guest topology, it should be careful that
+the values of these three leaves differ for each CPU. In particular,
+the APIC ID is found in EDX for all subleaves of 0x0b and 0x1f, and in EAX
+for 0x8000001e; the latter also encodes the core id and node id in bits
+7:0 of EBX and ECX respectively.
+
+Obsolete ioctls and capabilities
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+KVM_CAP_DISABLE_QUIRKS does not let userspace know which quirks are actually
+available. Use ``KVM_CHECK_EXTENSION(KVM_CAP_DISABLE_QUIRKS2)`` instead if
+available.
+
+Ordering of KVM_GET_*/KVM_SET_* ioctls
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+TBD
diff --git a/Makefile b/Makefile
index f7ff35b0cf6f..9ebe9ddb8641 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
VERSION = 5
PATCHLEVEL = 15
-SUBLEVEL = 88
+SUBLEVEL = 89
EXTRAVERSION =
NAME = Trick or Treat

diff --git a/arch/arm64/include/asm/atomic_ll_sc.h b/arch/arm64/include/asm/atomic_ll_sc.h
index 13869b76b58c..abd302e521c0 100644
--- a/arch/arm64/include/asm/atomic_ll_sc.h
+++ b/arch/arm64/include/asm/atomic_ll_sc.h
@@ -12,19 +12,6 @@

#include <linux/stringify.h>

-#ifdef CONFIG_ARM64_LSE_ATOMICS
-#define __LL_SC_FALLBACK(asm_ops) \
-" b 3f\n" \
-" .subsection 1\n" \
-"3:\n" \
-asm_ops "\n" \
-" b 4f\n" \
-" .previous\n" \
-"4:\n"
-#else
-#define __LL_SC_FALLBACK(asm_ops) asm_ops
-#endif
-
#ifndef CONFIG_CC_HAS_K_CONSTRAINT
#define K
#endif
@@ -43,12 +30,11 @@ __ll_sc_atomic_##op(int i, atomic_t *v) \
int result; \
\
asm volatile("// atomic_" #op "\n" \
- __LL_SC_FALLBACK( \
-" prfm pstl1strm, %2\n" \
-"1: ldxr %w0, %2\n" \
-" " #asm_op " %w0, %w0, %w3\n" \
-" stxr %w1, %w0, %2\n" \
-" cbnz %w1, 1b\n") \
+ " prfm pstl1strm, %2\n" \
+ "1: ldxr %w0, %2\n" \
+ " " #asm_op " %w0, %w0, %w3\n" \
+ " stxr %w1, %w0, %2\n" \
+ " cbnz %w1, 1b\n" \
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter) \
: __stringify(constraint) "r" (i)); \
}
@@ -61,13 +47,12 @@ __ll_sc_atomic_##op##_return##name(int i, atomic_t *v) \
int result; \
\
asm volatile("// atomic_" #op "_return" #name "\n" \
- __LL_SC_FALLBACK( \
-" prfm pstl1strm, %2\n" \
-"1: ld" #acq "xr %w0, %2\n" \
-" " #asm_op " %w0, %w0, %w3\n" \
-" st" #rel "xr %w1, %w0, %2\n" \
-" cbnz %w1, 1b\n" \
-" " #mb ) \
+ " prfm pstl1strm, %2\n" \
+ "1: ld" #acq "xr %w0, %2\n" \
+ " " #asm_op " %w0, %w0, %w3\n" \
+ " st" #rel "xr %w1, %w0, %2\n" \
+ " cbnz %w1, 1b\n" \
+ " " #mb \
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter) \
: __stringify(constraint) "r" (i) \
: cl); \
@@ -83,13 +68,12 @@ __ll_sc_atomic_fetch_##op##name(int i, atomic_t *v) \
int val, result; \
\
asm volatile("// atomic_fetch_" #op #name "\n" \
- __LL_SC_FALLBACK( \
-" prfm pstl1strm, %3\n" \
-"1: ld" #acq "xr %w0, %3\n" \
-" " #asm_op " %w1, %w0, %w4\n" \
-" st" #rel "xr %w2, %w1, %3\n" \
-" cbnz %w2, 1b\n" \
-" " #mb ) \
+ " prfm pstl1strm, %3\n" \
+ "1: ld" #acq "xr %w0, %3\n" \
+ " " #asm_op " %w1, %w0, %w4\n" \
+ " st" #rel "xr %w2, %w1, %3\n" \
+ " cbnz %w2, 1b\n" \
+ " " #mb \
: "=&r" (result), "=&r" (val), "=&r" (tmp), "+Q" (v->counter) \
: __stringify(constraint) "r" (i) \
: cl); \
@@ -142,12 +126,11 @@ __ll_sc_atomic64_##op(s64 i, atomic64_t *v) \
unsigned long tmp; \
\
asm volatile("// atomic64_" #op "\n" \
- __LL_SC_FALLBACK( \
-" prfm pstl1strm, %2\n" \
-"1: ldxr %0, %2\n" \
-" " #asm_op " %0, %0, %3\n" \
-" stxr %w1, %0, %2\n" \
-" cbnz %w1, 1b") \
+ " prfm pstl1strm, %2\n" \
+ "1: ldxr %0, %2\n" \
+ " " #asm_op " %0, %0, %3\n" \
+ " stxr %w1, %0, %2\n" \
+ " cbnz %w1, 1b" \
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter) \
: __stringify(constraint) "r" (i)); \
}
@@ -160,13 +143,12 @@ __ll_sc_atomic64_##op##_return##name(s64 i, atomic64_t *v) \
unsigned long tmp; \
\
asm volatile("// atomic64_" #op "_return" #name "\n" \
- __LL_SC_FALLBACK( \
-" prfm pstl1strm, %2\n" \
-"1: ld" #acq "xr %0, %2\n" \
-" " #asm_op " %0, %0, %3\n" \
-" st" #rel "xr %w1, %0, %2\n" \
-" cbnz %w1, 1b\n" \
-" " #mb ) \
+ " prfm pstl1strm, %2\n" \
+ "1: ld" #acq "xr %0, %2\n" \
+ " " #asm_op " %0, %0, %3\n" \
+ " st" #rel "xr %w1, %0, %2\n" \
+ " cbnz %w1, 1b\n" \
+ " " #mb \
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter) \
: __stringify(constraint) "r" (i) \
: cl); \
@@ -176,19 +158,18 @@ __ll_sc_atomic64_##op##_return##name(s64 i, atomic64_t *v) \

#define ATOMIC64_FETCH_OP(name, mb, acq, rel, cl, op, asm_op, constraint)\
static inline long \
-__ll_sc_atomic64_fetch_##op##name(s64 i, atomic64_t *v) \
+__ll_sc_atomic64_fetch_##op##name(s64 i, atomic64_t *v) \
{ \
s64 result, val; \
unsigned long tmp; \
\
asm volatile("// atomic64_fetch_" #op #name "\n" \
- __LL_SC_FALLBACK( \
-" prfm pstl1strm, %3\n" \
-"1: ld" #acq "xr %0, %3\n" \
-" " #asm_op " %1, %0, %4\n" \
-" st" #rel "xr %w2, %1, %3\n" \
-" cbnz %w2, 1b\n" \
-" " #mb ) \
+ " prfm pstl1strm, %3\n" \
+ "1: ld" #acq "xr %0, %3\n" \
+ " " #asm_op " %1, %0, %4\n" \
+ " st" #rel "xr %w2, %1, %3\n" \
+ " cbnz %w2, 1b\n" \
+ " " #mb \
: "=&r" (result), "=&r" (val), "=&r" (tmp), "+Q" (v->counter) \
: __stringify(constraint) "r" (i) \
: cl); \
@@ -240,15 +221,14 @@ __ll_sc_atomic64_dec_if_positive(atomic64_t *v)
unsigned long tmp;

asm volatile("// atomic64_dec_if_positive\n"
- __LL_SC_FALLBACK(
-" prfm pstl1strm, %2\n"
-"1: ldxr %0, %2\n"
-" subs %0, %0, #1\n"
-" b.lt 2f\n"
-" stlxr %w1, %0, %2\n"
-" cbnz %w1, 1b\n"
-" dmb ish\n"
-"2:")
+ " prfm pstl1strm, %2\n"
+ "1: ldxr %0, %2\n"
+ " subs %0, %0, #1\n"
+ " b.lt 2f\n"
+ " stlxr %w1, %0, %2\n"
+ " cbnz %w1, 1b\n"
+ " dmb ish\n"
+ "2:"
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
:
: "cc", "memory");
@@ -274,7 +254,6 @@ __ll_sc__cmpxchg_case_##name##sz(volatile void *ptr, \
old = (u##sz)old; \
\
asm volatile( \
- __LL_SC_FALLBACK( \
" prfm pstl1strm, %[v]\n" \
"1: ld" #acq "xr" #sfx "\t%" #w "[oldval], %[v]\n" \
" eor %" #w "[tmp], %" #w "[oldval], %" #w "[old]\n" \
@@ -282,7 +261,7 @@ __ll_sc__cmpxchg_case_##name##sz(volatile void *ptr, \
" st" #rel "xr" #sfx "\t%w[tmp], %" #w "[new], %[v]\n" \
" cbnz %w[tmp], 1b\n" \
" " #mb "\n" \
- "2:") \
+ "2:" \
: [tmp] "=&r" (tmp), [oldval] "=&r" (oldval), \
[v] "+Q" (*(u##sz *)ptr) \
: [old] __stringify(constraint) "r" (old), [new] "r" (new) \
@@ -326,7 +305,6 @@ __ll_sc__cmpxchg_double##name(unsigned long old1, \
unsigned long tmp, ret; \
\
asm volatile("// __cmpxchg_double" #name "\n" \
- __LL_SC_FALLBACK( \
" prfm pstl1strm, %2\n" \
"1: ldxp %0, %1, %2\n" \
" eor %0, %0, %3\n" \
@@ -336,8 +314,8 @@ __ll_sc__cmpxchg_double##name(unsigned long old1, \
" st" #rel "xp %w0, %5, %6, %2\n" \
" cbnz %w0, 1b\n" \
" " #mb "\n" \
- "2:") \
- : "=&r" (tmp), "=&r" (ret), "+Q" (*(unsigned long *)ptr) \
+ "2:" \
+ : "=&r" (tmp), "=&r" (ret), "+Q" (*(__uint128_t *)ptr) \
: "r" (old1), "r" (old2), "r" (new1), "r" (new2) \
: cl); \
\
diff --git a/arch/arm64/include/asm/atomic_lse.h b/arch/arm64/include/asm/atomic_lse.h
index da3280f639cd..28e96118c1e5 100644
--- a/arch/arm64/include/asm/atomic_lse.h
+++ b/arch/arm64/include/asm/atomic_lse.h
@@ -11,11 +11,11 @@
#define __ASM_ATOMIC_LSE_H

#define ATOMIC_OP(op, asm_op) \
-static inline void __lse_atomic_##op(int i, atomic_t *v) \
+static inline void __lse_atomic_##op(int i, atomic_t *v) \
{ \
asm volatile( \
__LSE_PREAMBLE \
-" " #asm_op " %w[i], %[v]\n" \
+ " " #asm_op " %w[i], %[v]\n" \
: [i] "+r" (i), [v] "+Q" (v->counter) \
: "r" (v)); \
}
@@ -32,7 +32,7 @@ static inline int __lse_atomic_fetch_##op##name(int i, atomic_t *v) \
{ \
asm volatile( \
__LSE_PREAMBLE \
-" " #asm_op #mb " %w[i], %w[i], %[v]" \
+ " " #asm_op #mb " %w[i], %w[i], %[v]" \
: [i] "+r" (i), [v] "+Q" (v->counter) \
: "r" (v) \
: cl); \
@@ -130,7 +130,7 @@ static inline int __lse_atomic_sub_return##name(int i, atomic_t *v) \
" add %w[i], %w[i], %w[tmp]" \
: [i] "+&r" (i), [v] "+Q" (v->counter), [tmp] "=&r" (tmp) \
: "r" (v) \
- : cl); \
+ : cl); \
\
return i; \
}
@@ -168,7 +168,7 @@ static inline void __lse_atomic64_##op(s64 i, atomic64_t *v) \
{ \
asm volatile( \
__LSE_PREAMBLE \
-" " #asm_op " %[i], %[v]\n" \
+ " " #asm_op " %[i], %[v]\n" \
: [i] "+r" (i), [v] "+Q" (v->counter) \
: "r" (v)); \
}
@@ -185,7 +185,7 @@ static inline long __lse_atomic64_fetch_##op##name(s64 i, atomic64_t *v)\
{ \
asm volatile( \
__LSE_PREAMBLE \
-" " #asm_op #mb " %[i], %[i], %[v]" \
+ " " #asm_op #mb " %[i], %[i], %[v]" \
: [i] "+r" (i), [v] "+Q" (v->counter) \
: "r" (v) \
: cl); \
@@ -272,7 +272,7 @@ static inline void __lse_atomic64_sub(s64 i, atomic64_t *v)
}

#define ATOMIC64_OP_SUB_RETURN(name, mb, cl...) \
-static inline long __lse_atomic64_sub_return##name(s64 i, atomic64_t *v) \
+static inline long __lse_atomic64_sub_return##name(s64 i, atomic64_t *v)\
{ \
unsigned long tmp; \
\
@@ -403,7 +403,7 @@ __lse__cmpxchg_double##name(unsigned long old1, \
" eor %[old2], %[old2], %[oldval2]\n" \
" orr %[old1], %[old1], %[old2]" \
: [old1] "+&r" (x0), [old2] "+&r" (x1), \
- [v] "+Q" (*(unsigned long *)ptr) \
+ [v] "+Q" (*(__uint128_t *)ptr) \
: [new1] "r" (x2), [new2] "r" (x3), [ptr] "r" (x4), \
[oldval1] "r" (oldval1), [oldval2] "r" (oldval2) \
: cl); \
diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
index fd418955e31e..64f8a90d3327 100644
--- a/arch/arm64/include/asm/kvm_emulate.h
+++ b/arch/arm64/include/asm/kvm_emulate.h
@@ -366,8 +366,26 @@ static __always_inline int kvm_vcpu_sys_get_rt(struct kvm_vcpu *vcpu)

static inline bool kvm_is_write_fault(struct kvm_vcpu *vcpu)
{
- if (kvm_vcpu_abt_iss1tw(vcpu))
- return true;
+ if (kvm_vcpu_abt_iss1tw(vcpu)) {
+ /*
+ * Only a permission fault on a S1PTW should be
+ * considered as a write. Otherwise, page tables baked
+ * in a read-only memslot will result in an exception
+ * being delivered in the guest.
+ *
+ * The drawback is that we end-up faulting twice if the
+ * guest is using any of HW AF/DB: a translation fault
+ * to map the page containing the PT (read only at
+ * first), then a permission fault to allow the flags
+ * to be set.
+ */
+ switch (kvm_vcpu_trap_get_fault_type(vcpu)) {
+ case ESR_ELx_FSC_PERM:
+ return true;
+ default:
+ return false;
+ }
+ }

if (kvm_vcpu_trap_is_iabt(vcpu))
return false;
diff --git a/arch/arm64/kvm/hyp/nvhe/Makefile b/arch/arm64/kvm/hyp/nvhe/Makefile
index 8d741f71377f..964c2134ea1e 100644
--- a/arch/arm64/kvm/hyp/nvhe/Makefile
+++ b/arch/arm64/kvm/hyp/nvhe/Makefile
@@ -83,6 +83,10 @@ quiet_cmd_hypcopy = HYPCOPY $@
# Remove ftrace, Shadow Call Stack, and CFI CFLAGS.
# This is equivalent to the 'notrace', '__noscs', and '__nocfi' annotations.
KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_FTRACE) $(CC_FLAGS_SCS) $(CC_FLAGS_CFI), $(KBUILD_CFLAGS))
+# Starting from 13.0.0 llvm emits SHT_REL section '.llvm.call-graph-profile'
+# when profile optimization is applied. gen-hyprel does not support SHT_REL and
+# causes a build failure. Remove profile optimization flags.
+KBUILD_CFLAGS := $(filter-out -fprofile-sample-use=% -fprofile-use=%, $(KBUILD_CFLAGS))

# KVM nVHE code is run at a different exception code with a different map, so
# compiler instrumentation that inserts callbacks or checks into the code may
diff --git a/arch/powerpc/include/asm/imc-pmu.h b/arch/powerpc/include/asm/imc-pmu.h
index 4f897993b710..699a88584ae1 100644
--- a/arch/powerpc/include/asm/imc-pmu.h
+++ b/arch/powerpc/include/asm/imc-pmu.h
@@ -137,7 +137,7 @@ struct imc_pmu {
* are inited.
*/
struct imc_pmu_ref {
- struct mutex lock;
+ spinlock_t lock;
unsigned int id;
int refc;
};
diff --git a/arch/powerpc/perf/imc-pmu.c b/arch/powerpc/perf/imc-pmu.c
index e7583fbcc8fa..6ec93eec03ea 100644
--- a/arch/powerpc/perf/imc-pmu.c
+++ b/arch/powerpc/perf/imc-pmu.c
@@ -13,6 +13,7 @@
#include <asm/cputhreads.h>
#include <asm/smp.h>
#include <linux/string.h>
+#include <linux/spinlock.h>

/* Nest IMC data structures and variables */

@@ -20,7 +21,7 @@
* Used to avoid races in counting the nest-pmu units during hotplug
* register and unregister
*/
-static DEFINE_MUTEX(nest_init_lock);
+static DEFINE_SPINLOCK(nest_init_lock);
static DEFINE_PER_CPU(struct imc_pmu_ref *, local_nest_imc_refc);
static struct imc_pmu **per_nest_pmu_arr;
static cpumask_t nest_imc_cpumask;
@@ -49,7 +50,7 @@ static int trace_imc_mem_size;
* core and trace-imc
*/
static struct imc_pmu_ref imc_global_refc = {
- .lock = __MUTEX_INITIALIZER(imc_global_refc.lock),
+ .lock = __SPIN_LOCK_INITIALIZER(imc_global_refc.lock),
.id = 0,
.refc = 0,
};
@@ -393,7 +394,7 @@ static int ppc_nest_imc_cpu_offline(unsigned int cpu)
get_hard_smp_processor_id(cpu));
/*
* If this is the last cpu in this chip then, skip the reference
- * count mutex lock and make the reference count on this chip zero.
+ * count lock and make the reference count on this chip zero.
*/
ref = get_nest_pmu_ref(cpu);
if (!ref)
@@ -455,15 +456,15 @@ static void nest_imc_counters_release(struct perf_event *event)
/*
* See if we need to disable the nest PMU.
* If no events are currently in use, then we have to take a
- * mutex to ensure that we don't race with another task doing
+ * lock to ensure that we don't race with another task doing
* enable or disable the nest counters.
*/
ref = get_nest_pmu_ref(event->cpu);
if (!ref)
return;

- /* Take the mutex lock for this node and then decrement the reference count */
- mutex_lock(&ref->lock);
+ /* Take the lock for this node and then decrement the reference count */
+ spin_lock(&ref->lock);
if (ref->refc == 0) {
/*
* The scenario where this is true is, when perf session is
@@ -475,7 +476,7 @@ static void nest_imc_counters_release(struct perf_event *event)
* an OPAL call to disable the engine in that node.
*
*/
- mutex_unlock(&ref->lock);
+ spin_unlock(&ref->lock);
return;
}
ref->refc--;
@@ -483,7 +484,7 @@ static void nest_imc_counters_release(struct perf_event *event)
rc = opal_imc_counters_stop(OPAL_IMC_COUNTERS_NEST,
get_hard_smp_processor_id(event->cpu));
if (rc) {
- mutex_unlock(&ref->lock);
+ spin_unlock(&ref->lock);
pr_err("nest-imc: Unable to stop the counters for core %d\n", node_id);
return;
}
@@ -491,7 +492,7 @@ static void nest_imc_counters_release(struct perf_event *event)
WARN(1, "nest-imc: Invalid event reference count\n");
ref->refc = 0;
}
- mutex_unlock(&ref->lock);
+ spin_unlock(&ref->lock);
}

static int nest_imc_event_init(struct perf_event *event)
@@ -550,26 +551,25 @@ static int nest_imc_event_init(struct perf_event *event)

/*
* Get the imc_pmu_ref struct for this node.
- * Take the mutex lock and then increment the count of nest pmu events
- * inited.
+ * Take the lock and then increment the count of nest pmu events inited.
*/
ref = get_nest_pmu_ref(event->cpu);
if (!ref)
return -EINVAL;

- mutex_lock(&ref->lock);
+ spin_lock(&ref->lock);
if (ref->refc == 0) {
rc = opal_imc_counters_start(OPAL_IMC_COUNTERS_NEST,
get_hard_smp_processor_id(event->cpu));
if (rc) {
- mutex_unlock(&ref->lock);
+ spin_unlock(&ref->lock);
pr_err("nest-imc: Unable to start the counters for node %d\n",
node_id);
return rc;
}
}
++ref->refc;
- mutex_unlock(&ref->lock);
+ spin_unlock(&ref->lock);

event->destroy = nest_imc_counters_release;
return 0;
@@ -605,9 +605,8 @@ static int core_imc_mem_init(int cpu, int size)
return -ENOMEM;
mem_info->vbase = page_address(page);

- /* Init the mutex */
core_imc_refc[core_id].id = core_id;
- mutex_init(&core_imc_refc[core_id].lock);
+ spin_lock_init(&core_imc_refc[core_id].lock);

rc = opal_imc_counters_init(OPAL_IMC_COUNTERS_CORE,
__pa((void *)mem_info->vbase),
@@ -696,9 +695,8 @@ static int ppc_core_imc_cpu_offline(unsigned int cpu)
perf_pmu_migrate_context(&core_imc_pmu->pmu, cpu, ncpu);
} else {
/*
- * If this is the last cpu in this core then, skip taking refernce
- * count mutex lock for this core and directly zero "refc" for
- * this core.
+ * If this is the last cpu in this core then skip taking reference
+ * count lock for this core and directly zero "refc" for this core.
*/
opal_imc_counters_stop(OPAL_IMC_COUNTERS_CORE,
get_hard_smp_processor_id(cpu));
@@ -713,11 +711,11 @@ static int ppc_core_imc_cpu_offline(unsigned int cpu)
* last cpu in this core and core-imc event running
* in this cpu.
*/
- mutex_lock(&imc_global_refc.lock);
+ spin_lock(&imc_global_refc.lock);
if (imc_global_refc.id == IMC_DOMAIN_CORE)
imc_global_refc.refc--;

- mutex_unlock(&imc_global_refc.lock);
+ spin_unlock(&imc_global_refc.lock);
}
return 0;
}
@@ -732,7 +730,7 @@ static int core_imc_pmu_cpumask_init(void)

static void reset_global_refc(struct perf_event *event)
{
- mutex_lock(&imc_global_refc.lock);
+ spin_lock(&imc_global_refc.lock);
imc_global_refc.refc--;

/*
@@ -744,7 +742,7 @@ static void reset_global_refc(struct perf_event *event)
imc_global_refc.refc = 0;
imc_global_refc.id = 0;
}
- mutex_unlock(&imc_global_refc.lock);
+ spin_unlock(&imc_global_refc.lock);
}

static void core_imc_counters_release(struct perf_event *event)
@@ -757,17 +755,17 @@ static void core_imc_counters_release(struct perf_event *event)
/*
* See if we need to disable the IMC PMU.
* If no events are currently in use, then we have to take a
- * mutex to ensure that we don't race with another task doing
+ * lock to ensure that we don't race with another task doing
* enable or disable the core counters.
*/
core_id = event->cpu / threads_per_core;

- /* Take the mutex lock and decrement the refernce count for this core */
+ /* Take the lock and decrement the refernce count for this core */
ref = &core_imc_refc[core_id];
if (!ref)
return;

- mutex_lock(&ref->lock);
+ spin_lock(&ref->lock);
if (ref->refc == 0) {
/*
* The scenario where this is true is, when perf session is
@@ -779,7 +777,7 @@ static void core_imc_counters_release(struct perf_event *event)
* an OPAL call to disable the engine in that core.
*
*/
- mutex_unlock(&ref->lock);
+ spin_unlock(&ref->lock);
return;
}
ref->refc--;
@@ -787,7 +785,7 @@ static void core_imc_counters_release(struct perf_event *event)
rc = opal_imc_counters_stop(OPAL_IMC_COUNTERS_CORE,
get_hard_smp_processor_id(event->cpu));
if (rc) {
- mutex_unlock(&ref->lock);
+ spin_unlock(&ref->lock);
pr_err("IMC: Unable to stop the counters for core %d\n", core_id);
return;
}
@@ -795,7 +793,7 @@ static void core_imc_counters_release(struct perf_event *event)
WARN(1, "core-imc: Invalid event reference count\n");
ref->refc = 0;
}
- mutex_unlock(&ref->lock);
+ spin_unlock(&ref->lock);

reset_global_refc(event);
}
@@ -833,7 +831,6 @@ static int core_imc_event_init(struct perf_event *event)
if ((!pcmi->vbase))
return -ENODEV;

- /* Get the core_imc mutex for this core */
ref = &core_imc_refc[core_id];
if (!ref)
return -EINVAL;
@@ -841,22 +838,22 @@ static int core_imc_event_init(struct perf_event *event)
/*
* Core pmu units are enabled only when it is used.
* See if this is triggered for the first time.
- * If yes, take the mutex lock and enable the core counters.
+ * If yes, take the lock and enable the core counters.
* If not, just increment the count in core_imc_refc struct.
*/
- mutex_lock(&ref->lock);
+ spin_lock(&ref->lock);
if (ref->refc == 0) {
rc = opal_imc_counters_start(OPAL_IMC_COUNTERS_CORE,
get_hard_smp_processor_id(event->cpu));
if (rc) {
- mutex_unlock(&ref->lock);
+ spin_unlock(&ref->lock);
pr_err("core-imc: Unable to start the counters for core %d\n",
core_id);
return rc;
}
}
++ref->refc;
- mutex_unlock(&ref->lock);
+ spin_unlock(&ref->lock);

/*
* Since the system can run either in accumulation or trace-mode
@@ -867,7 +864,7 @@ static int core_imc_event_init(struct perf_event *event)
* to know whether any other trace/thread imc
* events are running.
*/
- mutex_lock(&imc_global_refc.lock);
+ spin_lock(&imc_global_refc.lock);
if (imc_global_refc.id == 0 || imc_global_refc.id == IMC_DOMAIN_CORE) {
/*
* No other trace/thread imc events are running in
@@ -876,10 +873,10 @@ static int core_imc_event_init(struct perf_event *event)
imc_global_refc.id = IMC_DOMAIN_CORE;
imc_global_refc.refc++;
} else {
- mutex_unlock(&imc_global_refc.lock);
+ spin_unlock(&imc_global_refc.lock);
return -EBUSY;
}
- mutex_unlock(&imc_global_refc.lock);
+ spin_unlock(&imc_global_refc.lock);

event->hw.event_base = (u64)pcmi->vbase + (config & IMC_EVENT_OFFSET_MASK);
event->destroy = core_imc_counters_release;
@@ -951,10 +948,10 @@ static int ppc_thread_imc_cpu_offline(unsigned int cpu)
mtspr(SPRN_LDBAR, (mfspr(SPRN_LDBAR) & (~(1UL << 63))));

/* Reduce the refc if thread-imc event running on this cpu */
- mutex_lock(&imc_global_refc.lock);
+ spin_lock(&imc_global_refc.lock);
if (imc_global_refc.id == IMC_DOMAIN_THREAD)
imc_global_refc.refc--;
- mutex_unlock(&imc_global_refc.lock);
+ spin_unlock(&imc_global_refc.lock);

return 0;
}
@@ -994,7 +991,7 @@ static int thread_imc_event_init(struct perf_event *event)
if (!target)
return -EINVAL;

- mutex_lock(&imc_global_refc.lock);
+ spin_lock(&imc_global_refc.lock);
/*
* Check if any other trace/core imc events are running in the
* system, if not set the global id to thread-imc.
@@ -1003,10 +1000,10 @@ static int thread_imc_event_init(struct perf_event *event)
imc_global_refc.id = IMC_DOMAIN_THREAD;
imc_global_refc.refc++;
} else {
- mutex_unlock(&imc_global_refc.lock);
+ spin_unlock(&imc_global_refc.lock);
return -EBUSY;
}
- mutex_unlock(&imc_global_refc.lock);
+ spin_unlock(&imc_global_refc.lock);

event->pmu->task_ctx_nr = perf_sw_context;
event->destroy = reset_global_refc;
@@ -1128,25 +1125,25 @@ static int thread_imc_event_add(struct perf_event *event, int flags)
/*
* imc pmus are enabled only when it is used.
* See if this is triggered for the first time.
- * If yes, take the mutex lock and enable the counters.
+ * If yes, take the lock and enable the counters.
* If not, just increment the count in ref count struct.
*/
ref = &core_imc_refc[core_id];
if (!ref)
return -EINVAL;

- mutex_lock(&ref->lock);
+ spin_lock(&ref->lock);
if (ref->refc == 0) {
if (opal_imc_counters_start(OPAL_IMC_COUNTERS_CORE,
get_hard_smp_processor_id(smp_processor_id()))) {
- mutex_unlock(&ref->lock);
+ spin_unlock(&ref->lock);
pr_err("thread-imc: Unable to start the counter\
for core %d\n", core_id);
return -EINVAL;
}
}
++ref->refc;
- mutex_unlock(&ref->lock);
+ spin_unlock(&ref->lock);
return 0;
}

@@ -1163,12 +1160,12 @@ static void thread_imc_event_del(struct perf_event *event, int flags)
return;
}

- mutex_lock(&ref->lock);
+ spin_lock(&ref->lock);
ref->refc--;
if (ref->refc == 0) {
if (opal_imc_counters_stop(OPAL_IMC_COUNTERS_CORE,
get_hard_smp_processor_id(smp_processor_id()))) {
- mutex_unlock(&ref->lock);
+ spin_unlock(&ref->lock);
pr_err("thread-imc: Unable to stop the counters\
for core %d\n", core_id);
return;
@@ -1176,7 +1173,7 @@ static void thread_imc_event_del(struct perf_event *event, int flags)
} else if (ref->refc < 0) {
ref->refc = 0;
}
- mutex_unlock(&ref->lock);
+ spin_unlock(&ref->lock);

/* Set bit 0 of LDBAR to zero, to stop posting updates to memory */
mtspr(SPRN_LDBAR, (mfspr(SPRN_LDBAR) & (~(1UL << 63))));
@@ -1217,9 +1214,8 @@ static int trace_imc_mem_alloc(int cpu_id, int size)
}
}

- /* Init the mutex, if not already */
trace_imc_refc[core_id].id = core_id;
- mutex_init(&trace_imc_refc[core_id].lock);
+ spin_lock_init(&trace_imc_refc[core_id].lock);

mtspr(SPRN_LDBAR, 0);
return 0;
@@ -1239,10 +1235,10 @@ static int ppc_trace_imc_cpu_offline(unsigned int cpu)
* Reduce the refc if any trace-imc event running
* on this cpu.
*/
- mutex_lock(&imc_global_refc.lock);
+ spin_lock(&imc_global_refc.lock);
if (imc_global_refc.id == IMC_DOMAIN_TRACE)
imc_global_refc.refc--;
- mutex_unlock(&imc_global_refc.lock);
+ spin_unlock(&imc_global_refc.lock);

return 0;
}
@@ -1364,17 +1360,17 @@ static int trace_imc_event_add(struct perf_event *event, int flags)
}

mtspr(SPRN_LDBAR, ldbar_value);
- mutex_lock(&ref->lock);
+ spin_lock(&ref->lock);
if (ref->refc == 0) {
if (opal_imc_counters_start(OPAL_IMC_COUNTERS_TRACE,
get_hard_smp_processor_id(smp_processor_id()))) {
- mutex_unlock(&ref->lock);
+ spin_unlock(&ref->lock);
pr_err("trace-imc: Unable to start the counters for core %d\n", core_id);
return -EINVAL;
}
}
++ref->refc;
- mutex_unlock(&ref->lock);
+ spin_unlock(&ref->lock);
return 0;
}

@@ -1407,19 +1403,19 @@ static void trace_imc_event_del(struct perf_event *event, int flags)
return;
}

- mutex_lock(&ref->lock);
+ spin_lock(&ref->lock);
ref->refc--;
if (ref->refc == 0) {
if (opal_imc_counters_stop(OPAL_IMC_COUNTERS_TRACE,
get_hard_smp_processor_id(smp_processor_id()))) {
- mutex_unlock(&ref->lock);
+ spin_unlock(&ref->lock);
pr_err("trace-imc: Unable to stop the counters for core %d\n", core_id);
return;
}
} else if (ref->refc < 0) {
ref->refc = 0;
}
- mutex_unlock(&ref->lock);
+ spin_unlock(&ref->lock);

trace_imc_event_stop(event, flags);
}
@@ -1441,7 +1437,7 @@ static int trace_imc_event_init(struct perf_event *event)
* no other thread is running any core/thread imc
* events
*/
- mutex_lock(&imc_global_refc.lock);
+ spin_lock(&imc_global_refc.lock);
if (imc_global_refc.id == 0 || imc_global_refc.id == IMC_DOMAIN_TRACE) {
/*
* No core/thread imc events are running in the
@@ -1450,10 +1446,10 @@ static int trace_imc_event_init(struct perf_event *event)
imc_global_refc.id = IMC_DOMAIN_TRACE;
imc_global_refc.refc++;
} else {
- mutex_unlock(&imc_global_refc.lock);
+ spin_unlock(&imc_global_refc.lock);
return -EBUSY;
}
- mutex_unlock(&imc_global_refc.lock);
+ spin_unlock(&imc_global_refc.lock);

event->hw.idx = -1;

@@ -1526,10 +1522,10 @@ static int init_nest_pmu_ref(void)
i = 0;
for_each_node(nid) {
/*
- * Mutex lock to avoid races while tracking the number of
+ * Take the lock to avoid races while tracking the number of
* sessions using the chip's nest pmu units.
*/
- mutex_init(&nest_imc_refc[i].lock);
+ spin_lock_init(&nest_imc_refc[i].lock);

/*
* Loop to init the "id" with the node_id. Variable "i" initialized to
@@ -1626,7 +1622,7 @@ static void imc_common_mem_free(struct imc_pmu *pmu_ptr)
static void imc_common_cpuhp_mem_free(struct imc_pmu *pmu_ptr)
{
if (pmu_ptr->domain == IMC_DOMAIN_NEST) {
- mutex_lock(&nest_init_lock);
+ spin_lock(&nest_init_lock);
if (nest_pmus == 1) {
cpuhp_remove_state(CPUHP_AP_PERF_POWERPC_NEST_IMC_ONLINE);
kfree(nest_imc_refc);
@@ -1636,7 +1632,7 @@ static void imc_common_cpuhp_mem_free(struct imc_pmu *pmu_ptr)

if (nest_pmus > 0)
nest_pmus--;
- mutex_unlock(&nest_init_lock);
+ spin_unlock(&nest_init_lock);
}

/* Free core_imc memory */
@@ -1793,11 +1789,11 @@ int init_imc_pmu(struct device_node *parent, struct imc_pmu *pmu_ptr, int pmu_id
* rest. To handle the cpuhotplug callback unregister, we track
* the number of nest pmus in "nest_pmus".
*/
- mutex_lock(&nest_init_lock);
+ spin_lock(&nest_init_lock);
if (nest_pmus == 0) {
ret = init_nest_pmu_ref();
if (ret) {
- mutex_unlock(&nest_init_lock);
+ spin_unlock(&nest_init_lock);
kfree(per_nest_pmu_arr);
per_nest_pmu_arr = NULL;
goto err_free_mem;
@@ -1805,7 +1801,7 @@ int init_imc_pmu(struct device_node *parent, struct imc_pmu *pmu_ptr, int pmu_id
/* Register for cpu hotplug notification. */
ret = nest_pmu_cpumask_init();
if (ret) {
- mutex_unlock(&nest_init_lock);
+ spin_unlock(&nest_init_lock);
kfree(nest_imc_refc);
kfree(per_nest_pmu_arr);
per_nest_pmu_arr = NULL;
@@ -1813,7 +1809,7 @@ int init_imc_pmu(struct device_node *parent, struct imc_pmu *pmu_ptr, int pmu_id
}
}
nest_pmus++;
- mutex_unlock(&nest_init_lock);
+ spin_unlock(&nest_init_lock);
break;
case IMC_DOMAIN_CORE:
ret = core_imc_pmu_cpumask_init();
diff --git a/arch/s390/include/asm/cpu_mf.h b/arch/s390/include/asm/cpu_mf.h
index 0d90cbeb89b4..a0914bc6c9bd 100644
--- a/arch/s390/include/asm/cpu_mf.h
+++ b/arch/s390/include/asm/cpu_mf.h
@@ -128,19 +128,21 @@ struct hws_combined_entry {
struct hws_diag_entry diag; /* Diagnostic-sampling data entry */
} __packed;

-struct hws_trailer_entry {
- union {
- struct {
- unsigned int f:1; /* 0 - Block Full Indicator */
- unsigned int a:1; /* 1 - Alert request control */
- unsigned int t:1; /* 2 - Timestamp format */
- unsigned int :29; /* 3 - 31: Reserved */
- unsigned int bsdes:16; /* 32-47: size of basic SDE */
- unsigned int dsdes:16; /* 48-63: size of diagnostic SDE */
- };
- unsigned long long flags; /* 0 - 63: All indicators */
+union hws_trailer_header {
+ struct {
+ unsigned int f:1; /* 0 - Block Full Indicator */
+ unsigned int a:1; /* 1 - Alert request control */
+ unsigned int t:1; /* 2 - Timestamp format */
+ unsigned int :29; /* 3 - 31: Reserved */
+ unsigned int bsdes:16; /* 32-47: size of basic SDE */
+ unsigned int dsdes:16; /* 48-63: size of diagnostic SDE */
+ unsigned long long overflow; /* 64 - Overflow Count */
};
- unsigned long long overflow; /* 64 - sample Overflow count */
+ __uint128_t val;
+};
+
+struct hws_trailer_entry {
+ union hws_trailer_header header; /* 0 - 15 Flags + Overflow Count */
unsigned char timestamp[16]; /* 16 - 31 timestamp */
unsigned long long reserved1; /* 32 -Reserved */
unsigned long long reserved2; /* */
@@ -287,14 +289,11 @@ static inline unsigned long sample_rate_to_freq(struct hws_qsi_info_block *qsi,
return USEC_PER_SEC * qsi->cpu_speed / rate;
}

-#define SDB_TE_ALERT_REQ_MASK 0x4000000000000000UL
-#define SDB_TE_BUFFER_FULL_MASK 0x8000000000000000UL
-
/* Return TOD timestamp contained in an trailer entry */
static inline unsigned long long trailer_timestamp(struct hws_trailer_entry *te)
{
/* TOD in STCKE format */
- if (te->t)
+ if (te->header.t)
return *((unsigned long long *) &te->timestamp[1]);

/* TOD in STCK format */
diff --git a/arch/s390/include/asm/percpu.h b/arch/s390/include/asm/percpu.h
index cb5fc0690435..081837b391e3 100644
--- a/arch/s390/include/asm/percpu.h
+++ b/arch/s390/include/asm/percpu.h
@@ -31,7 +31,7 @@
pcp_op_T__ *ptr__; \
preempt_disable_notrace(); \
ptr__ = raw_cpu_ptr(&(pcp)); \
- prev__ = *ptr__; \
+ prev__ = READ_ONCE(*ptr__); \
do { \
old__ = prev__; \
new__ = old__ op (val); \
diff --git a/arch/s390/kernel/machine_kexec_file.c b/arch/s390/kernel/machine_kexec_file.c
index 3459362c54ac..c7fd81851289 100644
--- a/arch/s390/kernel/machine_kexec_file.c
+++ b/arch/s390/kernel/machine_kexec_file.c
@@ -185,8 +185,6 @@ static int kexec_file_add_ipl_report(struct kimage *image,

data->memsz = ALIGN(data->memsz, PAGE_SIZE);
buf.mem = data->memsz;
- if (image->type == KEXEC_TYPE_CRASH)
- buf.mem += crashk_res.start;

ptr = (void *)ipl_cert_list_addr;
end = ptr + ipl_cert_list_size;
@@ -223,6 +221,9 @@ static int kexec_file_add_ipl_report(struct kimage *image,
data->kernel_buf + offsetof(struct lowcore, ipl_parmblock_ptr);
*lc_ipl_parmblock_ptr = (__u32)buf.mem;

+ if (image->type == KEXEC_TYPE_CRASH)
+ buf.mem += crashk_res.start;
+
ret = kexec_add_buffer(&buf);
out:
return ret;
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index db62def4ef28..4e6fadaeaa1a 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -163,14 +163,15 @@ static void free_sampling_buffer(struct sf_buffer *sfb)

static int alloc_sample_data_block(unsigned long *sdbt, gfp_t gfp_flags)
{
- unsigned long sdb, *trailer;
+ struct hws_trailer_entry *te;
+ unsigned long sdb;

/* Allocate and initialize sample-data-block */
sdb = get_zeroed_page(gfp_flags);
if (!sdb)
return -ENOMEM;
- trailer = trailer_entry_ptr(sdb);
- *trailer = SDB_TE_ALERT_REQ_MASK;
+ te = (struct hws_trailer_entry *)trailer_entry_ptr(sdb);
+ te->header.a = 1;

/* Link SDB into the sample-data-block-table */
*sdbt = sdb;
@@ -1206,7 +1207,7 @@ static void hw_collect_samples(struct perf_event *event, unsigned long *sdbt,
"%s: Found unknown"
" sampling data entry: te->f %i"
" basic.def %#4x (%p)\n", __func__,
- te->f, sample->def, sample);
+ te->header.f, sample->def, sample);
/* Sample slot is not yet written or other record.
*
* This condition can occur if the buffer was reused
@@ -1217,7 +1218,7 @@ static void hw_collect_samples(struct perf_event *event, unsigned long *sdbt,
* that are not full. Stop processing if the first
* invalid format was detected.
*/
- if (!te->f)
+ if (!te->header.f)
break;
}

@@ -1227,6 +1228,16 @@ static void hw_collect_samples(struct perf_event *event, unsigned long *sdbt,
}
}

+static inline __uint128_t __cdsg(__uint128_t *ptr, __uint128_t old, __uint128_t new)
+{
+ asm volatile(
+ " cdsg %[old],%[new],%[ptr]\n"
+ : [old] "+d" (old), [ptr] "+QS" (*ptr)
+ : [new] "d" (new)
+ : "memory", "cc");
+ return old;
+}
+
/* hw_perf_event_update() - Process sampling buffer
* @event: The perf event
* @flush_all: Flag to also flush partially filled sample-data-blocks
@@ -1243,10 +1254,11 @@ static void hw_collect_samples(struct perf_event *event, unsigned long *sdbt,
*/
static void hw_perf_event_update(struct perf_event *event, int flush_all)
{
+ unsigned long long event_overflow, sampl_overflow, num_sdb;
+ union hws_trailer_header old, prev, new;
struct hw_perf_event *hwc = &event->hw;
struct hws_trailer_entry *te;
unsigned long *sdbt;
- unsigned long long event_overflow, sampl_overflow, num_sdb, te_flags;
int done;

/*
@@ -1266,25 +1278,25 @@ static void hw_perf_event_update(struct perf_event *event, int flush_all)
te = (struct hws_trailer_entry *) trailer_entry_ptr(*sdbt);

/* Leave loop if no more work to do (block full indicator) */
- if (!te->f) {
+ if (!te->header.f) {
done = 1;
if (!flush_all)
break;
}

/* Check the sample overflow count */
- if (te->overflow)
+ if (te->header.overflow)
/* Account sample overflows and, if a particular limit
* is reached, extend the sampling buffer.
* For details, see sfb_account_overflows().
*/
- sampl_overflow += te->overflow;
+ sampl_overflow += te->header.overflow;

/* Timestamps are valid for full sample-data-blocks only */
debug_sprintf_event(sfdbg, 6, "%s: sdbt %#lx "
"overflow %llu timestamp %#llx\n",
- __func__, (unsigned long)sdbt, te->overflow,
- (te->f) ? trailer_timestamp(te) : 0ULL);
+ __func__, (unsigned long)sdbt, te->header.overflow,
+ (te->header.f) ? trailer_timestamp(te) : 0ULL);

/* Collect all samples from a single sample-data-block and
* flag if an (perf) event overflow happened. If so, the PMU
@@ -1294,12 +1306,16 @@ static void hw_perf_event_update(struct perf_event *event, int flush_all)
num_sdb++;

/* Reset trailer (using compare-double-and-swap) */
+ /* READ_ONCE() 16 byte header */
+ prev.val = __cdsg(&te->header.val, 0, 0);
do {
- te_flags = te->flags & ~SDB_TE_BUFFER_FULL_MASK;
- te_flags |= SDB_TE_ALERT_REQ_MASK;
- } while (!cmpxchg_double(&te->flags, &te->overflow,
- te->flags, te->overflow,
- te_flags, 0ULL));
+ old.val = prev.val;
+ new.val = prev.val;
+ new.f = 0;
+ new.a = 1;
+ new.overflow = 0;
+ prev.val = __cdsg(&te->header.val, old.val, new.val);
+ } while (prev.val != old.val);

/* Advance to next sample-data-block */
sdbt++;
@@ -1384,7 +1400,7 @@ static void aux_output_end(struct perf_output_handle *handle)
range_scan = AUX_SDB_NUM_ALERT(aux);
for (i = 0, idx = aux->head; i < range_scan; i++, idx++) {
te = aux_sdb_trailer(aux, idx);
- if (!(te->flags & SDB_TE_BUFFER_FULL_MASK))
+ if (!te->header.f)
break;
}
/* i is num of SDBs which are full */
@@ -1392,7 +1408,7 @@ static void aux_output_end(struct perf_output_handle *handle)

/* Remove alert indicators in the buffer */
te = aux_sdb_trailer(aux, aux->alert_mark);
- te->flags &= ~SDB_TE_ALERT_REQ_MASK;
+ te->header.a = 0;

debug_sprintf_event(sfdbg, 6, "%s: SDBs %ld range %ld head %ld\n",
__func__, i, range_scan, aux->head);
@@ -1437,9 +1453,9 @@ static int aux_output_begin(struct perf_output_handle *handle,
idx = aux->empty_mark + 1;
for (i = 0; i < range_scan; i++, idx++) {
te = aux_sdb_trailer(aux, idx);
- te->flags &= ~(SDB_TE_BUFFER_FULL_MASK |
- SDB_TE_ALERT_REQ_MASK);
- te->overflow = 0;
+ te->header.f = 0;
+ te->header.a = 0;
+ te->header.overflow = 0;
}
/* Save the position of empty SDBs */
aux->empty_mark = aux->head + range - 1;
@@ -1448,7 +1464,7 @@ static int aux_output_begin(struct perf_output_handle *handle,
/* Set alert indicator */
aux->alert_mark = aux->head + range/2 - 1;
te = aux_sdb_trailer(aux, aux->alert_mark);
- te->flags = te->flags | SDB_TE_ALERT_REQ_MASK;
+ te->header.a = 1;

/* Reset hardware buffer head */
head = AUX_SDB_INDEX(aux, aux->head);
@@ -1475,14 +1491,17 @@ static int aux_output_begin(struct perf_output_handle *handle,
static bool aux_set_alert(struct aux_buffer *aux, unsigned long alert_index,
unsigned long long *overflow)
{
- unsigned long long orig_overflow, orig_flags, new_flags;
+ union hws_trailer_header old, prev, new;
struct hws_trailer_entry *te;

te = aux_sdb_trailer(aux, alert_index);
+ /* READ_ONCE() 16 byte header */
+ prev.val = __cdsg(&te->header.val, 0, 0);
do {
- orig_flags = te->flags;
- *overflow = orig_overflow = te->overflow;
- if (orig_flags & SDB_TE_BUFFER_FULL_MASK) {
+ old.val = prev.val;
+ new.val = prev.val;
+ *overflow = old.overflow;
+ if (old.f) {
/*
* SDB is already set by hardware.
* Abort and try to set somewhere
@@ -1490,10 +1509,10 @@ static bool aux_set_alert(struct aux_buffer *aux, unsigned long alert_index,
*/
return false;
}
- new_flags = orig_flags | SDB_TE_ALERT_REQ_MASK;
- } while (!cmpxchg_double(&te->flags, &te->overflow,
- orig_flags, orig_overflow,
- new_flags, 0ULL));
+ new.a = 1;
+ new.overflow = 0;
+ prev.val = __cdsg(&te->header.val, old.val, new.val);
+ } while (prev.val != old.val);
return true;
}

@@ -1522,8 +1541,9 @@ static bool aux_set_alert(struct aux_buffer *aux, unsigned long alert_index,
static bool aux_reset_buffer(struct aux_buffer *aux, unsigned long range,
unsigned long long *overflow)
{
- unsigned long long orig_overflow, orig_flags, new_flags;
unsigned long i, range_scan, idx, idx_old;
+ union hws_trailer_header old, prev, new;
+ unsigned long long orig_overflow;
struct hws_trailer_entry *te;

debug_sprintf_event(sfdbg, 6, "%s: range %ld head %ld alert %ld "
@@ -1554,17 +1574,20 @@ static bool aux_reset_buffer(struct aux_buffer *aux, unsigned long range,
idx_old = idx = aux->empty_mark + 1;
for (i = 0; i < range_scan; i++, idx++) {
te = aux_sdb_trailer(aux, idx);
+ /* READ_ONCE() 16 byte header */
+ prev.val = __cdsg(&te->header.val, 0, 0);
do {
- orig_flags = te->flags;
- orig_overflow = te->overflow;
- new_flags = orig_flags & ~SDB_TE_BUFFER_FULL_MASK;
+ old.val = prev.val;
+ new.val = prev.val;
+ orig_overflow = old.overflow;
+ new.f = 0;
+ new.overflow = 0;
if (idx == aux->alert_mark)
- new_flags |= SDB_TE_ALERT_REQ_MASK;
+ new.a = 1;
else
- new_flags &= ~SDB_TE_ALERT_REQ_MASK;
- } while (!cmpxchg_double(&te->flags, &te->overflow,
- orig_flags, orig_overflow,
- new_flags, 0ULL));
+ new.a = 0;
+ prev.val = __cdsg(&te->header.val, old.val, new.val);
+ } while (prev.val != old.val);
*overflow += orig_overflow;
}

diff --git a/arch/x86/boot/bioscall.S b/arch/x86/boot/bioscall.S
index 5521ea12f44e..aa9b96457584 100644
--- a/arch/x86/boot/bioscall.S
+++ b/arch/x86/boot/bioscall.S
@@ -32,7 +32,7 @@ intcall:
movw %dx, %si
movw %sp, %di
movw $11, %cx
- rep; movsd
+ rep; movsl

/* Pop full state from the stack */
popal
@@ -67,7 +67,7 @@ intcall:
jz 4f
movw %sp, %si
movw $11, %cx
- rep; movsd
+ rep; movsl
4: addw $44, %sp

/* Restore state and return */
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index b57b3db9a6a7..4f5d79e658cd 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -580,8 +580,10 @@ static int __rdtgroup_move_task(struct task_struct *tsk,
/*
* Ensure the task's closid and rmid are written before determining if
* the task is current that will decide if it will be interrupted.
+ * This pairs with the full barrier between the rq->curr update and
+ * resctrl_sched_in() during context switch.
*/
- barrier();
+ smp_mb();

/*
* By now, the task's closid and rmid are set. If the task is current
@@ -2363,6 +2365,14 @@ static void rdt_move_group_tasks(struct rdtgroup *from, struct rdtgroup *to,
WRITE_ONCE(t->closid, to->closid);
WRITE_ONCE(t->rmid, to->mon.rmid);

+ /*
+ * Order the closid/rmid stores above before the loads
+ * in task_curr(). This pairs with the full barrier
+ * between the rq->curr update and resctrl_sched_in()
+ * during context switch.
+ */
+ smp_mb();
+
/*
* If the task is on a CPU, set the CPU in the mask.
* The detection is inaccurate as tasks might move or
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
index 05b27b4a54c9..528437e3e2f3 100644
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -567,16 +567,22 @@ struct kvm_cpuid_array {
int nent;
};

+static struct kvm_cpuid_entry2 *get_next_cpuid(struct kvm_cpuid_array *array)
+{
+ if (array->nent >= array->maxnent)
+ return NULL;
+
+ return &array->entries[array->nent++];
+}
+
static struct kvm_cpuid_entry2 *do_host_cpuid(struct kvm_cpuid_array *array,
u32 function, u32 index)
{
- struct kvm_cpuid_entry2 *entry;
+ struct kvm_cpuid_entry2 *entry = get_next_cpuid(array);

- if (array->nent >= array->maxnent)
+ if (!entry)
return NULL;

- entry = &array->entries[array->nent++];
-
entry->function = function;
entry->index = index;
entry->flags = 0;
@@ -755,22 +761,13 @@ static inline int __do_cpuid_func(struct kvm_cpuid_array *array, u32 function)
entry->edx = edx.full;
break;
}
- /*
- * Per Intel's SDM, the 0x1f is a superset of 0xb,
- * thus they can be handled by common code.
- */
case 0x1f:
case 0xb:
/*
- * Populate entries until the level type (ECX[15:8]) of the
- * previous entry is zero. Note, CPUID EAX.{0x1f,0xb}.0 is
- * the starting entry, filled by the primary do_host_cpuid().
+ * No topology; a valid topology is indicated by the presence
+ * of subleaf 1.
*/
- for (i = 1; entry->ecx & 0xff00; ++i) {
- entry = do_host_cpuid(array, function, i);
- if (!entry)
- goto out;
- }
+ entry->eax = entry->ebx = entry->ecx = 0;
break;
case 0xd:
entry->eax &= supported_xcr0;
@@ -962,6 +959,9 @@ static inline int __do_cpuid_func(struct kvm_cpuid_array *array, u32 function)
entry->ebx = entry->ecx = entry->edx = 0;
break;
case 0x8000001e:
+ /* Do not return host topology information. */
+ entry->eax = entry->ebx = entry->ecx = 0;
+ entry->edx = 0; /* reserved */
break;
case 0x8000001F:
if (!kvm_cpu_cap_has(X86_FEATURE_SEV)) {
diff --git a/block/blk-merge.c b/block/blk-merge.c
index bb26db93ad1d..d1435b657297 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -348,11 +348,13 @@ void __blk_queue_split(struct bio **bio, unsigned int *nr_segs)
break;
}
split = blk_bio_segment_split(q, *bio, &q->bio_split, nr_segs);
+ if (IS_ERR(split))
+ *bio = split = NULL;
break;
}

if (split) {
- /* there isn't chance to merge the splitted bio */
+ /* there isn't chance to merge the split bio */
split->bi_opf |= REQ_NOMERGE;

bio_chain(split, *bio);
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 1a28ba9017ed..9f53b4caf977 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -2193,6 +2193,8 @@ blk_qc_t blk_mq_submit_bio(struct bio *bio)

blk_queue_bounce(q, &bio);
__blk_queue_split(&bio, &nr_segs);
+ if (!bio)
+ goto queue_exit;

if (!bio_integrity_prep(bio))
goto queue_exit;
diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c
index 47e0d105b462..4281dc847bc2 100644
--- a/drivers/block/drbd/drbd_req.c
+++ b/drivers/block/drbd/drbd_req.c
@@ -1602,6 +1602,8 @@ blk_qc_t drbd_submit_bio(struct bio *bio)
struct drbd_device *device = bio->bi_bdev->bd_disk->private_data;

blk_queue_split(&bio);
+ if (!bio)
+ return BLK_QC_T_NONE;

/*
* what we "blindly" assume:
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 0f26b2510a75..ca2ab977ef8e 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -2407,6 +2407,8 @@ static blk_qc_t pkt_submit_bio(struct bio *bio)
struct bio *split;

blk_queue_split(&bio);
+ if (!bio)
+ return BLK_QC_T_NONE;

pd = bio->bi_bdev->bd_disk->queue->queuedata;
if (!pd) {
diff --git a/drivers/block/ps3vram.c b/drivers/block/ps3vram.c
index c7b19e128b03..c79aa4d8ccf7 100644
--- a/drivers/block/ps3vram.c
+++ b/drivers/block/ps3vram.c
@@ -587,6 +587,8 @@ static blk_qc_t ps3vram_submit_bio(struct bio *bio)
dev_dbg(&dev->core, "%s\n", __func__);

blk_queue_split(&bio);
+ if (!bio)
+ return BLK_QC_T_NONE;

spin_lock_irq(&priv->lock);
busy = !bio_list_empty(&priv->list);
diff --git a/drivers/block/rsxx/dev.c b/drivers/block/rsxx/dev.c
index 1cc40b0ea761..6b253d99bc48 100644
--- a/drivers/block/rsxx/dev.c
+++ b/drivers/block/rsxx/dev.c
@@ -127,6 +127,8 @@ static blk_qc_t rsxx_submit_bio(struct bio *bio)
blk_status_t st = BLK_STS_IOERR;

blk_queue_split(&bio);
+ if (!bio)
+ return BLK_QC_T_NONE;

might_sleep();

diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index 1020268a075a..1a87b9c6c2f8 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -297,7 +297,8 @@ int mhi_pm_m0_transition(struct mhi_controller *mhi_cntrl)
read_lock_irq(&mhi_chan->lock);

/* Only ring DB if ring is not empty */
- if (tre_ring->base && tre_ring->wp != tre_ring->rp)
+ if (tre_ring->base && tre_ring->wp != tre_ring->rp &&
+ mhi_chan->ch_state == MHI_CH_STATE_ENABLED)
mhi_ring_chan_db(mhi_cntrl, mhi_chan);
read_unlock_irq(&mhi_chan->lock);
}
diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
index 8c4d947fb848..8220ce5b87ca 100644
--- a/drivers/edac/edac_device.c
+++ b/drivers/edac/edac_device.c
@@ -424,17 +424,16 @@ static void edac_device_workq_teardown(struct edac_device_ctl_info *edac_dev)
* Then restart the workq on the new delay
*/
void edac_device_reset_delay_period(struct edac_device_ctl_info *edac_dev,
- unsigned long value)
+ unsigned long msec)
{
- unsigned long jiffs = msecs_to_jiffies(value);
-
- if (value == 1000)
- jiffs = round_jiffies_relative(value);
-
- edac_dev->poll_msec = value;
- edac_dev->delay = jiffs;
+ edac_dev->poll_msec = msec;
+ edac_dev->delay = msecs_to_jiffies(msec);

- edac_mod_work(&edac_dev->work, jiffs);
+ /* See comment in edac_device_workq_setup() above */
+ if (edac_dev->poll_msec == 1000)
+ edac_mod_work(&edac_dev->work, round_jiffies_relative(edac_dev->delay));
+ else
+ edac_mod_work(&edac_dev->work, edac_dev->delay);
}

int edac_device_alloc_index(void)
diff --git a/drivers/edac/edac_module.h b/drivers/edac/edac_module.h
index aa1f91688eb8..841d238bc3f1 100644
--- a/drivers/edac/edac_module.h
+++ b/drivers/edac/edac_module.h
@@ -56,7 +56,7 @@ bool edac_stop_work(struct delayed_work *work);
bool edac_mod_work(struct delayed_work *work, unsigned long delay);

extern void edac_device_reset_delay_period(struct edac_device_ctl_info
- *edac_dev, unsigned long value);
+ *edac_dev, unsigned long msec);
extern void edac_mc_reset_delay_period(unsigned long value);

extern void *edac_align_ptr(void **p, unsigned size, int n_elems);
diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
index ba03f5a4b30c..a2765d668856 100644
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -385,8 +385,8 @@ static int __init efisubsys_init(void)
efi_kobj = kobject_create_and_add("efi", firmware_kobj);
if (!efi_kobj) {
pr_err("efi: Firmware registration failed.\n");
- destroy_workqueue(efi_rts_wq);
- return -ENOMEM;
+ error = -ENOMEM;
+ goto err_destroy_wq;
}

if (efi_rt_services_supported(EFI_RT_SUPPORTED_GET_VARIABLE |
@@ -429,7 +429,10 @@ static int __init efisubsys_init(void)
generic_ops_unregister();
err_put:
kobject_put(efi_kobj);
- destroy_workqueue(efi_rts_wq);
+err_destroy_wq:
+ if (efi_rts_wq)
+ destroy_workqueue(efi_rts_wq);
+
return error;
}

diff --git a/drivers/gpu/drm/i915/gt/intel_reset.c b/drivers/gpu/drm/i915/gt/intel_reset.c
index 18b0e57c58c1..9dc244b70ce4 100644
--- a/drivers/gpu/drm/i915/gt/intel_reset.c
+++ b/drivers/gpu/drm/i915/gt/intel_reset.c
@@ -271,6 +271,7 @@ static int ilk_do_reset(struct intel_gt *gt, intel_engine_mask_t engine_mask,
static int gen6_hw_domain_reset(struct intel_gt *gt, u32 hw_domain_mask)
{
struct intel_uncore *uncore = gt->uncore;
+ int loops = 2;
int err;

/*
@@ -278,18 +279,39 @@ static int gen6_hw_domain_reset(struct intel_gt *gt, u32 hw_domain_mask)
* for fifo space for the write or forcewake the chip for
* the read
*/
- intel_uncore_write_fw(uncore, GEN6_GDRST, hw_domain_mask);
+ do {
+ intel_uncore_write_fw(uncore, GEN6_GDRST, hw_domain_mask);

- /* Wait for the device to ack the reset requests */
- err = __intel_wait_for_register_fw(uncore,
- GEN6_GDRST, hw_domain_mask, 0,
- 500, 0,
- NULL);
+ /*
+ * Wait for the device to ack the reset requests.
+ *
+ * On some platforms, e.g. Jasperlake, we see that the
+ * engine register state is not cleared until shortly after
+ * GDRST reports completion, causing a failure as we try
+ * to immediately resume while the internal state is still
+ * in flux. If we immediately repeat the reset, the second
+ * reset appears to serialise with the first, and since
+ * it is a no-op, the registers should retain their reset
+ * value. However, there is still a concern that upon
+ * leaving the second reset, the internal engine state
+ * is still in flux and not ready for resuming.
+ */
+ err = __intel_wait_for_register_fw(uncore, GEN6_GDRST,
+ hw_domain_mask, 0,
+ 2000, 0,
+ NULL);
+ } while (err == 0 && --loops);
if (err)
GT_TRACE(gt,
"Wait for 0x%08x engines reset failed\n",
hw_domain_mask);

+ /*
+ * As we have observed that the engine state is still volatile
+ * after GDRST is acked, impose a small delay to let everything settle.
+ */
+ udelay(50);
+
return err;
}

diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.h b/drivers/gpu/drm/msm/adreno/adreno_gpu.h
index 225c277a6223..588722e824f6 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.h
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.h
@@ -29,11 +29,9 @@ enum {
ADRENO_FW_MAX,
};

-enum adreno_quirks {
- ADRENO_QUIRK_TWO_PASS_USE_WFI = 1,
- ADRENO_QUIRK_FAULT_DETECT_MASK = 2,
- ADRENO_QUIRK_LMLOADKILL_DISABLE = 3,
-};
+#define ADRENO_QUIRK_TWO_PASS_USE_WFI BIT(0)
+#define ADRENO_QUIRK_FAULT_DETECT_MASK BIT(1)
+#define ADRENO_QUIRK_LMLOADKILL_DISABLE BIT(2)

struct adreno_rev {
uint8_t core;
@@ -65,7 +63,7 @@ struct adreno_info {
const char *name;
const char *fw[ADRENO_FW_MAX];
uint32_t gmem;
- enum adreno_quirks quirks;
+ u64 quirks;
struct msm_gpu *(*init)(struct drm_device *dev);
const char *zapfw;
u32 inactive_period;
diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
index 6d36f63c3338..7b8d4ba868eb 100644
--- a/drivers/gpu/drm/msm/dp/dp_aux.c
+++ b/drivers/gpu/drm/msm/dp/dp_aux.c
@@ -406,6 +406,10 @@ void dp_aux_isr(struct drm_dp_aux *dp_aux)

isr = dp_catalog_aux_get_irq(aux->catalog);

+ /* no interrupts pending, return immediately */
+ if (!isr)
+ return;
+
if (!aux->cmd_busy)
return;

diff --git a/drivers/gpu/drm/virtio/virtgpu_ioctl.c b/drivers/gpu/drm/virtio/virtgpu_ioctl.c
index 15c3e63db396..3c750ba6ba1f 100644
--- a/drivers/gpu/drm/virtio/virtgpu_ioctl.c
+++ b/drivers/gpu/drm/virtio/virtgpu_ioctl.c
@@ -292,10 +292,18 @@ static int virtio_gpu_resource_create_ioctl(struct drm_device *dev, void *data,
drm_gem_object_release(obj);
return ret;
}
- drm_gem_object_put(obj);

rc->res_handle = qobj->hw_res_handle; /* similiar to a VM address */
rc->bo_handle = handle;
+
+ /*
+ * The handle owns the reference now. But we must drop our
+ * remaining reference *after* we no longer need to dereference
+ * the obj. Otherwise userspace could guess the handle and
+ * race closing it from another thread.
+ */
+ drm_gem_object_put(obj);
+
return 0;
}

@@ -656,11 +664,18 @@ static int virtio_gpu_resource_create_blob_ioctl(struct drm_device *dev,
drm_gem_object_release(obj);
return ret;
}
- drm_gem_object_put(obj);

rc_blob->res_handle = bo->hw_res_handle;
rc_blob->bo_handle = handle;

+ /*
+ * The handle owns the reference now. But we must drop our
+ * remaining reference *after* we no longer need to dereference
+ * the obj. Otherwise userspace could guess the handle and
+ * race closing it from another thread.
+ */
+ drm_gem_object_put(obj);
+
return 0;
}

diff --git a/drivers/iommu/iova.c b/drivers/iommu/iova.c
index cae5a73ff518..0835f32e040a 100644
--- a/drivers/iommu/iova.c
+++ b/drivers/iommu/iova.c
@@ -252,7 +252,7 @@ static int __alloc_and_insert_iova_range(struct iova_domain *iovad,

curr = __get_cached_rbnode(iovad, limit_pfn);
curr_iova = to_iova(curr);
- retry_pfn = curr_iova->pfn_hi + 1;
+ retry_pfn = curr_iova->pfn_hi;

retry:
do {
@@ -266,7 +266,7 @@ static int __alloc_and_insert_iova_range(struct iova_domain *iovad,
if (high_pfn < size || new_pfn < low_pfn) {
if (low_pfn == iovad->start_pfn && retry_pfn < limit_pfn) {
high_pfn = limit_pfn;
- low_pfn = retry_pfn;
+ low_pfn = retry_pfn + 1;
curr = iova_find_limit(iovad, limit_pfn);
curr_iova = to_iova(curr);
goto retry;
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 254530ad6c48..fe1c3123a7e7 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -655,7 +655,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
ret = iommu_device_sysfs_add(&data->iommu, &pdev->dev, NULL,
dev_name(&pdev->dev));
if (ret)
- return ret;
+ goto out_clk_unprepare;

ret = iommu_device_register(&data->iommu, &mtk_iommu_ops, dev);
if (ret)
@@ -678,6 +678,8 @@ static int mtk_iommu_probe(struct platform_device *pdev)
iommu_device_unregister(&data->iommu);
out_sysfs_remove:
iommu_device_sysfs_remove(&data->iommu);
+out_clk_unprepare:
+ clk_disable_unprepare(data->bclk);
return ret;
}

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 59ab99844df8..9e54b865f30d 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -458,6 +458,8 @@ static blk_qc_t md_submit_bio(struct bio *bio)
}

blk_queue_split(&bio);
+ if (!bio)
+ return BLK_QC_T_NONE;

if (mddev->ro == 1 && unlikely(rw == WRITE)) {
if (bio_sectors(bio) != 0)
diff --git a/drivers/net/ethernet/intel/igc/igc_defines.h b/drivers/net/ethernet/intel/igc/igc_defines.h
index f171bc99e58c..60d0ca69ceca 100644
--- a/drivers/net/ethernet/intel/igc/igc_defines.h
+++ b/drivers/net/ethernet/intel/igc/igc_defines.h
@@ -469,7 +469,9 @@
#define IGC_TSAUXC_EN_TT0 BIT(0) /* Enable target time 0. */
#define IGC_TSAUXC_EN_TT1 BIT(1) /* Enable target time 1. */
#define IGC_TSAUXC_EN_CLK0 BIT(2) /* Enable Configurable Frequency Clock 0. */
+#define IGC_TSAUXC_ST0 BIT(4) /* Start Clock 0 Toggle on Target Time 0. */
#define IGC_TSAUXC_EN_CLK1 BIT(5) /* Enable Configurable Frequency Clock 1. */
+#define IGC_TSAUXC_ST1 BIT(7) /* Start Clock 1 Toggle on Target Time 1. */
#define IGC_TSAUXC_EN_TS0 BIT(8) /* Enable hardware timestamp 0. */
#define IGC_TSAUXC_AUTT0 BIT(9) /* Auxiliary Timestamp Taken. */
#define IGC_TSAUXC_EN_TS1 BIT(10) /* Enable hardware timestamp 0. */
diff --git a/drivers/net/ethernet/intel/igc/igc_ptp.c b/drivers/net/ethernet/intel/igc/igc_ptp.c
index 8e521f99b80a..fbde7826927b 100644
--- a/drivers/net/ethernet/intel/igc/igc_ptp.c
+++ b/drivers/net/ethernet/intel/igc/igc_ptp.c
@@ -323,7 +323,7 @@ static int igc_ptp_feature_enable_i225(struct ptp_clock_info *ptp,
ts = ns_to_timespec64(ns);
if (rq->perout.index == 1) {
if (use_freq) {
- tsauxc_mask = IGC_TSAUXC_EN_CLK1;
+ tsauxc_mask = IGC_TSAUXC_EN_CLK1 | IGC_TSAUXC_ST1;
tsim_mask = 0;
} else {
tsauxc_mask = IGC_TSAUXC_EN_TT1;
@@ -334,7 +334,7 @@ static int igc_ptp_feature_enable_i225(struct ptp_clock_info *ptp,
freqout = IGC_FREQOUT1;
} else {
if (use_freq) {
- tsauxc_mask = IGC_TSAUXC_EN_CLK0;
+ tsauxc_mask = IGC_TSAUXC_EN_CLK0 | IGC_TSAUXC_ST0;
tsim_mask = 0;
} else {
tsauxc_mask = IGC_TSAUXC_EN_TT0;
@@ -348,10 +348,12 @@ static int igc_ptp_feature_enable_i225(struct ptp_clock_info *ptp,
tsauxc = rd32(IGC_TSAUXC);
tsim = rd32(IGC_TSIM);
if (rq->perout.index == 1) {
- tsauxc &= ~(IGC_TSAUXC_EN_TT1 | IGC_TSAUXC_EN_CLK1);
+ tsauxc &= ~(IGC_TSAUXC_EN_TT1 | IGC_TSAUXC_EN_CLK1 |
+ IGC_TSAUXC_ST1);
tsim &= ~IGC_TSICR_TT1;
} else {
- tsauxc &= ~(IGC_TSAUXC_EN_TT0 | IGC_TSAUXC_EN_CLK0);
+ tsauxc &= ~(IGC_TSAUXC_EN_TT0 | IGC_TSAUXC_EN_CLK0 |
+ IGC_TSAUXC_ST0);
tsim &= ~IGC_TSICR_TT0;
}
if (on) {
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
index 24aa97f993ca..123dca9ce468 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -855,9 +855,11 @@ static struct pci_dev *ixgbe_get_first_secondary_devfn(unsigned int devfn)
rp_pdev = pci_get_domain_bus_and_slot(0, 0, devfn);
if (rp_pdev && rp_pdev->subordinate) {
bus = rp_pdev->subordinate->number;
+ pci_dev_put(rp_pdev);
return pci_get_domain_bus_and_slot(0, bus, 0);
}

+ pci_dev_put(rp_pdev);
return NULL;
}

@@ -874,6 +876,7 @@ static bool ixgbe_x550em_a_has_mii(struct ixgbe_hw *hw)
struct ixgbe_adapter *adapter = hw->back;
struct pci_dev *pdev = adapter->pdev;
struct pci_dev *func0_pdev;
+ bool has_mii = false;

/* For the C3000 family of SoCs (x550em_a) the internal ixgbe devices
* are always downstream of root ports @ 0000:00:16.0 & 0000:00:17.0
@@ -884,15 +887,16 @@ static bool ixgbe_x550em_a_has_mii(struct ixgbe_hw *hw)
func0_pdev = ixgbe_get_first_secondary_devfn(PCI_DEVFN(0x16, 0));
if (func0_pdev) {
if (func0_pdev == pdev)
- return true;
- else
- return false;
+ has_mii = true;
+ goto out;
}
func0_pdev = ixgbe_get_first_secondary_devfn(PCI_DEVFN(0x17, 0));
if (func0_pdev == pdev)
- return true;
+ has_mii = true;

- return false;
+out:
+ pci_dev_put(func0_pdev);
+ return has_mii;
}

/**
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
index 6b335139abe7..fd0a31bf94fe 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
@@ -695,9 +695,9 @@ int cgx_lmac_rx_tx_enable(void *cgxd, int lmac_id, bool enable)

cfg = cgx_read(cgx, lmac_id, CGXX_CMRX_CFG);
if (enable)
- cfg |= CMR_EN | DATA_PKT_RX_EN | DATA_PKT_TX_EN;
+ cfg |= DATA_PKT_RX_EN | DATA_PKT_TX_EN;
else
- cfg &= ~(CMR_EN | DATA_PKT_RX_EN | DATA_PKT_TX_EN);
+ cfg &= ~(DATA_PKT_RX_EN | DATA_PKT_TX_EN);
cgx_write(cgx, lmac_id, CGXX_CMRX_CFG, cfg);
return 0;
}
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.h b/drivers/net/ethernet/marvell/octeontx2/af/cgx.h
index ab1e4abdea38..5714280a4252 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.h
@@ -30,7 +30,6 @@
#define CMR_P2X_SEL_SHIFT 59ULL
#define CMR_P2X_SEL_NIX0 1ULL
#define CMR_P2X_SEL_NIX1 2ULL
-#define CMR_EN BIT_ULL(55)
#define DATA_PKT_TX_EN BIT_ULL(53)
#define DATA_PKT_RX_EN BIT_ULL(54)
#define CGX_LMAC_TYPE_SHIFT 40
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_vxlan.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_vxlan.c
index 4267f3a1059e..78b1a6ddd967 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_vxlan.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_vxlan.c
@@ -88,6 +88,8 @@ static int mlx5e_gen_ip_tunnel_header_vxlan(char buf[],
struct udphdr *udp = (struct udphdr *)(buf);
struct vxlanhdr *vxh;

+ if (tun_key->tun_flags & TUNNEL_VXLAN_OPT)
+ return -EOPNOTSUPP;
vxh = (struct vxlanhdr *)((char *)udp + sizeof(struct udphdr));
*ip_proto = IPPROTO_UDP;

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
index 8f2f99689aba..9ea4281a55b8 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -3597,7 +3597,8 @@ static int parse_tc_nic_actions(struct mlx5e_priv *priv,
if (err)
return err;

- action |= MLX5_FLOW_CONTEXT_ACTION_COUNT;
+ action |= MLX5_FLOW_CONTEXT_ACTION_FWD_DEST |
+ MLX5_FLOW_CONTEXT_ACTION_COUNT;
attr->dest_chain = act->chain_index;
break;
case FLOW_ACTION_CT:
@@ -3632,12 +3633,9 @@ static int parse_tc_nic_actions(struct mlx5e_priv *priv,

attr->action = action;

- if (attr->dest_chain) {
- if (attr->action & MLX5_FLOW_CONTEXT_ACTION_FWD_DEST) {
- NL_SET_ERR_MSG(extack, "Mirroring goto chain rules isn't supported");
- return -EOPNOTSUPP;
- }
- attr->action |= MLX5_FLOW_CONTEXT_ACTION_FWD_DEST;
+ if (attr->dest_chain && parse_attr->mirred_ifindex[0]) {
+ NL_SET_ERR_MSG(extack, "Mirroring goto chain rules isn't supported");
+ return -EOPNOTSUPP;
}

if (attr->action & MLX5_FLOW_CONTEXT_ACTION_MOD_HDR)
@@ -4146,7 +4144,8 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv,
if (err)
return err;

- action |= MLX5_FLOW_CONTEXT_ACTION_COUNT;
+ action |= MLX5_FLOW_CONTEXT_ACTION_FWD_DEST |
+ MLX5_FLOW_CONTEXT_ACTION_COUNT;
attr->dest_chain = act->chain_index;
break;
case FLOW_ACTION_CT:
@@ -4218,24 +4217,18 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv,
if (!actions_match_supported(priv, flow_action, parse_attr, flow, extack))
return -EOPNOTSUPP;

- if (attr->dest_chain) {
- if (decap) {
- /* It can be supported if we'll create a mapping for
- * the tunnel device only (without tunnel), and set
- * this tunnel id with this decap flow.
- *
- * On restore (miss), we'll just set this saved tunnel
- * device.
- */
-
- NL_SET_ERR_MSG(extack,
- "Decap with goto isn't supported");
- netdev_warn(priv->netdev,
- "Decap with goto isn't supported");
- return -EOPNOTSUPP;
- }
+ if (attr->dest_chain && decap) {
+ /* It can be supported if we'll create a mapping for
+ * the tunnel device only (without tunnel), and set
+ * this tunnel id with this decap flow.
+ *
+ * On restore (miss), we'll just set this saved tunnel
+ * device.
+ */

- attr->action |= MLX5_FLOW_CONTEXT_ACTION_FWD_DEST;
+ NL_SET_ERR_MSG(extack, "Decap with goto isn't supported");
+ netdev_warn(priv->netdev, "Decap with goto isn't supported");
+ return -EOPNOTSUPP;
}

if (esw_attr->split_count > 0 && !mlx5_esw_has_fwd_fdb(priv->mdev)) {
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c
index 91e806c1aa21..8490c0cf80a8 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c
@@ -599,7 +599,7 @@ static int mlx5_ptp_verify(struct ptp_clock_info *ptp, unsigned int pin,
static const struct ptp_clock_info mlx5_ptp_clock_info = {
.owner = THIS_MODULE,
.name = "mlx5_ptp",
- .max_adj = 100000000,
+ .max_adj = 50000000,
.n_alarm = 0,
.n_ext_ts = 0,
.n_per_out = 0,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
index ac8bc1c8614d..487418ef9b4f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
@@ -229,7 +229,10 @@ static int stmmac_enable(struct ptp_clock_info *ptp,
}
writel(acr_value, ptpaddr + PTP_ACR);
mutex_unlock(&priv->aux_ts_lock);
- ret = 0;
+ /* wait for auxts fifo clear to finish */
+ ret = readl_poll_timeout(ptpaddr + PTP_ACR, acr_value,
+ !(acr_value & PTP_ACR_ATSFC),
+ 10, 10000);
break;

default:
diff --git a/drivers/nfc/pn533/usb.c b/drivers/nfc/pn533/usb.c
index bd7f7478d189..62ad26e4299d 100644
--- a/drivers/nfc/pn533/usb.c
+++ b/drivers/nfc/pn533/usb.c
@@ -153,10 +153,17 @@ static int pn533_usb_send_ack(struct pn533 *dev, gfp_t flags)
return usb_submit_urb(phy->ack_urb, flags);
}

+struct pn533_out_arg {
+ struct pn533_usb_phy *phy;
+ struct completion done;
+};
+
static int pn533_usb_send_frame(struct pn533 *dev,
struct sk_buff *out)
{
struct pn533_usb_phy *phy = dev->phy;
+ struct pn533_out_arg arg;
+ void *cntx;
int rc;

if (phy->priv == NULL)
@@ -168,10 +175,17 @@ static int pn533_usb_send_frame(struct pn533 *dev,
print_hex_dump_debug("PN533 TX: ", DUMP_PREFIX_NONE, 16, 1,
out->data, out->len, false);

+ init_completion(&arg.done);
+ cntx = phy->out_urb->context;
+ phy->out_urb->context = &arg;
+
rc = usb_submit_urb(phy->out_urb, GFP_KERNEL);
if (rc)
return rc;

+ wait_for_completion(&arg.done);
+ phy->out_urb->context = cntx;
+
if (dev->protocol_type == PN533_PROTO_REQ_RESP) {
/* request for response for sent packet directly */
rc = pn533_submit_urb_for_response(phy, GFP_KERNEL);
@@ -408,7 +422,31 @@ static int pn533_acr122_poweron_rdr(struct pn533_usb_phy *phy)
return arg.rc;
}

-static void pn533_send_complete(struct urb *urb)
+static void pn533_out_complete(struct urb *urb)
+{
+ struct pn533_out_arg *arg = urb->context;
+ struct pn533_usb_phy *phy = arg->phy;
+
+ switch (urb->status) {
+ case 0:
+ break; /* success */
+ case -ECONNRESET:
+ case -ENOENT:
+ dev_dbg(&phy->udev->dev,
+ "The urb has been stopped (status %d)\n",
+ urb->status);
+ break;
+ case -ESHUTDOWN:
+ default:
+ nfc_err(&phy->udev->dev,
+ "Urb failure (status %d)\n",
+ urb->status);
+ }
+
+ complete(&arg->done);
+}
+
+static void pn533_ack_complete(struct urb *urb)
{
struct pn533_usb_phy *phy = urb->context;

@@ -496,10 +534,10 @@ static int pn533_usb_probe(struct usb_interface *interface,

usb_fill_bulk_urb(phy->out_urb, phy->udev,
usb_sndbulkpipe(phy->udev, out_endpoint),
- NULL, 0, pn533_send_complete, phy);
+ NULL, 0, pn533_out_complete, phy);
usb_fill_bulk_urb(phy->ack_urb, phy->udev,
usb_sndbulkpipe(phy->udev, out_endpoint),
- NULL, 0, pn533_send_complete, phy);
+ NULL, 0, pn533_ack_complete, phy);

switch (id->driver_info) {
case PN533_DEVICE_STD:
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index fe199d568a4a..8d97b942de01 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -329,6 +329,8 @@ static blk_qc_t nvme_ns_head_submit_bio(struct bio *bio)
* pool from the original queue to allocate the bvecs from.
*/
blk_queue_split(&bio);
+ if (!bio)
+ return BLK_QC_T_NONE;

srcu_idx = srcu_read_lock(&head->srcu);
ns = nvme_find_path(head);
diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c
index 5c4acf2308d4..52d1fe5ec3e7 100644
--- a/drivers/pinctrl/pinctrl-amd.c
+++ b/drivers/pinctrl/pinctrl-amd.c
@@ -627,13 +627,15 @@ static bool do_amd_gpio_irq_handler(int irq, void *dev_id)
/* Each status bit covers four pins */
for (i = 0; i < 4; i++) {
regval = readl(regs + i);
- /* caused wake on resume context for shared IRQ */
- if (irq < 0 && (regval & BIT(WAKE_STS_OFF))) {
+
+ if (regval & PIN_IRQ_PENDING)
dev_dbg(&gpio_dev->pdev->dev,
- "Waking due to GPIO %d: 0x%x",
+ "GPIO %d is active: 0x%x",
irqnr + i, regval);
+
+ /* caused wake on resume context for shared IRQ */
+ if (irq < 0 && (regval & BIT(WAKE_STS_OFF)))
return true;
- }

if (!(regval & PIN_IRQ_PENDING) ||
!(regval & BIT(INTERRUPT_MASK_OFF)))
diff --git a/drivers/platform/surface/aggregator/controller.c b/drivers/platform/surface/aggregator/controller.c
index b8c377b3f932..f23f7128cf2b 100644
--- a/drivers/platform/surface/aggregator/controller.c
+++ b/drivers/platform/surface/aggregator/controller.c
@@ -1700,8 +1700,10 @@ int ssam_request_sync(struct ssam_controller *ctrl,
return status;

status = ssam_request_sync_init(rqst, spec->flags);
- if (status)
+ if (status) {
+ ssam_request_sync_free(rqst);
return status;
+ }

ssam_request_sync_set_resp(rqst, rsp);

diff --git a/drivers/platform/surface/aggregator/ssh_request_layer.c b/drivers/platform/surface/aggregator/ssh_request_layer.c
index 790f7f0eee98..7c0b637c91fc 100644
--- a/drivers/platform/surface/aggregator/ssh_request_layer.c
+++ b/drivers/platform/surface/aggregator/ssh_request_layer.c
@@ -916,6 +916,20 @@ static void ssh_rtl_rx_command(struct ssh_ptl *p, const struct ssam_span *data)
if (sshp_parse_command(dev, data, &command, &command_data))
return;

+ /*
+ * Check if the message was intended for us. If not, drop it.
+ *
+ * Note: We will need to change this to handle debug messages. On newer
+ * generation devices, these seem to be sent to tid_out=0x03. We as
+ * host can still receive them as they can be forwarded via an override
+ * option on SAM, but doing so does not change tid_out=0x00.
+ */
+ if (command->tid_out != 0x00) {
+ rtl_warn(rtl, "rtl: dropping message not intended for us (tid = %#04x)\n",
+ command->tid_out);
+ return;
+ }
+
if (ssh_rqid_is_event(get_unaligned_le16(&command->rqid)))
ssh_rtl_rx_event(rtl, command, &command_data);
else
diff --git a/drivers/platform/x86/dell/dell-wmi-privacy.c b/drivers/platform/x86/dell/dell-wmi-privacy.c
index 074b7e68c227..7b79e987ca08 100644
--- a/drivers/platform/x86/dell/dell-wmi-privacy.c
+++ b/drivers/platform/x86/dell/dell-wmi-privacy.c
@@ -61,7 +61,7 @@ static const struct key_entry dell_wmi_keymap_type_0012[] = {
/* privacy mic mute */
{ KE_KEY, 0x0001, { KEY_MICMUTE } },
/* privacy camera mute */
- { KE_SW, 0x0002, { SW_CAMERA_LENS_COVER } },
+ { KE_VSW, 0x0002, { SW_CAMERA_LENS_COVER } },
{ KE_END, 0},
};

@@ -115,11 +115,15 @@ bool dell_privacy_process_event(int type, int code, int status)

switch (code) {
case DELL_PRIVACY_AUDIO_EVENT: /* Mic mute */
- case DELL_PRIVACY_CAMERA_EVENT: /* Camera mute */
priv->last_status = status;
sparse_keymap_report_entry(priv->input_dev, key, 1, true);
ret = true;
break;
+ case DELL_PRIVACY_CAMERA_EVENT: /* Camera mute */
+ priv->last_status = status;
+ sparse_keymap_report_entry(priv->input_dev, key, !(status & CAMERA_STATUS), false);
+ ret = true;
+ break;
default:
dev_dbg(&priv->wdev->dev, "unknown event type 0x%04x 0x%04x\n", type, code);
}
@@ -295,7 +299,7 @@ static int dell_privacy_wmi_probe(struct wmi_device *wdev, const void *context)
{
struct privacy_wmi_data *priv;
struct key_entry *keymap;
- int ret, i;
+ int ret, i, j;

ret = wmi_has_guid(DELL_PRIVACY_GUID);
if (!ret)
@@ -307,6 +311,11 @@ static int dell_privacy_wmi_probe(struct wmi_device *wdev, const void *context)

dev_set_drvdata(&wdev->dev, priv);
priv->wdev = wdev;
+
+ ret = get_current_status(priv->wdev);
+ if (ret)
+ return ret;
+
/* create evdev passing interface */
priv->input_dev = devm_input_allocate_device(&wdev->dev);
if (!priv->input_dev)
@@ -321,9 +330,20 @@ static int dell_privacy_wmi_probe(struct wmi_device *wdev, const void *context)
/* remap the keymap code with Dell privacy key type 0x12 as prefix
* KEY_MICMUTE scancode will be reported as 0x120001
*/
- for (i = 0; i < ARRAY_SIZE(dell_wmi_keymap_type_0012); i++) {
- keymap[i] = dell_wmi_keymap_type_0012[i];
- keymap[i].code |= (0x0012 << 16);
+ for (i = 0, j = 0; i < ARRAY_SIZE(dell_wmi_keymap_type_0012); i++) {
+ /*
+ * Unlike keys where only presses matter, userspace may act
+ * on switches in both of their positions. Only register
+ * SW_CAMERA_LENS_COVER if it is actually there.
+ */
+ if (dell_wmi_keymap_type_0012[i].type == KE_VSW &&
+ dell_wmi_keymap_type_0012[i].sw.code == SW_CAMERA_LENS_COVER &&
+ !(priv->features_present & BIT(DELL_PRIVACY_TYPE_CAMERA)))
+ continue;
+
+ keymap[j] = dell_wmi_keymap_type_0012[i];
+ keymap[j].code |= (0x0012 << 16);
+ j++;
}
ret = sparse_keymap_setup(priv->input_dev, keymap, NULL);
kfree(keymap);
@@ -334,11 +354,12 @@ static int dell_privacy_wmi_probe(struct wmi_device *wdev, const void *context)
priv->input_dev->name = "Dell Privacy Driver";
priv->input_dev->id.bustype = BUS_HOST;

- ret = input_register_device(priv->input_dev);
- if (ret)
- return ret;
+ /* Report initial camera-cover status */
+ if (priv->features_present & BIT(DELL_PRIVACY_TYPE_CAMERA))
+ input_report_switch(priv->input_dev, SW_CAMERA_LENS_COVER,
+ !(priv->last_status & CAMERA_STATUS));

- ret = get_current_status(priv->wdev);
+ ret = input_register_device(priv->input_dev);
if (ret)
return ret;

diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index 7c553581e870..e75b09a144a3 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -1493,6 +1493,12 @@ static const struct dmi_system_id set_fn_lock_led_list[] = {
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Legion R7000P2020H"),
}
},
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Legion 5 15ARH05"),
+ }
+ },
{}
};

diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index 704813374922..336dee9485d4 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -1892,14 +1892,21 @@ static int sony_nc_kbd_backlight_setup(struct platform_device *pd,
break;
}

- ret = sony_call_snc_handle(handle, probe_base, &result);
- if (ret)
- return ret;
+ /*
+ * Only probe if there is a separate probe_base, otherwise the probe call
+ * is equivalent to __sony_nc_kbd_backlight_mode_set(0), resulting in
+ * the keyboard backlight being turned off.
+ */
+ if (probe_base) {
+ ret = sony_call_snc_handle(handle, probe_base, &result);
+ if (ret)
+ return ret;

- if ((handle == 0x0137 && !(result & 0x02)) ||
- !(result & 0x01)) {
- dprintk("no backlight keyboard found\n");
- return 0;
+ if ((handle == 0x0137 && !(result & 0x02)) ||
+ !(result & 0x01)) {
+ dprintk("no backlight keyboard found\n");
+ return 0;
+ }
}

kbdbl_ctl = kzalloc(sizeof(*kbdbl_ctl), GFP_KERNEL);
diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c
index e01b32d1fa17..00828f5baa97 100644
--- a/drivers/regulator/da9211-regulator.c
+++ b/drivers/regulator/da9211-regulator.c
@@ -498,6 +498,12 @@ static int da9211_i2c_probe(struct i2c_client *i2c)

chip->chip_irq = i2c->irq;

+ ret = da9211_regulator_init(chip);
+ if (ret < 0) {
+ dev_err(chip->dev, "Failed to initialize regulator: %d\n", ret);
+ return ret;
+ }
+
if (chip->chip_irq != 0) {
ret = devm_request_threaded_irq(chip->dev, chip->chip_irq, NULL,
da9211_irq_handler,
@@ -512,11 +518,6 @@ static int da9211_i2c_probe(struct i2c_client *i2c)
dev_warn(chip->dev, "No IRQ configured\n");
}

- ret = da9211_regulator_init(chip);
-
- if (ret < 0)
- dev_err(chip->dev, "Failed to initialize regulator: %d\n", ret);
-
return ret;
}

diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c
index 5be3d1c39a78..54176c073547 100644
--- a/drivers/s390/block/dcssblk.c
+++ b/drivers/s390/block/dcssblk.c
@@ -866,6 +866,8 @@ dcssblk_submit_bio(struct bio *bio)
unsigned long bytes_done;

blk_queue_split(&bio);
+ if (!bio)
+ return BLK_QC_T_NONE;

bytes_done = 0;
dev_info = bio->bi_bdev->bd_disk->private_data;
diff --git a/drivers/scsi/mpi3mr/Makefile b/drivers/scsi/mpi3mr/Makefile
index 7c2063e04c81..7ebca0ba538d 100644
--- a/drivers/scsi/mpi3mr/Makefile
+++ b/drivers/scsi/mpi3mr/Makefile
@@ -1,4 +1,4 @@
# mpi3mr makefile
-obj-m += mpi3mr.o
+obj-$(CONFIG_SCSI_MPI3MR) += mpi3mr.o
mpi3mr-y += mpi3mr_os.o \
mpi3mr_fw.o \
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index be024b2b6bd4..766c3a59a900 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -2594,12 +2594,8 @@ _base_check_pcie_native_sgl(struct MPT3SAS_ADAPTER *ioc,

/* Get the SG list pointer and info. */
sges_left = scsi_dma_map(scmd);
- if (sges_left < 0) {
- sdev_printk(KERN_ERR, scmd->device,
- "scsi_dma_map failed: request for %d bytes!\n",
- scsi_bufflen(scmd));
+ if (sges_left < 0)
return 1;
- }

/* Check if we need to build a native SG list. */
if (!base_is_prp_possible(ioc, pcie_device,
@@ -2706,12 +2702,8 @@ _base_build_sg_scmd(struct MPT3SAS_ADAPTER *ioc,

sg_scmd = scsi_sglist(scmd);
sges_left = scsi_dma_map(scmd);
- if (sges_left < 0) {
- sdev_printk(KERN_ERR, scmd->device,
- "scsi_dma_map failed: request for %d bytes!\n",
- scsi_bufflen(scmd));
+ if (sges_left < 0)
return -ENOMEM;
- }

sg_local = &mpi_request->SGL;
sges_in_segment = ioc->max_sges_in_main_message;
@@ -2854,12 +2846,8 @@ _base_build_sg_scmd_ieee(struct MPT3SAS_ADAPTER *ioc,

sg_scmd = scsi_sglist(scmd);
sges_left = scsi_dma_map(scmd);
- if (sges_left < 0) {
- sdev_printk(KERN_ERR, scmd->device,
- "scsi_dma_map failed: request for %d bytes!\n",
- scsi_bufflen(scmd));
+ if (sges_left < 0)
return -ENOMEM;
- }

sg_local = &mpi_request->SGL;
sges_in_segment = (ioc->request_sz -
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index a428b8145dcc..0b06223f5714 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -2700,6 +2700,12 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
if (!down_read_trylock(&hba->clk_scaling_lock))
return SCSI_MLQUEUE_HOST_BUSY;

+ /*
+ * Allows the UFS error handler to wait for prior ufshcd_queuecommand()
+ * calls.
+ */
+ rcu_read_lock();
+
switch (hba->ufshcd_state) {
case UFSHCD_STATE_OPERATIONAL:
case UFSHCD_STATE_EH_SCHEDULED_NON_FATAL:
@@ -2766,7 +2772,10 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
}

ufshcd_send_command(hba, tag);
+
out:
+ rcu_read_unlock();
+
up_read(&hba->clk_scaling_lock);

if (ufs_trigger_eh()) {
@@ -5900,6 +5909,14 @@ static inline void ufshcd_schedule_eh_work(struct ufs_hba *hba)
}
}

+static void ufshcd_force_error_recovery(struct ufs_hba *hba)
+{
+ spin_lock_irq(hba->host->host_lock);
+ hba->force_reset = true;
+ ufshcd_schedule_eh_work(hba);
+ spin_unlock_irq(hba->host->host_lock);
+}
+
static void ufshcd_clk_scaling_allow(struct ufs_hba *hba, bool allow)
{
down_write(&hba->clk_scaling_lock);
@@ -5952,8 +5969,7 @@ static void ufshcd_err_handling_prepare(struct ufs_hba *hba)
}
ufshcd_scsi_block_requests(hba);
/* Drain ufshcd_queuecommand() */
- down_write(&hba->clk_scaling_lock);
- up_write(&hba->clk_scaling_lock);
+ synchronize_rcu();
cancel_work_sync(&hba->eeh_work);
}

@@ -8767,6 +8783,15 @@ static int __ufshcd_wl_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)

if (!hba->dev_info.b_rpm_dev_flush_capable) {
ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
+ if (ret && pm_op != UFS_SHUTDOWN_PM) {
+ /*
+ * If return err in suspend flow, IO will hang.
+ * Trigger error handler and break suspend for
+ * error recovery.
+ */
+ ufshcd_force_error_recovery(hba);
+ ret = -EBUSY;
+ }
if (ret)
goto enable_scaling;
}
@@ -8778,6 +8803,15 @@ static int __ufshcd_wl_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
*/
check_for_bkops = !ufshcd_is_ufs_dev_deepsleep(hba);
ret = ufshcd_link_state_transition(hba, req_link_state, check_for_bkops);
+ if (ret && pm_op != UFS_SHUTDOWN_PM) {
+ /*
+ * If return err in suspend flow, IO will hang.
+ * Trigger error handler and break suspend for
+ * error recovery.
+ */
+ ufshcd_force_error_recovery(hba);
+ ret = -EBUSY;
+ }
if (ret)
goto set_dev_active;

diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
index 8ee7ce120692..609a51137e96 100644
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -52,17 +52,22 @@ static DEFINE_SPINLOCK(xencons_lock);

static struct xencons_info *vtermno_to_xencons(int vtermno)
{
- struct xencons_info *entry, *n, *ret = NULL;
+ struct xencons_info *entry, *ret = NULL;
+ unsigned long flags;

- if (list_empty(&xenconsoles))
- return NULL;
+ spin_lock_irqsave(&xencons_lock, flags);
+ if (list_empty(&xenconsoles)) {
+ spin_unlock_irqrestore(&xencons_lock, flags);
+ return NULL;
+ }

- list_for_each_entry_safe(entry, n, &xenconsoles, list) {
+ list_for_each_entry(entry, &xenconsoles, list) {
if (entry->vtermno == vtermno) {
ret = entry;
break;
}
}
+ spin_unlock_irqrestore(&xencons_lock, flags);

return ret;
}
@@ -223,7 +228,7 @@ static int xen_hvm_console_init(void)
{
int r;
uint64_t v = 0;
- unsigned long gfn;
+ unsigned long gfn, flags;
struct xencons_info *info;

if (!xen_hvm_domain())
@@ -258,9 +263,9 @@ static int xen_hvm_console_init(void)
goto err;
info->vtermno = HVC_COOKIE;

- spin_lock(&xencons_lock);
+ spin_lock_irqsave(&xencons_lock, flags);
list_add_tail(&info->list, &xenconsoles);
- spin_unlock(&xencons_lock);
+ spin_unlock_irqrestore(&xencons_lock, flags);

return 0;
err:
@@ -283,6 +288,7 @@ static int xencons_info_pv_init(struct xencons_info *info, int vtermno)
static int xen_pv_console_init(void)
{
struct xencons_info *info;
+ unsigned long flags;

if (!xen_pv_domain())
return -ENODEV;
@@ -299,9 +305,9 @@ static int xen_pv_console_init(void)
/* already configured */
return 0;
}
- spin_lock(&xencons_lock);
+ spin_lock_irqsave(&xencons_lock, flags);
xencons_info_pv_init(info, HVC_COOKIE);
- spin_unlock(&xencons_lock);
+ spin_unlock_irqrestore(&xencons_lock, flags);

return 0;
}
@@ -309,6 +315,7 @@ static int xen_pv_console_init(void)
static int xen_initial_domain_console_init(void)
{
struct xencons_info *info;
+ unsigned long flags;

if (!xen_initial_domain())
return -ENODEV;
@@ -323,9 +330,9 @@ static int xen_initial_domain_console_init(void)
info->irq = bind_virq_to_irq(VIRQ_CONSOLE, 0, false);
info->vtermno = HVC_COOKIE;

- spin_lock(&xencons_lock);
+ spin_lock_irqsave(&xencons_lock, flags);
list_add_tail(&info->list, &xenconsoles);
- spin_unlock(&xencons_lock);
+ spin_unlock_irqrestore(&xencons_lock, flags);

return 0;
}
@@ -380,10 +387,12 @@ static void xencons_free(struct xencons_info *info)

static int xen_console_remove(struct xencons_info *info)
{
+ unsigned long flags;
+
xencons_disconnect_backend(info);
- spin_lock(&xencons_lock);
+ spin_lock_irqsave(&xencons_lock, flags);
list_del(&info->list);
- spin_unlock(&xencons_lock);
+ spin_unlock_irqrestore(&xencons_lock, flags);
if (info->xbdev != NULL)
xencons_free(info);
else {
@@ -464,6 +473,7 @@ static int xencons_probe(struct xenbus_device *dev,
{
int ret, devid;
struct xencons_info *info;
+ unsigned long flags;

devid = dev->nodename[strlen(dev->nodename) - 1] - '0';
if (devid == 0)
@@ -482,9 +492,9 @@ static int xencons_probe(struct xenbus_device *dev,
ret = xencons_connect_backend(dev, info);
if (ret < 0)
goto error;
- spin_lock(&xencons_lock);
+ spin_lock_irqsave(&xencons_lock, flags);
list_add_tail(&info->list, &xenconsoles);
- spin_unlock(&xencons_lock);
+ spin_unlock_irqrestore(&xencons_lock, flags);

return 0;

@@ -583,10 +593,12 @@ static int __init xen_hvc_init(void)

info->hvc = hvc_alloc(HVC_COOKIE, info->irq, ops, 256);
if (IS_ERR(info->hvc)) {
+ unsigned long flags;
+
r = PTR_ERR(info->hvc);
- spin_lock(&xencons_lock);
+ spin_lock_irqsave(&xencons_lock, flags);
list_del(&info->list);
- spin_unlock(&xencons_lock);
+ spin_unlock_irqrestore(&xencons_lock, flags);
if (info->irq)
unbind_from_irqhandler(info->irq, NULL);
kfree(info);
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index bbdf3281559c..4308b27ba346 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -459,6 +459,7 @@ smb3_create_mf_symlink(unsigned int xid, struct cifs_tcon *tcon,
oparms.disposition = FILE_CREATE;
oparms.fid = &fid;
oparms.reconnect = false;
+ oparms.mode = 0644;

rc = SMB2_open(xid, &oparms, utf16_path, &oplock, NULL, NULL,
NULL, NULL);
diff --git a/include/linux/tpm_eventlog.h b/include/linux/tpm_eventlog.h
index 20c0ff54b7a0..7d68a5cc5881 100644
--- a/include/linux/tpm_eventlog.h
+++ b/include/linux/tpm_eventlog.h
@@ -198,8 +198,8 @@ static __always_inline int __calc_tpm2_event_size(struct tcg_pcr_event2_head *ev
* The loop below will unmap these fields if the log is larger than
* one page, so save them here for reference:
*/
- count = READ_ONCE(event->count);
- event_type = READ_ONCE(event->event_type);
+ count = event->count;
+ event_type = event->event_type;

/* Verify that it's the log header */
if (event_header->pcr_idx != 0 ||
diff --git a/io_uring/io-wq.c b/io_uring/io-wq.c
index 6031fb319d87..87bc38b47103 100644
--- a/io_uring/io-wq.c
+++ b/io_uring/io-wq.c
@@ -1217,6 +1217,12 @@ static void io_wq_cancel_tw_create(struct io_wq *wq)

worker = container_of(cb, struct io_worker, create_work);
io_worker_cancel_cb(worker);
+ /*
+ * Only the worker continuation helper has worker allocated and
+ * hence needs freeing.
+ */
+ if (cb->func == create_worker_cont)
+ kfree(worker);
}
}

diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c
index c587221a289c..9a01188ff45a 100644
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -2477,12 +2477,26 @@ static void io_iopoll_complete(struct io_ring_ctx *ctx, unsigned int *nr_events,

io_init_req_batch(&rb);
while (!list_empty(done)) {
+ struct io_uring_cqe *cqe;
+ unsigned cflags;
+
req = list_first_entry(done, struct io_kiocb, inflight_entry);
list_del(&req->inflight_entry);
-
- io_fill_cqe_req(req, req->result, io_put_rw_kbuf(req));
+ cflags = io_put_rw_kbuf(req);
(*nr_events)++;

+ cqe = io_get_cqe(ctx);
+ if (cqe) {
+ WRITE_ONCE(cqe->user_data, req->user_data);
+ WRITE_ONCE(cqe->res, req->result);
+ WRITE_ONCE(cqe->flags, cflags);
+ } else {
+ spin_lock(&ctx->completion_lock);
+ io_cqring_event_overflow(ctx, req->user_data,
+ req->result, cflags);
+ spin_unlock(&ctx->completion_lock);
+ }
+
if (req_ref_put_and_test(req))
io_req_free_batch(&rb, req, &ctx->submit_state);
}
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index bb684fe1b96e..2bd5e235d078 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -2501,14 +2501,43 @@ void do_set_cpus_allowed(struct task_struct *p, const struct cpumask *new_mask)
int dup_user_cpus_ptr(struct task_struct *dst, struct task_struct *src,
int node)
{
- if (!src->user_cpus_ptr)
+ cpumask_t *user_mask;
+ unsigned long flags;
+
+ /*
+ * Always clear dst->user_cpus_ptr first as their user_cpus_ptr's
+ * may differ by now due to racing.
+ */
+ dst->user_cpus_ptr = NULL;
+
+ /*
+ * This check is racy and losing the race is a valid situation.
+ * It is not worth the extra overhead of taking the pi_lock on
+ * every fork/clone.
+ */
+ if (data_race(!src->user_cpus_ptr))
return 0;

- dst->user_cpus_ptr = kmalloc_node(cpumask_size(), GFP_KERNEL, node);
- if (!dst->user_cpus_ptr)
+ user_mask = kmalloc_node(cpumask_size(), GFP_KERNEL, node);
+ if (!user_mask)
return -ENOMEM;

- cpumask_copy(dst->user_cpus_ptr, src->user_cpus_ptr);
+ /*
+ * Use pi_lock to protect content of user_cpus_ptr
+ *
+ * Though unlikely, user_cpus_ptr can be reset to NULL by a concurrent
+ * do_set_cpus_allowed().
+ */
+ raw_spin_lock_irqsave(&src->pi_lock, flags);
+ if (src->user_cpus_ptr) {
+ swap(dst->user_cpus_ptr, user_mask);
+ cpumask_copy(dst->user_cpus_ptr, src->user_cpus_ptr);
+ }
+ raw_spin_unlock_irqrestore(&src->pi_lock, flags);
+
+ if (unlikely(user_mask))
+ kfree(user_mask);
+
return 0;
}

diff --git a/mm/memblock.c b/mm/memblock.c
index 2b7397781c99..838d59a74c65 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -1615,7 +1615,13 @@ void __init __memblock_free_late(phys_addr_t base, phys_addr_t size)
end = PFN_DOWN(base + size);

for (; cursor < end; cursor++) {
- memblock_free_pages(pfn_to_page(cursor), cursor, 0);
+ /*
+ * Reserved pages are always initialized by the end of
+ * memblock_free_all() (by memmap_init() and, if deferred
+ * initialization is enabled, memmap_init_reserved_pages()), so
+ * these pages can be released directly to the buddy allocator.
+ */
+ __free_pages_core(pfn_to_page(cursor), 0);
totalram_pages_inc();
}
}
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index c51d5ce3711c..c68020b8de89 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -539,6 +539,7 @@ static int rawv6_recvmsg(struct sock *sk, struct msghdr *msg, size_t len,
static int rawv6_push_pending_frames(struct sock *sk, struct flowi6 *fl6,
struct raw6_sock *rp)
{
+ struct ipv6_txoptions *opt;
struct sk_buff *skb;
int err = 0;
int offset;
@@ -556,6 +557,9 @@ static int rawv6_push_pending_frames(struct sock *sk, struct flowi6 *fl6,

offset = rp->offset;
total_len = inet_sk(sk)->cork.base.length;
+ opt = inet6_sk(sk)->cork.opt;
+ total_len -= opt ? opt->opt_flen : 0;
+
if (offset >= total_len - 1) {
err = -EINVAL;
ip6_flush_pending_frames(sk);
diff --git a/net/netfilter/ipset/ip_set_bitmap_ip.c b/net/netfilter/ipset/ip_set_bitmap_ip.c
index a8ce04a4bb72..e4fa00abde6a 100644
--- a/net/netfilter/ipset/ip_set_bitmap_ip.c
+++ b/net/netfilter/ipset/ip_set_bitmap_ip.c
@@ -308,8 +308,8 @@ bitmap_ip_create(struct net *net, struct ip_set *set, struct nlattr *tb[],
return -IPSET_ERR_BITMAP_RANGE;

pr_debug("mask_bits %u, netmask %u\n", mask_bits, netmask);
- hosts = 2 << (32 - netmask - 1);
- elements = 2 << (netmask - mask_bits - 1);
+ hosts = 2U << (32 - netmask - 1);
+ elements = 2UL << (netmask - mask_bits - 1);
}
if (elements > IPSET_BITMAP_MAX_RANGE + 1)
return -IPSET_ERR_BITMAP_RANGE_SIZE;
diff --git a/net/netfilter/nft_payload.c b/net/netfilter/nft_payload.c
index da652c21368e..208a6f59281d 100644
--- a/net/netfilter/nft_payload.c
+++ b/net/netfilter/nft_payload.c
@@ -63,7 +63,7 @@ nft_payload_copy_vlan(u32 *d, const struct sk_buff *skb, u8 offset, u8 len)
return false;

if (offset + len > VLAN_ETH_HLEN + vlan_hlen)
- ethlen -= offset + len - VLAN_ETH_HLEN + vlan_hlen;
+ ethlen -= offset + len - VLAN_ETH_HLEN - vlan_hlen;

memcpy(dst_u8, vlanh + offset - vlan_hlen, ethlen);

diff --git a/net/sched/act_mpls.c b/net/sched/act_mpls.c
index e4529b428cf4..db0ef0486309 100644
--- a/net/sched/act_mpls.c
+++ b/net/sched/act_mpls.c
@@ -133,6 +133,11 @@ static int valid_label(const struct nlattr *attr,
{
const u32 *label = nla_data(attr);

+ if (nla_len(attr) != sizeof(*label)) {
+ NL_SET_ERR_MSG_MOD(extack, "Invalid MPLS label length");
+ return -EINVAL;
+ }
+
if (*label & ~MPLS_LABEL_MASK || *label == MPLS_LABEL_IMPLNULL) {
NL_SET_ERR_MSG_MOD(extack, "MPLS label out of range");
return -EINVAL;
@@ -144,7 +149,8 @@ static int valid_label(const struct nlattr *attr,
static const struct nla_policy mpls_policy[TCA_MPLS_MAX + 1] = {
[TCA_MPLS_PARMS] = NLA_POLICY_EXACT_LEN(sizeof(struct tc_mpls)),
[TCA_MPLS_PROTO] = { .type = NLA_U16 },
- [TCA_MPLS_LABEL] = NLA_POLICY_VALIDATE_FN(NLA_U32, valid_label),
+ [TCA_MPLS_LABEL] = NLA_POLICY_VALIDATE_FN(NLA_BINARY,
+ valid_label),
[TCA_MPLS_TC] = NLA_POLICY_RANGE(NLA_U8, 0, 7),
[TCA_MPLS_TTL] = NLA_POLICY_MIN(NLA_U8, 1),
[TCA_MPLS_BOS] = NLA_POLICY_RANGE(NLA_U8, 0, 1),
diff --git a/net/tipc/node.c b/net/tipc/node.c
index 49ddc484c4fe..5e000fde8067 100644
--- a/net/tipc/node.c
+++ b/net/tipc/node.c
@@ -1179,8 +1179,9 @@ void tipc_node_check_dest(struct net *net, u32 addr,
bool addr_match = false;
bool sign_match = false;
bool link_up = false;
+ bool link_is_reset = false;
bool accept_addr = false;
- bool reset = true;
+ bool reset = false;
char *if_name;
unsigned long intv;
u16 session;
@@ -1200,14 +1201,14 @@ void tipc_node_check_dest(struct net *net, u32 addr,
/* Prepare to validate requesting node's signature and media address */
l = le->link;
link_up = l && tipc_link_is_up(l);
+ link_is_reset = l && tipc_link_is_reset(l);
addr_match = l && !memcmp(&le->maddr, maddr, sizeof(*maddr));
sign_match = (signature == n->signature);

/* These three flags give us eight permutations: */

if (sign_match && addr_match && link_up) {
- /* All is fine. Do nothing. */
- reset = false;
+ /* All is fine. Ignore requests. */
/* Peer node is not a container/local namespace */
if (!n->peer_hash_mix)
n->peer_hash_mix = hash_mixes;
@@ -1232,6 +1233,7 @@ void tipc_node_check_dest(struct net *net, u32 addr,
*/
accept_addr = true;
*respond = true;
+ reset = true;
} else if (!sign_match && addr_match && link_up) {
/* Peer node rebooted. Two possibilities:
* - Delayed re-discovery; this link endpoint has already
@@ -1263,6 +1265,7 @@ void tipc_node_check_dest(struct net *net, u32 addr,
n->signature = signature;
accept_addr = true;
*respond = true;
+ reset = true;
}

if (!accept_addr)
@@ -1291,6 +1294,7 @@ void tipc_node_check_dest(struct net *net, u32 addr,
tipc_link_fsm_evt(l, LINK_RESET_EVT);
if (n->state == NODE_FAILINGOVER)
tipc_link_fsm_evt(l, LINK_FAILOVER_BEGIN_EVT);
+ link_is_reset = tipc_link_is_reset(l);
le->link = l;
n->link_cnt++;
tipc_node_calculate_timer(n, l);
@@ -1303,7 +1307,7 @@ void tipc_node_check_dest(struct net *net, u32 addr,
memcpy(&le->maddr, maddr, sizeof(*maddr));
exit:
tipc_node_write_unlock(n);
- if (reset && l && !tipc_link_is_reset(l))
+ if (reset && !link_is_reset)
tipc_node_link_down(n, b->identity, false);
tipc_node_put(n);
}
diff --git a/sound/core/control_led.c b/sound/core/control_led.c
index a95332b2b90b..3eb1c5af82ad 100644
--- a/sound/core/control_led.c
+++ b/sound/core/control_led.c
@@ -530,12 +530,11 @@ static ssize_t set_led_id(struct snd_ctl_led_card *led_card, const char *buf, si
bool attach)
{
char buf2[256], *s, *os;
- size_t len = max(sizeof(s) - 1, count);
struct snd_ctl_elem_id id;
int err;

- strncpy(buf2, buf, len);
- buf2[len] = '\0';
+ if (strscpy(buf2, buf, sizeof(buf2)) < 0)
+ return -E2BIG;
memset(&id, 0, sizeof(id));
id.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
s = buf2;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 47fdf7dc2472..c7321f5842b3 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -3558,6 +3558,15 @@ static void alc256_init(struct hda_codec *codec)
hda_nid_t hp_pin = alc_get_hp_pin(spec);
bool hp_pin_sense;

+ if (spec->ultra_low_power) {
+ alc_update_coef_idx(codec, 0x03, 1<<1, 1<<1);
+ alc_update_coef_idx(codec, 0x08, 3<<2, 3<<2);
+ alc_update_coef_idx(codec, 0x08, 7<<4, 0);
+ alc_update_coef_idx(codec, 0x3b, 1<<15, 0);
+ alc_update_coef_idx(codec, 0x0e, 7<<6, 7<<6);
+ msleep(30);
+ }
+
if (!hp_pin)
hp_pin = 0x21;

@@ -3569,14 +3578,6 @@ static void alc256_init(struct hda_codec *codec)
msleep(2);

alc_update_coefex_idx(codec, 0x57, 0x04, 0x0007, 0x1); /* Low power */
- if (spec->ultra_low_power) {
- alc_update_coef_idx(codec, 0x03, 1<<1, 1<<1);
- alc_update_coef_idx(codec, 0x08, 3<<2, 3<<2);
- alc_update_coef_idx(codec, 0x08, 7<<4, 0);
- alc_update_coef_idx(codec, 0x3b, 1<<15, 0);
- alc_update_coef_idx(codec, 0x0e, 7<<6, 7<<6);
- msleep(30);
- }

snd_hda_codec_write(codec, hp_pin, 0,
AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
@@ -3707,6 +3708,13 @@ static void alc225_init(struct hda_codec *codec)
hda_nid_t hp_pin = alc_get_hp_pin(spec);
bool hp1_pin_sense, hp2_pin_sense;

+ if (spec->ultra_low_power) {
+ alc_update_coef_idx(codec, 0x08, 0x0f << 2, 3<<2);
+ alc_update_coef_idx(codec, 0x0e, 7<<6, 7<<6);
+ alc_update_coef_idx(codec, 0x33, 1<<11, 0);
+ msleep(30);
+ }
+
if (spec->codec_variant != ALC269_TYPE_ALC287 &&
spec->codec_variant != ALC269_TYPE_ALC245)
/* required only at boot or S3 and S4 resume time */
@@ -3728,12 +3736,6 @@ static void alc225_init(struct hda_codec *codec)
msleep(2);

alc_update_coefex_idx(codec, 0x57, 0x04, 0x0007, 0x1); /* Low power */
- if (spec->ultra_low_power) {
- alc_update_coef_idx(codec, 0x08, 0x0f << 2, 3<<2);
- alc_update_coef_idx(codec, 0x0e, 7<<6, 7<<6);
- alc_update_coef_idx(codec, 0x33, 1<<11, 0);
- msleep(30);
- }

if (hp1_pin_sense || spec->ultra_low_power)
snd_hda_codec_write(codec, hp_pin, 0,
@@ -4637,6 +4639,16 @@ static void alc285_fixup_hp_coef_micmute_led(struct hda_codec *codec,
}
}

+static void alc285_fixup_hp_gpio_micmute_led(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ struct alc_spec *spec = codec->spec;
+
+ if (action == HDA_FIXUP_ACT_PRE_PROBE)
+ spec->micmute_led_polarity = 1;
+ alc_fixup_hp_gpio_led(codec, action, 0, 0x04);
+}
+
static void alc236_fixup_hp_coef_micmute_led(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
@@ -4658,6 +4670,13 @@ static void alc285_fixup_hp_mute_led(struct hda_codec *codec,
alc285_fixup_hp_coef_micmute_led(codec, fix, action);
}

+static void alc285_fixup_hp_spectre_x360_mute_led(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ alc285_fixup_hp_mute_led_coefbit(codec, fix, action);
+ alc285_fixup_hp_gpio_micmute_led(codec, fix, action);
+}
+
static void alc236_fixup_hp_mute_led(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
@@ -6911,6 +6930,7 @@ enum {
ALC285_FIXUP_ASUS_G533Z_PINS,
ALC285_FIXUP_HP_GPIO_LED,
ALC285_FIXUP_HP_MUTE_LED,
+ ALC285_FIXUP_HP_SPECTRE_X360_MUTE_LED,
ALC236_FIXUP_HP_GPIO_LED,
ALC236_FIXUP_HP_MUTE_LED,
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF,
@@ -8280,6 +8300,10 @@ static const struct hda_fixup alc269_fixups[] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc285_fixup_hp_mute_led,
},
+ [ALC285_FIXUP_HP_SPECTRE_X360_MUTE_LED] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc285_fixup_hp_spectre_x360_mute_led,
+ },
[ALC236_FIXUP_HP_GPIO_LED] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc236_fixup_hp_gpio_led,
@@ -8998,6 +9022,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x86c7, "HP Envy AiO 32", ALC274_FIXUP_HP_ENVY_GPIO),
SND_PCI_QUIRK(0x103c, 0x86e7, "HP Spectre x360 15-eb0xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1),
SND_PCI_QUIRK(0x103c, 0x86e8, "HP Spectre x360 15-eb0xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1),
+ SND_PCI_QUIRK(0x103c, 0x86f9, "HP Spectre x360 13-aw0xxx", ALC285_FIXUP_HP_SPECTRE_X360_MUTE_LED),
SND_PCI_QUIRK(0x103c, 0x8716, "HP Elite Dragonfly G2 Notebook PC", ALC285_FIXUP_HP_GPIO_AMP_INIT),
SND_PCI_QUIRK(0x103c, 0x8720, "HP EliteBook x360 1040 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_AMP_INIT),
SND_PCI_QUIRK(0x103c, 0x8724, "HP EliteBook 850 G7", ALC285_FIXUP_HP_GPIO_LED),
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
index a02a77fef360..6759ce7e09ff 100644
--- a/sound/soc/codecs/wm8904.c
+++ b/sound/soc/codecs/wm8904.c
@@ -697,6 +697,7 @@ static int out_pga_event(struct snd_soc_dapm_widget *w,
int dcs_mask;
int dcs_l, dcs_r;
int dcs_l_reg, dcs_r_reg;
+ int an_out_reg;
int timeout;
int pwr_reg;

@@ -712,6 +713,7 @@ static int out_pga_event(struct snd_soc_dapm_widget *w,
dcs_mask = WM8904_DCS_ENA_CHAN_0 | WM8904_DCS_ENA_CHAN_1;
dcs_r_reg = WM8904_DC_SERVO_8;
dcs_l_reg = WM8904_DC_SERVO_9;
+ an_out_reg = WM8904_ANALOGUE_OUT1_LEFT;
dcs_l = 0;
dcs_r = 1;
break;
@@ -720,6 +722,7 @@ static int out_pga_event(struct snd_soc_dapm_widget *w,
dcs_mask = WM8904_DCS_ENA_CHAN_2 | WM8904_DCS_ENA_CHAN_3;
dcs_r_reg = WM8904_DC_SERVO_6;
dcs_l_reg = WM8904_DC_SERVO_7;
+ an_out_reg = WM8904_ANALOGUE_OUT2_LEFT;
dcs_l = 2;
dcs_r = 3;
break;
@@ -792,6 +795,10 @@ static int out_pga_event(struct snd_soc_dapm_widget *w,
snd_soc_component_update_bits(component, reg,
WM8904_HPL_ENA_OUTP | WM8904_HPR_ENA_OUTP,
WM8904_HPL_ENA_OUTP | WM8904_HPR_ENA_OUTP);
+
+ /* Update volume, requires PGA to be powered */
+ val = snd_soc_component_read(component, an_out_reg);
+ snd_soc_component_write(component, an_out_reg, val);
break;

case SND_SOC_DAPM_POST_PMU:
diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
index 5e8d045c1a06..9f5e3e1dfd94 100644
--- a/sound/soc/qcom/lpass-cpu.c
+++ b/sound/soc/qcom/lpass-cpu.c
@@ -851,10 +851,11 @@ static void of_lpass_cpu_parse_dai_data(struct device *dev,
struct lpass_data *data)
{
struct device_node *node;
- int ret, id;
+ int ret, i, id;

/* Allow all channels by default for backwards compatibility */
- for (id = 0; id < data->variant->num_dai; id++) {
+ for (i = 0; i < data->variant->num_dai; i++) {
+ id = data->variant->dai_driver[i].id;
data->mi2s_playback_sd_mode[id] = LPAIF_I2SCTL_MODE_8CH;
data->mi2s_capture_sd_mode[id] = LPAIF_I2SCTL_MODE_8CH;
}
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index b6cd43c5ea3e..87a30be64324 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -525,6 +525,8 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream,
if (snd_usb_endpoint_compatible(chip, subs->data_endpoint,
fmt, hw_params))
goto unlock;
+ if (stop_endpoints(subs, false))
+ sync_pending_stops(subs);
close_endpoints(chip, subs);
}

@@ -907,8 +909,13 @@ get_sync_ep_from_substream(struct snd_usb_substream *subs)
continue;
/* for the implicit fb, check the sync ep as well */
ep = snd_usb_get_endpoint(chip, fp->sync_ep);
- if (ep && ep->cur_audiofmt)
- return ep;
+ if (ep && ep->cur_audiofmt) {
+ /* ditto, if the sync (data) ep is used by others,
+ * this stream is restricted by the sync ep
+ */
+ if (ep != subs->sync_endpoint || ep->opened > 1)
+ return ep;
+ }
}
return NULL;
}
diff --git a/tools/include/nolibc/arch-aarch64.h b/tools/include/nolibc/arch-aarch64.h
new file mode 100644
index 000000000000..2dbd80d633cb
--- /dev/null
+++ b/tools/include/nolibc/arch-aarch64.h
@@ -0,0 +1,199 @@
+/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
+/*
+ * AARCH64 specific definitions for NOLIBC
+ * Copyright (C) 2017-2022 Willy Tarreau <w@1wt.eu>
+ */
+
+#ifndef _NOLIBC_ARCH_AARCH64_H
+#define _NOLIBC_ARCH_AARCH64_H
+
+/* O_* macros for fcntl/open are architecture-specific */
+#define O_RDONLY 0
+#define O_WRONLY 1
+#define O_RDWR 2
+#define O_CREAT 0x40
+#define O_EXCL 0x80
+#define O_NOCTTY 0x100
+#define O_TRUNC 0x200
+#define O_APPEND 0x400
+#define O_NONBLOCK 0x800
+#define O_DIRECTORY 0x4000
+
+/* The struct returned by the newfstatat() syscall. Differs slightly from the
+ * x86_64's stat one by field ordering, so be careful.
+ */
+struct sys_stat_struct {
+ unsigned long st_dev;
+ unsigned long st_ino;
+ unsigned int st_mode;
+ unsigned int st_nlink;
+ unsigned int st_uid;
+ unsigned int st_gid;
+
+ unsigned long st_rdev;
+ unsigned long __pad1;
+ long st_size;
+ int st_blksize;
+ int __pad2;
+
+ long st_blocks;
+ long st_atime;
+ unsigned long st_atime_nsec;
+ long st_mtime;
+
+ unsigned long st_mtime_nsec;
+ long st_ctime;
+ unsigned long st_ctime_nsec;
+ unsigned int __unused[2];
+};
+
+/* Syscalls for AARCH64 :
+ * - registers are 64-bit
+ * - stack is 16-byte aligned
+ * - syscall number is passed in x8
+ * - arguments are in x0, x1, x2, x3, x4, x5
+ * - the system call is performed by calling svc 0
+ * - syscall return comes in x0.
+ * - the arguments are cast to long and assigned into the target registers
+ * which are then simply passed as registers to the asm code, so that we
+ * don't have to experience issues with register constraints.
+ *
+ * On aarch64, select() is not implemented so we have to use pselect6().
+ */
+#define __ARCH_WANT_SYS_PSELECT6
+
+#define my_syscall0(num) \
+({ \
+ register long _num asm("x8") = (num); \
+ register long _arg1 asm("x0"); \
+ \
+ asm volatile ( \
+ "svc #0\n" \
+ : "=r"(_arg1) \
+ : "r"(_num) \
+ : "memory", "cc" \
+ ); \
+ _arg1; \
+})
+
+#define my_syscall1(num, arg1) \
+({ \
+ register long _num asm("x8") = (num); \
+ register long _arg1 asm("x0") = (long)(arg1); \
+ \
+ asm volatile ( \
+ "svc #0\n" \
+ : "=r"(_arg1) \
+ : "r"(_arg1), \
+ "r"(_num) \
+ : "memory", "cc" \
+ ); \
+ _arg1; \
+})
+
+#define my_syscall2(num, arg1, arg2) \
+({ \
+ register long _num asm("x8") = (num); \
+ register long _arg1 asm("x0") = (long)(arg1); \
+ register long _arg2 asm("x1") = (long)(arg2); \
+ \
+ asm volatile ( \
+ "svc #0\n" \
+ : "=r"(_arg1) \
+ : "r"(_arg1), "r"(_arg2), \
+ "r"(_num) \
+ : "memory", "cc" \
+ ); \
+ _arg1; \
+})
+
+#define my_syscall3(num, arg1, arg2, arg3) \
+({ \
+ register long _num asm("x8") = (num); \
+ register long _arg1 asm("x0") = (long)(arg1); \
+ register long _arg2 asm("x1") = (long)(arg2); \
+ register long _arg3 asm("x2") = (long)(arg3); \
+ \
+ asm volatile ( \
+ "svc #0\n" \
+ : "=r"(_arg1) \
+ : "r"(_arg1), "r"(_arg2), "r"(_arg3), \
+ "r"(_num) \
+ : "memory", "cc" \
+ ); \
+ _arg1; \
+})
+
+#define my_syscall4(num, arg1, arg2, arg3, arg4) \
+({ \
+ register long _num asm("x8") = (num); \
+ register long _arg1 asm("x0") = (long)(arg1); \
+ register long _arg2 asm("x1") = (long)(arg2); \
+ register long _arg3 asm("x2") = (long)(arg3); \
+ register long _arg4 asm("x3") = (long)(arg4); \
+ \
+ asm volatile ( \
+ "svc #0\n" \
+ : "=r"(_arg1) \
+ : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), \
+ "r"(_num) \
+ : "memory", "cc" \
+ ); \
+ _arg1; \
+})
+
+#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \
+({ \
+ register long _num asm("x8") = (num); \
+ register long _arg1 asm("x0") = (long)(arg1); \
+ register long _arg2 asm("x1") = (long)(arg2); \
+ register long _arg3 asm("x2") = (long)(arg3); \
+ register long _arg4 asm("x3") = (long)(arg4); \
+ register long _arg5 asm("x4") = (long)(arg5); \
+ \
+ asm volatile ( \
+ "svc #0\n" \
+ : "=r" (_arg1) \
+ : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
+ "r"(_num) \
+ : "memory", "cc" \
+ ); \
+ _arg1; \
+})
+
+#define my_syscall6(num, arg1, arg2, arg3, arg4, arg5, arg6) \
+({ \
+ register long _num asm("x8") = (num); \
+ register long _arg1 asm("x0") = (long)(arg1); \
+ register long _arg2 asm("x1") = (long)(arg2); \
+ register long _arg3 asm("x2") = (long)(arg3); \
+ register long _arg4 asm("x3") = (long)(arg4); \
+ register long _arg5 asm("x4") = (long)(arg5); \
+ register long _arg6 asm("x5") = (long)(arg6); \
+ \
+ asm volatile ( \
+ "svc #0\n" \
+ : "=r" (_arg1) \
+ : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
+ "r"(_arg6), "r"(_num) \
+ : "memory", "cc" \
+ ); \
+ _arg1; \
+})
+
+/* startup code */
+asm(".section .text\n"
+ ".weak _start\n"
+ "_start:\n"
+ "ldr x0, [sp]\n" // argc (x0) was in the stack
+ "add x1, sp, 8\n" // argv (x1) = sp
+ "lsl x2, x0, 3\n" // envp (x2) = 8*argc ...
+ "add x2, x2, 8\n" // + 8 (skip null)
+ "add x2, x2, x1\n" // + argv
+ "and sp, x1, -16\n" // sp must be 16-byte aligned in the callee
+ "bl main\n" // main() returns the status code, we'll exit with it.
+ "mov x8, 93\n" // NR_exit == 93
+ "svc #0\n"
+ "");
+
+#endif // _NOLIBC_ARCH_AARCH64_H
diff --git a/tools/include/nolibc/arch-arm.h b/tools/include/nolibc/arch-arm.h
new file mode 100644
index 000000000000..1191395b5acd
--- /dev/null
+++ b/tools/include/nolibc/arch-arm.h
@@ -0,0 +1,204 @@
+/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
+/*
+ * ARM specific definitions for NOLIBC
+ * Copyright (C) 2017-2022 Willy Tarreau <w@1wt.eu>
+ */
+
+#ifndef _NOLIBC_ARCH_ARM_H
+#define _NOLIBC_ARCH_ARM_H
+
+/* O_* macros for fcntl/open are architecture-specific */
+#define O_RDONLY 0
+#define O_WRONLY 1
+#define O_RDWR 2
+#define O_CREAT 0x40
+#define O_EXCL 0x80
+#define O_NOCTTY 0x100
+#define O_TRUNC 0x200
+#define O_APPEND 0x400
+#define O_NONBLOCK 0x800
+#define O_DIRECTORY 0x4000
+
+/* The struct returned by the stat() syscall, 32-bit only, the syscall returns
+ * exactly 56 bytes (stops before the unused array). In big endian, the format
+ * differs as devices are returned as short only.
+ */
+struct sys_stat_struct {
+#if defined(__ARMEB__)
+ unsigned short st_dev;
+ unsigned short __pad1;
+#else
+ unsigned long st_dev;
+#endif
+ unsigned long st_ino;
+ unsigned short st_mode;
+ unsigned short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+
+#if defined(__ARMEB__)
+ unsigned short st_rdev;
+ unsigned short __pad2;
+#else
+ unsigned long st_rdev;
+#endif
+ unsigned long st_size;
+ unsigned long st_blksize;
+ unsigned long st_blocks;
+
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+ unsigned long st_mtime;
+ unsigned long st_mtime_nsec;
+
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+ unsigned long __unused[2];
+};
+
+/* Syscalls for ARM in ARM or Thumb modes :
+ * - registers are 32-bit
+ * - stack is 8-byte aligned
+ * ( http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.faqs/ka4127.html)
+ * - syscall number is passed in r7
+ * - arguments are in r0, r1, r2, r3, r4, r5
+ * - the system call is performed by calling svc #0
+ * - syscall return comes in r0.
+ * - only lr is clobbered.
+ * - the arguments are cast to long and assigned into the target registers
+ * which are then simply passed as registers to the asm code, so that we
+ * don't have to experience issues with register constraints.
+ * - the syscall number is always specified last in order to allow to force
+ * some registers before (gcc refuses a %-register at the last position).
+ *
+ * Also, ARM supports the old_select syscall if newselect is not available
+ */
+#define __ARCH_WANT_SYS_OLD_SELECT
+
+#define my_syscall0(num) \
+({ \
+ register long _num asm("r7") = (num); \
+ register long _arg1 asm("r0"); \
+ \
+ asm volatile ( \
+ "svc #0\n" \
+ : "=r"(_arg1) \
+ : "r"(_num) \
+ : "memory", "cc", "lr" \
+ ); \
+ _arg1; \
+})
+
+#define my_syscall1(num, arg1) \
+({ \
+ register long _num asm("r7") = (num); \
+ register long _arg1 asm("r0") = (long)(arg1); \
+ \
+ asm volatile ( \
+ "svc #0\n" \
+ : "=r"(_arg1) \
+ : "r"(_arg1), \
+ "r"(_num) \
+ : "memory", "cc", "lr" \
+ ); \
+ _arg1; \
+})
+
+#define my_syscall2(num, arg1, arg2) \
+({ \
+ register long _num asm("r7") = (num); \
+ register long _arg1 asm("r0") = (long)(arg1); \
+ register long _arg2 asm("r1") = (long)(arg2); \
+ \
+ asm volatile ( \
+ "svc #0\n" \
+ : "=r"(_arg1) \
+ : "r"(_arg1), "r"(_arg2), \
+ "r"(_num) \
+ : "memory", "cc", "lr" \
+ ); \
+ _arg1; \
+})
+
+#define my_syscall3(num, arg1, arg2, arg3) \
+({ \
+ register long _num asm("r7") = (num); \
+ register long _arg1 asm("r0") = (long)(arg1); \
+ register long _arg2 asm("r1") = (long)(arg2); \
+ register long _arg3 asm("r2") = (long)(arg3); \
+ \
+ asm volatile ( \
+ "svc #0\n" \
+ : "=r"(_arg1) \
+ : "r"(_arg1), "r"(_arg2), "r"(_arg3), \
+ "r"(_num) \
+ : "memory", "cc", "lr" \
+ ); \
+ _arg1; \
+})
+
+#define my_syscall4(num, arg1, arg2, arg3, arg4) \
+({ \
+ register long _num asm("r7") = (num); \
+ register long _arg1 asm("r0") = (long)(arg1); \
+ register long _arg2 asm("r1") = (long)(arg2); \
+ register long _arg3 asm("r2") = (long)(arg3); \
+ register long _arg4 asm("r3") = (long)(arg4); \
+ \
+ asm volatile ( \
+ "svc #0\n" \
+ : "=r"(_arg1) \
+ : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), \
+ "r"(_num) \
+ : "memory", "cc", "lr" \
+ ); \
+ _arg1; \
+})
+
+#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \
+({ \
+ register long _num asm("r7") = (num); \
+ register long _arg1 asm("r0") = (long)(arg1); \
+ register long _arg2 asm("r1") = (long)(arg2); \
+ register long _arg3 asm("r2") = (long)(arg3); \
+ register long _arg4 asm("r3") = (long)(arg4); \
+ register long _arg5 asm("r4") = (long)(arg5); \
+ \
+ asm volatile ( \
+ "svc #0\n" \
+ : "=r" (_arg1) \
+ : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
+ "r"(_num) \
+ : "memory", "cc", "lr" \
+ ); \
+ _arg1; \
+})
+
+/* startup code */
+asm(".section .text\n"
+ ".weak _start\n"
+ "_start:\n"
+#if defined(__THUMBEB__) || defined(__THUMBEL__)
+ /* We enter here in 32-bit mode but if some previous functions were in
+ * 16-bit mode, the assembler cannot know, so we need to tell it we're in
+ * 32-bit now, then switch to 16-bit (is there a better way to do it than
+ * adding 1 by hand ?) and tell the asm we're now in 16-bit mode so that
+ * it generates correct instructions. Note that we do not support thumb1.
+ */
+ ".code 32\n"
+ "add r0, pc, #1\n"
+ "bx r0\n"
+ ".code 16\n"
+#endif
+ "pop {%r0}\n" // argc was in the stack
+ "mov %r1, %sp\n" // argv = sp
+ "add %r2, %r1, %r0, lsl #2\n" // envp = argv + 4*argc ...
+ "add %r2, %r2, $4\n" // ... + 4
+ "and %r3, %r1, $-8\n" // AAPCS : sp must be 8-byte aligned in the
+ "mov %sp, %r3\n" // callee, an bl doesn't push (lr=pc)
+ "bl main\n" // main() returns the status code, we'll exit with it.
+ "movs r7, $1\n" // NR_exit == 1
+ "svc $0x00\n"
+ "");
+
+#endif // _NOLIBC_ARCH_ARM_H
diff --git a/tools/include/nolibc/arch-i386.h b/tools/include/nolibc/arch-i386.h
new file mode 100644
index 000000000000..125a691fc631
--- /dev/null
+++ b/tools/include/nolibc/arch-i386.h
@@ -0,0 +1,196 @@
+/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
+/*
+ * i386 specific definitions for NOLIBC
+ * Copyright (C) 2017-2022 Willy Tarreau <w@1wt.eu>
+ */
+
+#ifndef _NOLIBC_ARCH_I386_H
+#define _NOLIBC_ARCH_I386_H
+
+/* O_* macros for fcntl/open are architecture-specific */
+#define O_RDONLY 0
+#define O_WRONLY 1
+#define O_RDWR 2
+#define O_CREAT 0x40
+#define O_EXCL 0x80
+#define O_NOCTTY 0x100
+#define O_TRUNC 0x200
+#define O_APPEND 0x400
+#define O_NONBLOCK 0x800
+#define O_DIRECTORY 0x10000
+
+/* The struct returned by the stat() syscall, 32-bit only, the syscall returns
+ * exactly 56 bytes (stops before the unused array).
+ */
+struct sys_stat_struct {
+ unsigned long st_dev;
+ unsigned long st_ino;
+ unsigned short st_mode;
+ unsigned short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+
+ unsigned long st_rdev;
+ unsigned long st_size;
+ unsigned long st_blksize;
+ unsigned long st_blocks;
+
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+ unsigned long st_mtime;
+ unsigned long st_mtime_nsec;
+
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+ unsigned long __unused[2];
+};
+
+/* Syscalls for i386 :
+ * - mostly similar to x86_64
+ * - registers are 32-bit
+ * - syscall number is passed in eax
+ * - arguments are in ebx, ecx, edx, esi, edi, ebp respectively
+ * - all registers are preserved (except eax of course)
+ * - the system call is performed by calling int $0x80
+ * - syscall return comes in eax
+ * - the arguments are cast to long and assigned into the target registers
+ * which are then simply passed as registers to the asm code, so that we
+ * don't have to experience issues with register constraints.
+ * - the syscall number is always specified last in order to allow to force
+ * some registers before (gcc refuses a %-register at the last position).
+ *
+ * Also, i386 supports the old_select syscall if newselect is not available
+ */
+#define __ARCH_WANT_SYS_OLD_SELECT
+
+#define my_syscall0(num) \
+({ \
+ long _ret; \
+ register long _num asm("eax") = (num); \
+ \
+ asm volatile ( \
+ "int $0x80\n" \
+ : "=a" (_ret) \
+ : "0"(_num) \
+ : "memory", "cc" \
+ ); \
+ _ret; \
+})
+
+#define my_syscall1(num, arg1) \
+({ \
+ long _ret; \
+ register long _num asm("eax") = (num); \
+ register long _arg1 asm("ebx") = (long)(arg1); \
+ \
+ asm volatile ( \
+ "int $0x80\n" \
+ : "=a" (_ret) \
+ : "r"(_arg1), \
+ "0"(_num) \
+ : "memory", "cc" \
+ ); \
+ _ret; \
+})
+
+#define my_syscall2(num, arg1, arg2) \
+({ \
+ long _ret; \
+ register long _num asm("eax") = (num); \
+ register long _arg1 asm("ebx") = (long)(arg1); \
+ register long _arg2 asm("ecx") = (long)(arg2); \
+ \
+ asm volatile ( \
+ "int $0x80\n" \
+ : "=a" (_ret) \
+ : "r"(_arg1), "r"(_arg2), \
+ "0"(_num) \
+ : "memory", "cc" \
+ ); \
+ _ret; \
+})
+
+#define my_syscall3(num, arg1, arg2, arg3) \
+({ \
+ long _ret; \
+ register long _num asm("eax") = (num); \
+ register long _arg1 asm("ebx") = (long)(arg1); \
+ register long _arg2 asm("ecx") = (long)(arg2); \
+ register long _arg3 asm("edx") = (long)(arg3); \
+ \
+ asm volatile ( \
+ "int $0x80\n" \
+ : "=a" (_ret) \
+ : "r"(_arg1), "r"(_arg2), "r"(_arg3), \
+ "0"(_num) \
+ : "memory", "cc" \
+ ); \
+ _ret; \
+})
+
+#define my_syscall4(num, arg1, arg2, arg3, arg4) \
+({ \
+ long _ret; \
+ register long _num asm("eax") = (num); \
+ register long _arg1 asm("ebx") = (long)(arg1); \
+ register long _arg2 asm("ecx") = (long)(arg2); \
+ register long _arg3 asm("edx") = (long)(arg3); \
+ register long _arg4 asm("esi") = (long)(arg4); \
+ \
+ asm volatile ( \
+ "int $0x80\n" \
+ : "=a" (_ret) \
+ : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), \
+ "0"(_num) \
+ : "memory", "cc" \
+ ); \
+ _ret; \
+})
+
+#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \
+({ \
+ long _ret; \
+ register long _num asm("eax") = (num); \
+ register long _arg1 asm("ebx") = (long)(arg1); \
+ register long _arg2 asm("ecx") = (long)(arg2); \
+ register long _arg3 asm("edx") = (long)(arg3); \
+ register long _arg4 asm("esi") = (long)(arg4); \
+ register long _arg5 asm("edi") = (long)(arg5); \
+ \
+ asm volatile ( \
+ "int $0x80\n" \
+ : "=a" (_ret) \
+ : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
+ "0"(_num) \
+ : "memory", "cc" \
+ ); \
+ _ret; \
+})
+
+/* startup code */
+/*
+ * i386 System V ABI mandates:
+ * 1) last pushed argument must be 16-byte aligned.
+ * 2) The deepest stack frame should be set to zero
+ *
+ */
+asm(".section .text\n"
+ ".weak _start\n"
+ "_start:\n"
+ "pop %eax\n" // argc (first arg, %eax)
+ "mov %esp, %ebx\n" // argv[] (second arg, %ebx)
+ "lea 4(%ebx,%eax,4),%ecx\n" // then a NULL then envp (third arg, %ecx)
+ "xor %ebp, %ebp\n" // zero the stack frame
+ "and $-16, %esp\n" // x86 ABI : esp must be 16-byte aligned before
+ "sub $4, %esp\n" // the call instruction (args are aligned)
+ "push %ecx\n" // push all registers on the stack so that we
+ "push %ebx\n" // support both regparm and plain stack modes
+ "push %eax\n"
+ "call main\n" // main() returns the status code in %eax
+ "mov %eax, %ebx\n" // retrieve exit code (32-bit int)
+ "movl $1, %eax\n" // NR_exit == 1
+ "int $0x80\n" // exit now
+ "hlt\n" // ensure it does not
+ "");
+
+#endif // _NOLIBC_ARCH_I386_H
diff --git a/tools/include/nolibc/arch-mips.h b/tools/include/nolibc/arch-mips.h
new file mode 100644
index 000000000000..5d647afa42e6
--- /dev/null
+++ b/tools/include/nolibc/arch-mips.h
@@ -0,0 +1,217 @@
+/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
+/*
+ * MIPS specific definitions for NOLIBC
+ * Copyright (C) 2017-2022 Willy Tarreau <w@1wt.eu>
+ */
+
+#ifndef _NOLIBC_ARCH_MIPS_H
+#define _NOLIBC_ARCH_MIPS_H
+
+/* O_* macros for fcntl/open are architecture-specific */
+#define O_RDONLY 0
+#define O_WRONLY 1
+#define O_RDWR 2
+#define O_APPEND 0x0008
+#define O_NONBLOCK 0x0080
+#define O_CREAT 0x0100
+#define O_TRUNC 0x0200
+#define O_EXCL 0x0400
+#define O_NOCTTY 0x0800
+#define O_DIRECTORY 0x10000
+
+/* The struct returned by the stat() syscall. 88 bytes are returned by the
+ * syscall.
+ */
+struct sys_stat_struct {
+ unsigned int st_dev;
+ long st_pad1[3];
+ unsigned long st_ino;
+ unsigned int st_mode;
+ unsigned int st_nlink;
+ unsigned int st_uid;
+ unsigned int st_gid;
+ unsigned int st_rdev;
+ long st_pad2[2];
+ long st_size;
+ long st_pad3;
+
+ long st_atime;
+ long st_atime_nsec;
+ long st_mtime;
+ long st_mtime_nsec;
+
+ long st_ctime;
+ long st_ctime_nsec;
+ long st_blksize;
+ long st_blocks;
+ long st_pad4[14];
+};
+
+/* Syscalls for MIPS ABI O32 :
+ * - WARNING! there's always a delayed slot!
+ * - WARNING again, the syntax is different, registers take a '$' and numbers
+ * do not.
+ * - registers are 32-bit
+ * - stack is 8-byte aligned
+ * - syscall number is passed in v0 (starts at 0xfa0).
+ * - arguments are in a0, a1, a2, a3, then the stack. The caller needs to
+ * leave some room in the stack for the callee to save a0..a3 if needed.
+ * - Many registers are clobbered, in fact only a0..a2 and s0..s8 are
+ * preserved. See: https://www.linux-mips.org/wiki/Syscall as well as
+ * scall32-o32.S in the kernel sources.
+ * - the system call is performed by calling "syscall"
+ * - syscall return comes in v0, and register a3 needs to be checked to know
+ * if an error occurred, in which case errno is in v0.
+ * - the arguments are cast to long and assigned into the target registers
+ * which are then simply passed as registers to the asm code, so that we
+ * don't have to experience issues with register constraints.
+ */
+
+#define my_syscall0(num) \
+({ \
+ register long _num asm("v0") = (num); \
+ register long _arg4 asm("a3"); \
+ \
+ asm volatile ( \
+ "addiu $sp, $sp, -32\n" \
+ "syscall\n" \
+ "addiu $sp, $sp, 32\n" \
+ : "=r"(_num), "=r"(_arg4) \
+ : "r"(_num) \
+ : "memory", "cc", "at", "v1", "hi", "lo", \
+ "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \
+ ); \
+ _arg4 ? -_num : _num; \
+})
+
+#define my_syscall1(num, arg1) \
+({ \
+ register long _num asm("v0") = (num); \
+ register long _arg1 asm("a0") = (long)(arg1); \
+ register long _arg4 asm("a3"); \
+ \
+ asm volatile ( \
+ "addiu $sp, $sp, -32\n" \
+ "syscall\n" \
+ "addiu $sp, $sp, 32\n" \
+ : "=r"(_num), "=r"(_arg4) \
+ : "0"(_num), \
+ "r"(_arg1) \
+ : "memory", "cc", "at", "v1", "hi", "lo", \
+ "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \
+ ); \
+ _arg4 ? -_num : _num; \
+})
+
+#define my_syscall2(num, arg1, arg2) \
+({ \
+ register long _num asm("v0") = (num); \
+ register long _arg1 asm("a0") = (long)(arg1); \
+ register long _arg2 asm("a1") = (long)(arg2); \
+ register long _arg4 asm("a3"); \
+ \
+ asm volatile ( \
+ "addiu $sp, $sp, -32\n" \
+ "syscall\n" \
+ "addiu $sp, $sp, 32\n" \
+ : "=r"(_num), "=r"(_arg4) \
+ : "0"(_num), \
+ "r"(_arg1), "r"(_arg2) \
+ : "memory", "cc", "at", "v1", "hi", "lo", \
+ "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \
+ ); \
+ _arg4 ? -_num : _num; \
+})
+
+#define my_syscall3(num, arg1, arg2, arg3) \
+({ \
+ register long _num asm("v0") = (num); \
+ register long _arg1 asm("a0") = (long)(arg1); \
+ register long _arg2 asm("a1") = (long)(arg2); \
+ register long _arg3 asm("a2") = (long)(arg3); \
+ register long _arg4 asm("a3"); \
+ \
+ asm volatile ( \
+ "addiu $sp, $sp, -32\n" \
+ "syscall\n" \
+ "addiu $sp, $sp, 32\n" \
+ : "=r"(_num), "=r"(_arg4) \
+ : "0"(_num), \
+ "r"(_arg1), "r"(_arg2), "r"(_arg3) \
+ : "memory", "cc", "at", "v1", "hi", "lo", \
+ "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \
+ ); \
+ _arg4 ? -_num : _num; \
+})
+
+#define my_syscall4(num, arg1, arg2, arg3, arg4) \
+({ \
+ register long _num asm("v0") = (num); \
+ register long _arg1 asm("a0") = (long)(arg1); \
+ register long _arg2 asm("a1") = (long)(arg2); \
+ register long _arg3 asm("a2") = (long)(arg3); \
+ register long _arg4 asm("a3") = (long)(arg4); \
+ \
+ asm volatile ( \
+ "addiu $sp, $sp, -32\n" \
+ "syscall\n" \
+ "addiu $sp, $sp, 32\n" \
+ : "=r" (_num), "=r"(_arg4) \
+ : "0"(_num), \
+ "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4) \
+ : "memory", "cc", "at", "v1", "hi", "lo", \
+ "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \
+ ); \
+ _arg4 ? -_num : _num; \
+})
+
+#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \
+({ \
+ register long _num asm("v0") = (num); \
+ register long _arg1 asm("a0") = (long)(arg1); \
+ register long _arg2 asm("a1") = (long)(arg2); \
+ register long _arg3 asm("a2") = (long)(arg3); \
+ register long _arg4 asm("a3") = (long)(arg4); \
+ register long _arg5 = (long)(arg5); \
+ \
+ asm volatile ( \
+ "addiu $sp, $sp, -32\n" \
+ "sw %7, 16($sp)\n" \
+ "syscall\n " \
+ "addiu $sp, $sp, 32\n" \
+ : "=r" (_num), "=r"(_arg4) \
+ : "0"(_num), \
+ "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5) \
+ : "memory", "cc", "at", "v1", "hi", "lo", \
+ "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \
+ ); \
+ _arg4 ? -_num : _num; \
+})
+
+/* startup code, note that it's called __start on MIPS */
+asm(".section .text\n"
+ ".weak __start\n"
+ ".set nomips16\n"
+ ".set push\n"
+ ".set noreorder\n"
+ ".option pic0\n"
+ ".ent __start\n"
+ "__start:\n"
+ "lw $a0,($sp)\n" // argc was in the stack
+ "addiu $a1, $sp, 4\n" // argv = sp + 4
+ "sll $a2, $a0, 2\n" // a2 = argc * 4
+ "add $a2, $a2, $a1\n" // envp = argv + 4*argc ...
+ "addiu $a2, $a2, 4\n" // ... + 4
+ "li $t0, -8\n"
+ "and $sp, $sp, $t0\n" // sp must be 8-byte aligned
+ "addiu $sp,$sp,-16\n" // the callee expects to save a0..a3 there!
+ "jal main\n" // main() returns the status code, we'll exit with it.
+ "nop\n" // delayed slot
+ "move $a0, $v0\n" // retrieve 32-bit exit code from v0
+ "li $v0, 4001\n" // NR_exit == 4001
+ "syscall\n"
+ ".end __start\n"
+ ".set pop\n"
+ "");
+
+#endif // _NOLIBC_ARCH_MIPS_H
diff --git a/tools/include/nolibc/arch-riscv.h b/tools/include/nolibc/arch-riscv.h
new file mode 100644
index 000000000000..8c0cb1abb29f
--- /dev/null
+++ b/tools/include/nolibc/arch-riscv.h
@@ -0,0 +1,204 @@
+/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
+/*
+ * RISCV (32 and 64) specific definitions for NOLIBC
+ * Copyright (C) 2017-2022 Willy Tarreau <w@1wt.eu>
+ */
+
+#ifndef _NOLIBC_ARCH_RISCV_H
+#define _NOLIBC_ARCH_RISCV_H
+
+/* O_* macros for fcntl/open are architecture-specific */
+#define O_RDONLY 0
+#define O_WRONLY 1
+#define O_RDWR 2
+#define O_CREAT 0x40
+#define O_EXCL 0x80
+#define O_NOCTTY 0x100
+#define O_TRUNC 0x200
+#define O_APPEND 0x400
+#define O_NONBLOCK 0x800
+#define O_DIRECTORY 0x10000
+
+struct sys_stat_struct {
+ unsigned long st_dev; /* Device. */
+ unsigned long st_ino; /* File serial number. */
+ unsigned int st_mode; /* File mode. */
+ unsigned int st_nlink; /* Link count. */
+ unsigned int st_uid; /* User ID of the file's owner. */
+ unsigned int st_gid; /* Group ID of the file's group. */
+ unsigned long st_rdev; /* Device number, if device. */
+ unsigned long __pad1;
+ long st_size; /* Size of file, in bytes. */
+ int st_blksize; /* Optimal block size for I/O. */
+ int __pad2;
+ long st_blocks; /* Number 512-byte blocks allocated. */
+ long st_atime; /* Time of last access. */
+ unsigned long st_atime_nsec;
+ long st_mtime; /* Time of last modification. */
+ unsigned long st_mtime_nsec;
+ long st_ctime; /* Time of last status change. */
+ unsigned long st_ctime_nsec;
+ unsigned int __unused4;
+ unsigned int __unused5;
+};
+
+#if __riscv_xlen == 64
+#define PTRLOG "3"
+#define SZREG "8"
+#elif __riscv_xlen == 32
+#define PTRLOG "2"
+#define SZREG "4"
+#endif
+
+/* Syscalls for RISCV :
+ * - stack is 16-byte aligned
+ * - syscall number is passed in a7
+ * - arguments are in a0, a1, a2, a3, a4, a5
+ * - the system call is performed by calling ecall
+ * - syscall return comes in a0
+ * - the arguments are cast to long and assigned into the target
+ * registers which are then simply passed as registers to the asm code,
+ * so that we don't have to experience issues with register constraints.
+ *
+ * On riscv, select() is not implemented so we have to use pselect6().
+ */
+#define __ARCH_WANT_SYS_PSELECT6
+
+#define my_syscall0(num) \
+({ \
+ register long _num asm("a7") = (num); \
+ register long _arg1 asm("a0"); \
+ \
+ asm volatile ( \
+ "ecall\n\t" \
+ : "=r"(_arg1) \
+ : "r"(_num) \
+ : "memory", "cc" \
+ ); \
+ _arg1; \
+})
+
+#define my_syscall1(num, arg1) \
+({ \
+ register long _num asm("a7") = (num); \
+ register long _arg1 asm("a0") = (long)(arg1); \
+ \
+ asm volatile ( \
+ "ecall\n" \
+ : "+r"(_arg1) \
+ : "r"(_num) \
+ : "memory", "cc" \
+ ); \
+ _arg1; \
+})
+
+#define my_syscall2(num, arg1, arg2) \
+({ \
+ register long _num asm("a7") = (num); \
+ register long _arg1 asm("a0") = (long)(arg1); \
+ register long _arg2 asm("a1") = (long)(arg2); \
+ \
+ asm volatile ( \
+ "ecall\n" \
+ : "+r"(_arg1) \
+ : "r"(_arg2), \
+ "r"(_num) \
+ : "memory", "cc" \
+ ); \
+ _arg1; \
+})
+
+#define my_syscall3(num, arg1, arg2, arg3) \
+({ \
+ register long _num asm("a7") = (num); \
+ register long _arg1 asm("a0") = (long)(arg1); \
+ register long _arg2 asm("a1") = (long)(arg2); \
+ register long _arg3 asm("a2") = (long)(arg3); \
+ \
+ asm volatile ( \
+ "ecall\n\t" \
+ : "+r"(_arg1) \
+ : "r"(_arg2), "r"(_arg3), \
+ "r"(_num) \
+ : "memory", "cc" \
+ ); \
+ _arg1; \
+})
+
+#define my_syscall4(num, arg1, arg2, arg3, arg4) \
+({ \
+ register long _num asm("a7") = (num); \
+ register long _arg1 asm("a0") = (long)(arg1); \
+ register long _arg2 asm("a1") = (long)(arg2); \
+ register long _arg3 asm("a2") = (long)(arg3); \
+ register long _arg4 asm("a3") = (long)(arg4); \
+ \
+ asm volatile ( \
+ "ecall\n" \
+ : "+r"(_arg1) \
+ : "r"(_arg2), "r"(_arg3), "r"(_arg4), \
+ "r"(_num) \
+ : "memory", "cc" \
+ ); \
+ _arg1; \
+})
+
+#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \
+({ \
+ register long _num asm("a7") = (num); \
+ register long _arg1 asm("a0") = (long)(arg1); \
+ register long _arg2 asm("a1") = (long)(arg2); \
+ register long _arg3 asm("a2") = (long)(arg3); \
+ register long _arg4 asm("a3") = (long)(arg4); \
+ register long _arg5 asm("a4") = (long)(arg5); \
+ \
+ asm volatile ( \
+ "ecall\n" \
+ : "+r"(_arg1) \
+ : "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
+ "r"(_num) \
+ : "memory", "cc" \
+ ); \
+ _arg1; \
+})
+
+#define my_syscall6(num, arg1, arg2, arg3, arg4, arg5, arg6) \
+({ \
+ register long _num asm("a7") = (num); \
+ register long _arg1 asm("a0") = (long)(arg1); \
+ register long _arg2 asm("a1") = (long)(arg2); \
+ register long _arg3 asm("a2") = (long)(arg3); \
+ register long _arg4 asm("a3") = (long)(arg4); \
+ register long _arg5 asm("a4") = (long)(arg5); \
+ register long _arg6 asm("a5") = (long)(arg6); \
+ \
+ asm volatile ( \
+ "ecall\n" \
+ : "+r"(_arg1) \
+ : "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), "r"(_arg6), \
+ "r"(_num) \
+ : "memory", "cc" \
+ ); \
+ _arg1; \
+})
+
+/* startup code */
+asm(".section .text\n"
+ ".weak _start\n"
+ "_start:\n"
+ ".option push\n"
+ ".option norelax\n"
+ "lla gp, __global_pointer$\n"
+ ".option pop\n"
+ "ld a0, 0(sp)\n" // argc (a0) was in the stack
+ "add a1, sp, "SZREG"\n" // argv (a1) = sp
+ "slli a2, a0, "PTRLOG"\n" // envp (a2) = SZREG*argc ...
+ "add a2, a2, "SZREG"\n" // + SZREG (skip null)
+ "add a2,a2,a1\n" // + argv
+ "andi sp,a1,-16\n" // sp must be 16-byte aligned
+ "call main\n" // main() returns the status code, we'll exit with it.
+ "li a7, 93\n" // NR_exit == 93
+ "ecall\n"
+ "");
+
+#endif // _NOLIBC_ARCH_RISCV_H
diff --git a/tools/include/nolibc/arch-x86_64.h b/tools/include/nolibc/arch-x86_64.h
new file mode 100644
index 000000000000..b1af63ce1cb0
--- /dev/null
+++ b/tools/include/nolibc/arch-x86_64.h
@@ -0,0 +1,215 @@
+/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
+/*
+ * x86_64 specific definitions for NOLIBC
+ * Copyright (C) 2017-2022 Willy Tarreau <w@1wt.eu>
+ */
+
+#ifndef _NOLIBC_ARCH_X86_64_H
+#define _NOLIBC_ARCH_X86_64_H
+
+/* O_* macros for fcntl/open are architecture-specific */
+#define O_RDONLY 0
+#define O_WRONLY 1
+#define O_RDWR 2
+#define O_CREAT 0x40
+#define O_EXCL 0x80
+#define O_NOCTTY 0x100
+#define O_TRUNC 0x200
+#define O_APPEND 0x400
+#define O_NONBLOCK 0x800
+#define O_DIRECTORY 0x10000
+
+/* The struct returned by the stat() syscall, equivalent to stat64(). The
+ * syscall returns 116 bytes and stops in the middle of __unused.
+ */
+struct sys_stat_struct {
+ unsigned long st_dev;
+ unsigned long st_ino;
+ unsigned long st_nlink;
+ unsigned int st_mode;
+ unsigned int st_uid;
+
+ unsigned int st_gid;
+ unsigned int __pad0;
+ unsigned long st_rdev;
+ long st_size;
+ long st_blksize;
+
+ long st_blocks;
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+ unsigned long st_mtime;
+
+ unsigned long st_mtime_nsec;
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+ long __unused[3];
+};
+
+/* Syscalls for x86_64 :
+ * - registers are 64-bit
+ * - syscall number is passed in rax
+ * - arguments are in rdi, rsi, rdx, r10, r8, r9 respectively
+ * - the system call is performed by calling the syscall instruction
+ * - syscall return comes in rax
+ * - rcx and r11 are clobbered, others are preserved.
+ * - the arguments are cast to long and assigned into the target registers
+ * which are then simply passed as registers to the asm code, so that we
+ * don't have to experience issues with register constraints.
+ * - the syscall number is always specified last in order to allow to force
+ * some registers before (gcc refuses a %-register at the last position).
+ * - see also x86-64 ABI section A.2 AMD64 Linux Kernel Conventions, A.2.1
+ * Calling Conventions.
+ *
+ * Link x86-64 ABI: https://gitlab.com/x86-psABIs/x86-64-ABI/-/wikis/x86-64-psABI
+ *
+ */
+
+#define my_syscall0(num) \
+({ \
+ long _ret; \
+ register long _num asm("rax") = (num); \
+ \
+ asm volatile ( \
+ "syscall\n" \
+ : "=a"(_ret) \
+ : "0"(_num) \
+ : "rcx", "r11", "memory", "cc" \
+ ); \
+ _ret; \
+})
+
+#define my_syscall1(num, arg1) \
+({ \
+ long _ret; \
+ register long _num asm("rax") = (num); \
+ register long _arg1 asm("rdi") = (long)(arg1); \
+ \
+ asm volatile ( \
+ "syscall\n" \
+ : "=a"(_ret) \
+ : "r"(_arg1), \
+ "0"(_num) \
+ : "rcx", "r11", "memory", "cc" \
+ ); \
+ _ret; \
+})
+
+#define my_syscall2(num, arg1, arg2) \
+({ \
+ long _ret; \
+ register long _num asm("rax") = (num); \
+ register long _arg1 asm("rdi") = (long)(arg1); \
+ register long _arg2 asm("rsi") = (long)(arg2); \
+ \
+ asm volatile ( \
+ "syscall\n" \
+ : "=a"(_ret) \
+ : "r"(_arg1), "r"(_arg2), \
+ "0"(_num) \
+ : "rcx", "r11", "memory", "cc" \
+ ); \
+ _ret; \
+})
+
+#define my_syscall3(num, arg1, arg2, arg3) \
+({ \
+ long _ret; \
+ register long _num asm("rax") = (num); \
+ register long _arg1 asm("rdi") = (long)(arg1); \
+ register long _arg2 asm("rsi") = (long)(arg2); \
+ register long _arg3 asm("rdx") = (long)(arg3); \
+ \
+ asm volatile ( \
+ "syscall\n" \
+ : "=a"(_ret) \
+ : "r"(_arg1), "r"(_arg2), "r"(_arg3), \
+ "0"(_num) \
+ : "rcx", "r11", "memory", "cc" \
+ ); \
+ _ret; \
+})
+
+#define my_syscall4(num, arg1, arg2, arg3, arg4) \
+({ \
+ long _ret; \
+ register long _num asm("rax") = (num); \
+ register long _arg1 asm("rdi") = (long)(arg1); \
+ register long _arg2 asm("rsi") = (long)(arg2); \
+ register long _arg3 asm("rdx") = (long)(arg3); \
+ register long _arg4 asm("r10") = (long)(arg4); \
+ \
+ asm volatile ( \
+ "syscall\n" \
+ : "=a"(_ret) \
+ : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), \
+ "0"(_num) \
+ : "rcx", "r11", "memory", "cc" \
+ ); \
+ _ret; \
+})
+
+#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \
+({ \
+ long _ret; \
+ register long _num asm("rax") = (num); \
+ register long _arg1 asm("rdi") = (long)(arg1); \
+ register long _arg2 asm("rsi") = (long)(arg2); \
+ register long _arg3 asm("rdx") = (long)(arg3); \
+ register long _arg4 asm("r10") = (long)(arg4); \
+ register long _arg5 asm("r8") = (long)(arg5); \
+ \
+ asm volatile ( \
+ "syscall\n" \
+ : "=a"(_ret) \
+ : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
+ "0"(_num) \
+ : "rcx", "r11", "memory", "cc" \
+ ); \
+ _ret; \
+})
+
+#define my_syscall6(num, arg1, arg2, arg3, arg4, arg5, arg6) \
+({ \
+ long _ret; \
+ register long _num asm("rax") = (num); \
+ register long _arg1 asm("rdi") = (long)(arg1); \
+ register long _arg2 asm("rsi") = (long)(arg2); \
+ register long _arg3 asm("rdx") = (long)(arg3); \
+ register long _arg4 asm("r10") = (long)(arg4); \
+ register long _arg5 asm("r8") = (long)(arg5); \
+ register long _arg6 asm("r9") = (long)(arg6); \
+ \
+ asm volatile ( \
+ "syscall\n" \
+ : "=a"(_ret) \
+ : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
+ "r"(_arg6), "0"(_num) \
+ : "rcx", "r11", "memory", "cc" \
+ ); \
+ _ret; \
+})
+
+/* startup code */
+/*
+ * x86-64 System V ABI mandates:
+ * 1) %rsp must be 16-byte aligned right before the function call.
+ * 2) The deepest stack frame should be zero (the %rbp).
+ *
+ */
+asm(".section .text\n"
+ ".weak _start\n"
+ "_start:\n"
+ "pop %rdi\n" // argc (first arg, %rdi)
+ "mov %rsp, %rsi\n" // argv[] (second arg, %rsi)
+ "lea 8(%rsi,%rdi,8),%rdx\n" // then a NULL then envp (third arg, %rdx)
+ "xor %ebp, %ebp\n" // zero the stack frame
+ "and $-16, %rsp\n" // x86 ABI : esp must be 16-byte aligned before call
+ "call main\n" // main() returns the status code, we'll exit with it.
+ "mov %eax, %edi\n" // retrieve exit code (32 bit)
+ "mov $60, %eax\n" // NR_exit == 60
+ "syscall\n" // really exit
+ "hlt\n" // ensure it does not return
+ "");
+
+#endif // _NOLIBC_ARCH_X86_64_H
diff --git a/tools/include/nolibc/arch.h b/tools/include/nolibc/arch.h
new file mode 100644
index 000000000000..4c6992321b0d
--- /dev/null
+++ b/tools/include/nolibc/arch.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
+/*
+ * Copyright (C) 2017-2022 Willy Tarreau <w@1wt.eu>
+ */
+
+/* Below comes the architecture-specific code. For each architecture, we have
+ * the syscall declarations and the _start code definition. This is the only
+ * global part. On all architectures the kernel puts everything in the stack
+ * before jumping to _start just above us, without any return address (_start
+ * is not a function but an entry pint). So at the stack pointer we find argc.
+ * Then argv[] begins, and ends at the first NULL. Then we have envp which
+ * starts and ends with a NULL as well. So envp=argv+argc+1.
+ */
+
+#ifndef _NOLIBC_ARCH_H
+#define _NOLIBC_ARCH_H
+
+#if defined(__x86_64__)
+#include "arch-x86_64.h"
+#elif defined(__i386__) || defined(__i486__) || defined(__i586__) || defined(__i686__)
+#include "arch-i386.h"
+#elif defined(__ARM_EABI__)
+#include "arch-arm.h"
+#elif defined(__aarch64__)
+#include "arch-aarch64.h"
+#elif defined(__mips__) && defined(_ABIO32)
+#include "arch-mips.h"
+#elif defined(__riscv)
+#include "arch-riscv.h"
+#endif
+
+#endif /* _NOLIBC_ARCH_H */
diff --git a/tools/include/nolibc/nolibc.h b/tools/include/nolibc/nolibc.h
index d64020c1922c..d272b721dc51 100644
--- a/tools/include/nolibc/nolibc.h
+++ b/tools/include/nolibc/nolibc.h
@@ -81,13 +81,21 @@
*
*/

+/* standard type definitions */
+#include "std.h"
+
+/* system includes */
#include <asm/unistd.h>
+#include <asm/signal.h> // for SIGCHLD
#include <asm/ioctls.h>
#include <asm/errno.h>
#include <linux/fs.h>
#include <linux/loop.h>
#include <linux/time.h>
+#include "arch.h"
+#include "types.h"

+/* Used by programs to avoid std includes */
#define NOLIBC

/* this way it will be removed if unused */
@@ -104,1329 +112,6 @@ static int errno;
*/
#define MAX_ERRNO 4095

-/* Declare a few quite common macros and types that usually are in stdlib.h,
- * stdint.h, ctype.h, unistd.h and a few other common locations.
- */
-
-#define NULL ((void *)0)
-
-/* stdint types */
-typedef unsigned char uint8_t;
-typedef signed char int8_t;
-typedef unsigned short uint16_t;
-typedef signed short int16_t;
-typedef unsigned int uint32_t;
-typedef signed int int32_t;
-typedef unsigned long long uint64_t;
-typedef signed long long int64_t;
-typedef unsigned long size_t;
-typedef signed long ssize_t;
-typedef unsigned long uintptr_t;
-typedef signed long intptr_t;
-typedef signed long ptrdiff_t;
-
-/* for stat() */
-typedef unsigned int dev_t;
-typedef unsigned long ino_t;
-typedef unsigned int mode_t;
-typedef signed int pid_t;
-typedef unsigned int uid_t;
-typedef unsigned int gid_t;
-typedef unsigned long nlink_t;
-typedef signed long off_t;
-typedef signed long blksize_t;
-typedef signed long blkcnt_t;
-typedef signed long time_t;
-
-/* for poll() */
-struct pollfd {
- int fd;
- short int events;
- short int revents;
-};
-
-/* for getdents64() */
-struct linux_dirent64 {
- uint64_t d_ino;
- int64_t d_off;
- unsigned short d_reclen;
- unsigned char d_type;
- char d_name[];
-};
-
-/* commonly an fd_set represents 256 FDs */
-#define FD_SETSIZE 256
-typedef struct { uint32_t fd32[FD_SETSIZE/32]; } fd_set;
-
-/* needed by wait4() */
-struct rusage {
- struct timeval ru_utime;
- struct timeval ru_stime;
- long ru_maxrss;
- long ru_ixrss;
- long ru_idrss;
- long ru_isrss;
- long ru_minflt;
- long ru_majflt;
- long ru_nswap;
- long ru_inblock;
- long ru_oublock;
- long ru_msgsnd;
- long ru_msgrcv;
- long ru_nsignals;
- long ru_nvcsw;
- long ru_nivcsw;
-};
-
-/* stat flags (WARNING, octal here) */
-#define S_IFDIR 0040000
-#define S_IFCHR 0020000
-#define S_IFBLK 0060000
-#define S_IFREG 0100000
-#define S_IFIFO 0010000
-#define S_IFLNK 0120000
-#define S_IFSOCK 0140000
-#define S_IFMT 0170000
-
-#define S_ISDIR(mode) (((mode) & S_IFDIR) == S_IFDIR)
-#define S_ISCHR(mode) (((mode) & S_IFCHR) == S_IFCHR)
-#define S_ISBLK(mode) (((mode) & S_IFBLK) == S_IFBLK)
-#define S_ISREG(mode) (((mode) & S_IFREG) == S_IFREG)
-#define S_ISFIFO(mode) (((mode) & S_IFIFO) == S_IFIFO)
-#define S_ISLNK(mode) (((mode) & S_IFLNK) == S_IFLNK)
-#define S_ISSOCK(mode) (((mode) & S_IFSOCK) == S_IFSOCK)
-
-#define DT_UNKNOWN 0
-#define DT_FIFO 1
-#define DT_CHR 2
-#define DT_DIR 4
-#define DT_BLK 6
-#define DT_REG 8
-#define DT_LNK 10
-#define DT_SOCK 12
-
-/* all the *at functions */
-#ifndef AT_FDCWD
-#define AT_FDCWD -100
-#endif
-
-/* lseek */
-#define SEEK_SET 0
-#define SEEK_CUR 1
-#define SEEK_END 2
-
-/* reboot */
-#define LINUX_REBOOT_MAGIC1 0xfee1dead
-#define LINUX_REBOOT_MAGIC2 0x28121969
-#define LINUX_REBOOT_CMD_HALT 0xcdef0123
-#define LINUX_REBOOT_CMD_POWER_OFF 0x4321fedc
-#define LINUX_REBOOT_CMD_RESTART 0x01234567
-#define LINUX_REBOOT_CMD_SW_SUSPEND 0xd000fce2
-
-
-/* The format of the struct as returned by the libc to the application, which
- * significantly differs from the format returned by the stat() syscall flavours.
- */
-struct stat {
- dev_t st_dev; /* ID of device containing file */
- ino_t st_ino; /* inode number */
- mode_t st_mode; /* protection */
- nlink_t st_nlink; /* number of hard links */
- uid_t st_uid; /* user ID of owner */
- gid_t st_gid; /* group ID of owner */
- dev_t st_rdev; /* device ID (if special file) */
- off_t st_size; /* total size, in bytes */
- blksize_t st_blksize; /* blocksize for file system I/O */
- blkcnt_t st_blocks; /* number of 512B blocks allocated */
- time_t st_atime; /* time of last access */
- time_t st_mtime; /* time of last modification */
- time_t st_ctime; /* time of last status change */
-};
-
-#define WEXITSTATUS(status) (((status) & 0xff00) >> 8)
-#define WIFEXITED(status) (((status) & 0x7f) == 0)
-
-/* for SIGCHLD */
-#include <asm/signal.h>
-
-/* Below comes the architecture-specific code. For each architecture, we have
- * the syscall declarations and the _start code definition. This is the only
- * global part. On all architectures the kernel puts everything in the stack
- * before jumping to _start just above us, without any return address (_start
- * is not a function but an entry pint). So at the stack pointer we find argc.
- * Then argv[] begins, and ends at the first NULL. Then we have envp which
- * starts and ends with a NULL as well. So envp=argv+argc+1.
- */
-
-#if defined(__x86_64__)
-/* Syscalls for x86_64 :
- * - registers are 64-bit
- * - syscall number is passed in rax
- * - arguments are in rdi, rsi, rdx, r10, r8, r9 respectively
- * - the system call is performed by calling the syscall instruction
- * - syscall return comes in rax
- * - rcx and r8..r11 may be clobbered, others are preserved.
- * - the arguments are cast to long and assigned into the target registers
- * which are then simply passed as registers to the asm code, so that we
- * don't have to experience issues with register constraints.
- * - the syscall number is always specified last in order to allow to force
- * some registers before (gcc refuses a %-register at the last position).
- */
-
-#define my_syscall0(num) \
-({ \
- long _ret; \
- register long _num asm("rax") = (num); \
- \
- asm volatile ( \
- "syscall\n" \
- : "=a" (_ret) \
- : "0"(_num) \
- : "rcx", "r8", "r9", "r10", "r11", "memory", "cc" \
- ); \
- _ret; \
-})
-
-#define my_syscall1(num, arg1) \
-({ \
- long _ret; \
- register long _num asm("rax") = (num); \
- register long _arg1 asm("rdi") = (long)(arg1); \
- \
- asm volatile ( \
- "syscall\n" \
- : "=a" (_ret) \
- : "r"(_arg1), \
- "0"(_num) \
- : "rcx", "r8", "r9", "r10", "r11", "memory", "cc" \
- ); \
- _ret; \
-})
-
-#define my_syscall2(num, arg1, arg2) \
-({ \
- long _ret; \
- register long _num asm("rax") = (num); \
- register long _arg1 asm("rdi") = (long)(arg1); \
- register long _arg2 asm("rsi") = (long)(arg2); \
- \
- asm volatile ( \
- "syscall\n" \
- : "=a" (_ret) \
- : "r"(_arg1), "r"(_arg2), \
- "0"(_num) \
- : "rcx", "r8", "r9", "r10", "r11", "memory", "cc" \
- ); \
- _ret; \
-})
-
-#define my_syscall3(num, arg1, arg2, arg3) \
-({ \
- long _ret; \
- register long _num asm("rax") = (num); \
- register long _arg1 asm("rdi") = (long)(arg1); \
- register long _arg2 asm("rsi") = (long)(arg2); \
- register long _arg3 asm("rdx") = (long)(arg3); \
- \
- asm volatile ( \
- "syscall\n" \
- : "=a" (_ret) \
- : "r"(_arg1), "r"(_arg2), "r"(_arg3), \
- "0"(_num) \
- : "rcx", "r8", "r9", "r10", "r11", "memory", "cc" \
- ); \
- _ret; \
-})
-
-#define my_syscall4(num, arg1, arg2, arg3, arg4) \
-({ \
- long _ret; \
- register long _num asm("rax") = (num); \
- register long _arg1 asm("rdi") = (long)(arg1); \
- register long _arg2 asm("rsi") = (long)(arg2); \
- register long _arg3 asm("rdx") = (long)(arg3); \
- register long _arg4 asm("r10") = (long)(arg4); \
- \
- asm volatile ( \
- "syscall\n" \
- : "=a" (_ret), "=r"(_arg4) \
- : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), \
- "0"(_num) \
- : "rcx", "r8", "r9", "r11", "memory", "cc" \
- ); \
- _ret; \
-})
-
-#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \
-({ \
- long _ret; \
- register long _num asm("rax") = (num); \
- register long _arg1 asm("rdi") = (long)(arg1); \
- register long _arg2 asm("rsi") = (long)(arg2); \
- register long _arg3 asm("rdx") = (long)(arg3); \
- register long _arg4 asm("r10") = (long)(arg4); \
- register long _arg5 asm("r8") = (long)(arg5); \
- \
- asm volatile ( \
- "syscall\n" \
- : "=a" (_ret), "=r"(_arg4), "=r"(_arg5) \
- : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
- "0"(_num) \
- : "rcx", "r9", "r11", "memory", "cc" \
- ); \
- _ret; \
-})
-
-#define my_syscall6(num, arg1, arg2, arg3, arg4, arg5, arg6) \
-({ \
- long _ret; \
- register long _num asm("rax") = (num); \
- register long _arg1 asm("rdi") = (long)(arg1); \
- register long _arg2 asm("rsi") = (long)(arg2); \
- register long _arg3 asm("rdx") = (long)(arg3); \
- register long _arg4 asm("r10") = (long)(arg4); \
- register long _arg5 asm("r8") = (long)(arg5); \
- register long _arg6 asm("r9") = (long)(arg6); \
- \
- asm volatile ( \
- "syscall\n" \
- : "=a" (_ret), "=r"(_arg4), "=r"(_arg5) \
- : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
- "r"(_arg6), "0"(_num) \
- : "rcx", "r11", "memory", "cc" \
- ); \
- _ret; \
-})
-
-/* startup code */
-/*
- * x86-64 System V ABI mandates:
- * 1) %rsp must be 16-byte aligned right before the function call.
- * 2) The deepest stack frame should be zero (the %rbp).
- *
- */
-asm(".section .text\n"
- ".global _start\n"
- "_start:\n"
- "pop %rdi\n" // argc (first arg, %rdi)
- "mov %rsp, %rsi\n" // argv[] (second arg, %rsi)
- "lea 8(%rsi,%rdi,8),%rdx\n" // then a NULL then envp (third arg, %rdx)
- "xor %ebp, %ebp\n" // zero the stack frame
- "and $-16, %rsp\n" // x86 ABI : esp must be 16-byte aligned before call
- "call main\n" // main() returns the status code, we'll exit with it.
- "mov %eax, %edi\n" // retrieve exit code (32 bit)
- "mov $60, %rax\n" // NR_exit == 60
- "syscall\n" // really exit
- "hlt\n" // ensure it does not return
- "");
-
-/* fcntl / open */
-#define O_RDONLY 0
-#define O_WRONLY 1
-#define O_RDWR 2
-#define O_CREAT 0x40
-#define O_EXCL 0x80
-#define O_NOCTTY 0x100
-#define O_TRUNC 0x200
-#define O_APPEND 0x400
-#define O_NONBLOCK 0x800
-#define O_DIRECTORY 0x10000
-
-/* The struct returned by the stat() syscall, equivalent to stat64(). The
- * syscall returns 116 bytes and stops in the middle of __unused.
- */
-struct sys_stat_struct {
- unsigned long st_dev;
- unsigned long st_ino;
- unsigned long st_nlink;
- unsigned int st_mode;
- unsigned int st_uid;
-
- unsigned int st_gid;
- unsigned int __pad0;
- unsigned long st_rdev;
- long st_size;
- long st_blksize;
-
- long st_blocks;
- unsigned long st_atime;
- unsigned long st_atime_nsec;
- unsigned long st_mtime;
-
- unsigned long st_mtime_nsec;
- unsigned long st_ctime;
- unsigned long st_ctime_nsec;
- long __unused[3];
-};
-
-#elif defined(__i386__) || defined(__i486__) || defined(__i586__) || defined(__i686__)
-/* Syscalls for i386 :
- * - mostly similar to x86_64
- * - registers are 32-bit
- * - syscall number is passed in eax
- * - arguments are in ebx, ecx, edx, esi, edi, ebp respectively
- * - all registers are preserved (except eax of course)
- * - the system call is performed by calling int $0x80
- * - syscall return comes in eax
- * - the arguments are cast to long and assigned into the target registers
- * which are then simply passed as registers to the asm code, so that we
- * don't have to experience issues with register constraints.
- * - the syscall number is always specified last in order to allow to force
- * some registers before (gcc refuses a %-register at the last position).
- *
- * Also, i386 supports the old_select syscall if newselect is not available
- */
-#define __ARCH_WANT_SYS_OLD_SELECT
-
-#define my_syscall0(num) \
-({ \
- long _ret; \
- register long _num asm("eax") = (num); \
- \
- asm volatile ( \
- "int $0x80\n" \
- : "=a" (_ret) \
- : "0"(_num) \
- : "memory", "cc" \
- ); \
- _ret; \
-})
-
-#define my_syscall1(num, arg1) \
-({ \
- long _ret; \
- register long _num asm("eax") = (num); \
- register long _arg1 asm("ebx") = (long)(arg1); \
- \
- asm volatile ( \
- "int $0x80\n" \
- : "=a" (_ret) \
- : "r"(_arg1), \
- "0"(_num) \
- : "memory", "cc" \
- ); \
- _ret; \
-})
-
-#define my_syscall2(num, arg1, arg2) \
-({ \
- long _ret; \
- register long _num asm("eax") = (num); \
- register long _arg1 asm("ebx") = (long)(arg1); \
- register long _arg2 asm("ecx") = (long)(arg2); \
- \
- asm volatile ( \
- "int $0x80\n" \
- : "=a" (_ret) \
- : "r"(_arg1), "r"(_arg2), \
- "0"(_num) \
- : "memory", "cc" \
- ); \
- _ret; \
-})
-
-#define my_syscall3(num, arg1, arg2, arg3) \
-({ \
- long _ret; \
- register long _num asm("eax") = (num); \
- register long _arg1 asm("ebx") = (long)(arg1); \
- register long _arg2 asm("ecx") = (long)(arg2); \
- register long _arg3 asm("edx") = (long)(arg3); \
- \
- asm volatile ( \
- "int $0x80\n" \
- : "=a" (_ret) \
- : "r"(_arg1), "r"(_arg2), "r"(_arg3), \
- "0"(_num) \
- : "memory", "cc" \
- ); \
- _ret; \
-})
-
-#define my_syscall4(num, arg1, arg2, arg3, arg4) \
-({ \
- long _ret; \
- register long _num asm("eax") = (num); \
- register long _arg1 asm("ebx") = (long)(arg1); \
- register long _arg2 asm("ecx") = (long)(arg2); \
- register long _arg3 asm("edx") = (long)(arg3); \
- register long _arg4 asm("esi") = (long)(arg4); \
- \
- asm volatile ( \
- "int $0x80\n" \
- : "=a" (_ret) \
- : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), \
- "0"(_num) \
- : "memory", "cc" \
- ); \
- _ret; \
-})
-
-#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \
-({ \
- long _ret; \
- register long _num asm("eax") = (num); \
- register long _arg1 asm("ebx") = (long)(arg1); \
- register long _arg2 asm("ecx") = (long)(arg2); \
- register long _arg3 asm("edx") = (long)(arg3); \
- register long _arg4 asm("esi") = (long)(arg4); \
- register long _arg5 asm("edi") = (long)(arg5); \
- \
- asm volatile ( \
- "int $0x80\n" \
- : "=a" (_ret) \
- : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
- "0"(_num) \
- : "memory", "cc" \
- ); \
- _ret; \
-})
-
-/* startup code */
-/*
- * i386 System V ABI mandates:
- * 1) last pushed argument must be 16-byte aligned.
- * 2) The deepest stack frame should be set to zero
- *
- */
-asm(".section .text\n"
- ".global _start\n"
- "_start:\n"
- "pop %eax\n" // argc (first arg, %eax)
- "mov %esp, %ebx\n" // argv[] (second arg, %ebx)
- "lea 4(%ebx,%eax,4),%ecx\n" // then a NULL then envp (third arg, %ecx)
- "xor %ebp, %ebp\n" // zero the stack frame
- "and $-16, %esp\n" // x86 ABI : esp must be 16-byte aligned before
- "sub $4, %esp\n" // the call instruction (args are aligned)
- "push %ecx\n" // push all registers on the stack so that we
- "push %ebx\n" // support both regparm and plain stack modes
- "push %eax\n"
- "call main\n" // main() returns the status code in %eax
- "mov %eax, %ebx\n" // retrieve exit code (32-bit int)
- "movl $1, %eax\n" // NR_exit == 1
- "int $0x80\n" // exit now
- "hlt\n" // ensure it does not
- "");
-
-/* fcntl / open */
-#define O_RDONLY 0
-#define O_WRONLY 1
-#define O_RDWR 2
-#define O_CREAT 0x40
-#define O_EXCL 0x80
-#define O_NOCTTY 0x100
-#define O_TRUNC 0x200
-#define O_APPEND 0x400
-#define O_NONBLOCK 0x800
-#define O_DIRECTORY 0x10000
-
-/* The struct returned by the stat() syscall, 32-bit only, the syscall returns
- * exactly 56 bytes (stops before the unused array).
- */
-struct sys_stat_struct {
- unsigned long st_dev;
- unsigned long st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
-
- unsigned long st_rdev;
- unsigned long st_size;
- unsigned long st_blksize;
- unsigned long st_blocks;
-
- unsigned long st_atime;
- unsigned long st_atime_nsec;
- unsigned long st_mtime;
- unsigned long st_mtime_nsec;
-
- unsigned long st_ctime;
- unsigned long st_ctime_nsec;
- unsigned long __unused[2];
-};
-
-#elif defined(__ARM_EABI__)
-/* Syscalls for ARM in ARM or Thumb modes :
- * - registers are 32-bit
- * - stack is 8-byte aligned
- * ( http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.faqs/ka4127.html)
- * - syscall number is passed in r7
- * - arguments are in r0, r1, r2, r3, r4, r5
- * - the system call is performed by calling svc #0
- * - syscall return comes in r0.
- * - only lr is clobbered.
- * - the arguments are cast to long and assigned into the target registers
- * which are then simply passed as registers to the asm code, so that we
- * don't have to experience issues with register constraints.
- * - the syscall number is always specified last in order to allow to force
- * some registers before (gcc refuses a %-register at the last position).
- *
- * Also, ARM supports the old_select syscall if newselect is not available
- */
-#define __ARCH_WANT_SYS_OLD_SELECT
-
-#define my_syscall0(num) \
-({ \
- register long _num asm("r7") = (num); \
- register long _arg1 asm("r0"); \
- \
- asm volatile ( \
- "svc #0\n" \
- : "=r"(_arg1) \
- : "r"(_num) \
- : "memory", "cc", "lr" \
- ); \
- _arg1; \
-})
-
-#define my_syscall1(num, arg1) \
-({ \
- register long _num asm("r7") = (num); \
- register long _arg1 asm("r0") = (long)(arg1); \
- \
- asm volatile ( \
- "svc #0\n" \
- : "=r"(_arg1) \
- : "r"(_arg1), \
- "r"(_num) \
- : "memory", "cc", "lr" \
- ); \
- _arg1; \
-})
-
-#define my_syscall2(num, arg1, arg2) \
-({ \
- register long _num asm("r7") = (num); \
- register long _arg1 asm("r0") = (long)(arg1); \
- register long _arg2 asm("r1") = (long)(arg2); \
- \
- asm volatile ( \
- "svc #0\n" \
- : "=r"(_arg1) \
- : "r"(_arg1), "r"(_arg2), \
- "r"(_num) \
- : "memory", "cc", "lr" \
- ); \
- _arg1; \
-})
-
-#define my_syscall3(num, arg1, arg2, arg3) \
-({ \
- register long _num asm("r7") = (num); \
- register long _arg1 asm("r0") = (long)(arg1); \
- register long _arg2 asm("r1") = (long)(arg2); \
- register long _arg3 asm("r2") = (long)(arg3); \
- \
- asm volatile ( \
- "svc #0\n" \
- : "=r"(_arg1) \
- : "r"(_arg1), "r"(_arg2), "r"(_arg3), \
- "r"(_num) \
- : "memory", "cc", "lr" \
- ); \
- _arg1; \
-})
-
-#define my_syscall4(num, arg1, arg2, arg3, arg4) \
-({ \
- register long _num asm("r7") = (num); \
- register long _arg1 asm("r0") = (long)(arg1); \
- register long _arg2 asm("r1") = (long)(arg2); \
- register long _arg3 asm("r2") = (long)(arg3); \
- register long _arg4 asm("r3") = (long)(arg4); \
- \
- asm volatile ( \
- "svc #0\n" \
- : "=r"(_arg1) \
- : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), \
- "r"(_num) \
- : "memory", "cc", "lr" \
- ); \
- _arg1; \
-})
-
-#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \
-({ \
- register long _num asm("r7") = (num); \
- register long _arg1 asm("r0") = (long)(arg1); \
- register long _arg2 asm("r1") = (long)(arg2); \
- register long _arg3 asm("r2") = (long)(arg3); \
- register long _arg4 asm("r3") = (long)(arg4); \
- register long _arg5 asm("r4") = (long)(arg5); \
- \
- asm volatile ( \
- "svc #0\n" \
- : "=r" (_arg1) \
- : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
- "r"(_num) \
- : "memory", "cc", "lr" \
- ); \
- _arg1; \
-})
-
-/* startup code */
-asm(".section .text\n"
- ".global _start\n"
- "_start:\n"
-#if defined(__THUMBEB__) || defined(__THUMBEL__)
- /* We enter here in 32-bit mode but if some previous functions were in
- * 16-bit mode, the assembler cannot know, so we need to tell it we're in
- * 32-bit now, then switch to 16-bit (is there a better way to do it than
- * adding 1 by hand ?) and tell the asm we're now in 16-bit mode so that
- * it generates correct instructions. Note that we do not support thumb1.
- */
- ".code 32\n"
- "add r0, pc, #1\n"
- "bx r0\n"
- ".code 16\n"
-#endif
- "pop {%r0}\n" // argc was in the stack
- "mov %r1, %sp\n" // argv = sp
- "add %r2, %r1, %r0, lsl #2\n" // envp = argv + 4*argc ...
- "add %r2, %r2, $4\n" // ... + 4
- "and %r3, %r1, $-8\n" // AAPCS : sp must be 8-byte aligned in the
- "mov %sp, %r3\n" // callee, an bl doesn't push (lr=pc)
- "bl main\n" // main() returns the status code, we'll exit with it.
- "movs r7, $1\n" // NR_exit == 1
- "svc $0x00\n"
- "");
-
-/* fcntl / open */
-#define O_RDONLY 0
-#define O_WRONLY 1
-#define O_RDWR 2
-#define O_CREAT 0x40
-#define O_EXCL 0x80
-#define O_NOCTTY 0x100
-#define O_TRUNC 0x200
-#define O_APPEND 0x400
-#define O_NONBLOCK 0x800
-#define O_DIRECTORY 0x4000
-
-/* The struct returned by the stat() syscall, 32-bit only, the syscall returns
- * exactly 56 bytes (stops before the unused array). In big endian, the format
- * differs as devices are returned as short only.
- */
-struct sys_stat_struct {
-#if defined(__ARMEB__)
- unsigned short st_dev;
- unsigned short __pad1;
-#else
- unsigned long st_dev;
-#endif
- unsigned long st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
-#if defined(__ARMEB__)
- unsigned short st_rdev;
- unsigned short __pad2;
-#else
- unsigned long st_rdev;
-#endif
- unsigned long st_size;
- unsigned long st_blksize;
- unsigned long st_blocks;
- unsigned long st_atime;
- unsigned long st_atime_nsec;
- unsigned long st_mtime;
- unsigned long st_mtime_nsec;
- unsigned long st_ctime;
- unsigned long st_ctime_nsec;
- unsigned long __unused[2];
-};
-
-#elif defined(__aarch64__)
-/* Syscalls for AARCH64 :
- * - registers are 64-bit
- * - stack is 16-byte aligned
- * - syscall number is passed in x8
- * - arguments are in x0, x1, x2, x3, x4, x5
- * - the system call is performed by calling svc 0
- * - syscall return comes in x0.
- * - the arguments are cast to long and assigned into the target registers
- * which are then simply passed as registers to the asm code, so that we
- * don't have to experience issues with register constraints.
- *
- * On aarch64, select() is not implemented so we have to use pselect6().
- */
-#define __ARCH_WANT_SYS_PSELECT6
-
-#define my_syscall0(num) \
-({ \
- register long _num asm("x8") = (num); \
- register long _arg1 asm("x0"); \
- \
- asm volatile ( \
- "svc #0\n" \
- : "=r"(_arg1) \
- : "r"(_num) \
- : "memory", "cc" \
- ); \
- _arg1; \
-})
-
-#define my_syscall1(num, arg1) \
-({ \
- register long _num asm("x8") = (num); \
- register long _arg1 asm("x0") = (long)(arg1); \
- \
- asm volatile ( \
- "svc #0\n" \
- : "=r"(_arg1) \
- : "r"(_arg1), \
- "r"(_num) \
- : "memory", "cc" \
- ); \
- _arg1; \
-})
-
-#define my_syscall2(num, arg1, arg2) \
-({ \
- register long _num asm("x8") = (num); \
- register long _arg1 asm("x0") = (long)(arg1); \
- register long _arg2 asm("x1") = (long)(arg2); \
- \
- asm volatile ( \
- "svc #0\n" \
- : "=r"(_arg1) \
- : "r"(_arg1), "r"(_arg2), \
- "r"(_num) \
- : "memory", "cc" \
- ); \
- _arg1; \
-})
-
-#define my_syscall3(num, arg1, arg2, arg3) \
-({ \
- register long _num asm("x8") = (num); \
- register long _arg1 asm("x0") = (long)(arg1); \
- register long _arg2 asm("x1") = (long)(arg2); \
- register long _arg3 asm("x2") = (long)(arg3); \
- \
- asm volatile ( \
- "svc #0\n" \
- : "=r"(_arg1) \
- : "r"(_arg1), "r"(_arg2), "r"(_arg3), \
- "r"(_num) \
- : "memory", "cc" \
- ); \
- _arg1; \
-})
-
-#define my_syscall4(num, arg1, arg2, arg3, arg4) \
-({ \
- register long _num asm("x8") = (num); \
- register long _arg1 asm("x0") = (long)(arg1); \
- register long _arg2 asm("x1") = (long)(arg2); \
- register long _arg3 asm("x2") = (long)(arg3); \
- register long _arg4 asm("x3") = (long)(arg4); \
- \
- asm volatile ( \
- "svc #0\n" \
- : "=r"(_arg1) \
- : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), \
- "r"(_num) \
- : "memory", "cc" \
- ); \
- _arg1; \
-})
-
-#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \
-({ \
- register long _num asm("x8") = (num); \
- register long _arg1 asm("x0") = (long)(arg1); \
- register long _arg2 asm("x1") = (long)(arg2); \
- register long _arg3 asm("x2") = (long)(arg3); \
- register long _arg4 asm("x3") = (long)(arg4); \
- register long _arg5 asm("x4") = (long)(arg5); \
- \
- asm volatile ( \
- "svc #0\n" \
- : "=r" (_arg1) \
- : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
- "r"(_num) \
- : "memory", "cc" \
- ); \
- _arg1; \
-})
-
-#define my_syscall6(num, arg1, arg2, arg3, arg4, arg5, arg6) \
-({ \
- register long _num asm("x8") = (num); \
- register long _arg1 asm("x0") = (long)(arg1); \
- register long _arg2 asm("x1") = (long)(arg2); \
- register long _arg3 asm("x2") = (long)(arg3); \
- register long _arg4 asm("x3") = (long)(arg4); \
- register long _arg5 asm("x4") = (long)(arg5); \
- register long _arg6 asm("x5") = (long)(arg6); \
- \
- asm volatile ( \
- "svc #0\n" \
- : "=r" (_arg1) \
- : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
- "r"(_arg6), "r"(_num) \
- : "memory", "cc" \
- ); \
- _arg1; \
-})
-
-/* startup code */
-asm(".section .text\n"
- ".global _start\n"
- "_start:\n"
- "ldr x0, [sp]\n" // argc (x0) was in the stack
- "add x1, sp, 8\n" // argv (x1) = sp
- "lsl x2, x0, 3\n" // envp (x2) = 8*argc ...
- "add x2, x2, 8\n" // + 8 (skip null)
- "add x2, x2, x1\n" // + argv
- "and sp, x1, -16\n" // sp must be 16-byte aligned in the callee
- "bl main\n" // main() returns the status code, we'll exit with it.
- "mov x8, 93\n" // NR_exit == 93
- "svc #0\n"
- "");
-
-/* fcntl / open */
-#define O_RDONLY 0
-#define O_WRONLY 1
-#define O_RDWR 2
-#define O_CREAT 0x40
-#define O_EXCL 0x80
-#define O_NOCTTY 0x100
-#define O_TRUNC 0x200
-#define O_APPEND 0x400
-#define O_NONBLOCK 0x800
-#define O_DIRECTORY 0x4000
-
-/* The struct returned by the newfstatat() syscall. Differs slightly from the
- * x86_64's stat one by field ordering, so be careful.
- */
-struct sys_stat_struct {
- unsigned long st_dev;
- unsigned long st_ino;
- unsigned int st_mode;
- unsigned int st_nlink;
- unsigned int st_uid;
- unsigned int st_gid;
-
- unsigned long st_rdev;
- unsigned long __pad1;
- long st_size;
- int st_blksize;
- int __pad2;
-
- long st_blocks;
- long st_atime;
- unsigned long st_atime_nsec;
- long st_mtime;
-
- unsigned long st_mtime_nsec;
- long st_ctime;
- unsigned long st_ctime_nsec;
- unsigned int __unused[2];
-};
-
-#elif defined(__mips__) && defined(_ABIO32)
-/* Syscalls for MIPS ABI O32 :
- * - WARNING! there's always a delayed slot!
- * - WARNING again, the syntax is different, registers take a '$' and numbers
- * do not.
- * - registers are 32-bit
- * - stack is 8-byte aligned
- * - syscall number is passed in v0 (starts at 0xfa0).
- * - arguments are in a0, a1, a2, a3, then the stack. The caller needs to
- * leave some room in the stack for the callee to save a0..a3 if needed.
- * - Many registers are clobbered, in fact only a0..a2 and s0..s8 are
- * preserved. See: https://www.linux-mips.org/wiki/Syscall as well as
- * scall32-o32.S in the kernel sources.
- * - the system call is performed by calling "syscall"
- * - syscall return comes in v0, and register a3 needs to be checked to know
- * if an error occurred, in which case errno is in v0.
- * - the arguments are cast to long and assigned into the target registers
- * which are then simply passed as registers to the asm code, so that we
- * don't have to experience issues with register constraints.
- */
-
-#define my_syscall0(num) \
-({ \
- register long _num asm("v0") = (num); \
- register long _arg4 asm("a3"); \
- \
- asm volatile ( \
- "addiu $sp, $sp, -32\n" \
- "syscall\n" \
- "addiu $sp, $sp, 32\n" \
- : "=r"(_num), "=r"(_arg4) \
- : "r"(_num) \
- : "memory", "cc", "at", "v1", "hi", "lo", \
- "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \
- ); \
- _arg4 ? -_num : _num; \
-})
-
-#define my_syscall1(num, arg1) \
-({ \
- register long _num asm("v0") = (num); \
- register long _arg1 asm("a0") = (long)(arg1); \
- register long _arg4 asm("a3"); \
- \
- asm volatile ( \
- "addiu $sp, $sp, -32\n" \
- "syscall\n" \
- "addiu $sp, $sp, 32\n" \
- : "=r"(_num), "=r"(_arg4) \
- : "0"(_num), \
- "r"(_arg1) \
- : "memory", "cc", "at", "v1", "hi", "lo", \
- "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \
- ); \
- _arg4 ? -_num : _num; \
-})
-
-#define my_syscall2(num, arg1, arg2) \
-({ \
- register long _num asm("v0") = (num); \
- register long _arg1 asm("a0") = (long)(arg1); \
- register long _arg2 asm("a1") = (long)(arg2); \
- register long _arg4 asm("a3"); \
- \
- asm volatile ( \
- "addiu $sp, $sp, -32\n" \
- "syscall\n" \
- "addiu $sp, $sp, 32\n" \
- : "=r"(_num), "=r"(_arg4) \
- : "0"(_num), \
- "r"(_arg1), "r"(_arg2) \
- : "memory", "cc", "at", "v1", "hi", "lo", \
- "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \
- ); \
- _arg4 ? -_num : _num; \
-})
-
-#define my_syscall3(num, arg1, arg2, arg3) \
-({ \
- register long _num asm("v0") = (num); \
- register long _arg1 asm("a0") = (long)(arg1); \
- register long _arg2 asm("a1") = (long)(arg2); \
- register long _arg3 asm("a2") = (long)(arg3); \
- register long _arg4 asm("a3"); \
- \
- asm volatile ( \
- "addiu $sp, $sp, -32\n" \
- "syscall\n" \
- "addiu $sp, $sp, 32\n" \
- : "=r"(_num), "=r"(_arg4) \
- : "0"(_num), \
- "r"(_arg1), "r"(_arg2), "r"(_arg3) \
- : "memory", "cc", "at", "v1", "hi", "lo", \
- "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \
- ); \
- _arg4 ? -_num : _num; \
-})
-
-#define my_syscall4(num, arg1, arg2, arg3, arg4) \
-({ \
- register long _num asm("v0") = (num); \
- register long _arg1 asm("a0") = (long)(arg1); \
- register long _arg2 asm("a1") = (long)(arg2); \
- register long _arg3 asm("a2") = (long)(arg3); \
- register long _arg4 asm("a3") = (long)(arg4); \
- \
- asm volatile ( \
- "addiu $sp, $sp, -32\n" \
- "syscall\n" \
- "addiu $sp, $sp, 32\n" \
- : "=r" (_num), "=r"(_arg4) \
- : "0"(_num), \
- "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4) \
- : "memory", "cc", "at", "v1", "hi", "lo", \
- "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \
- ); \
- _arg4 ? -_num : _num; \
-})
-
-#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \
-({ \
- register long _num asm("v0") = (num); \
- register long _arg1 asm("a0") = (long)(arg1); \
- register long _arg2 asm("a1") = (long)(arg2); \
- register long _arg3 asm("a2") = (long)(arg3); \
- register long _arg4 asm("a3") = (long)(arg4); \
- register long _arg5 = (long)(arg5); \
- \
- asm volatile ( \
- "addiu $sp, $sp, -32\n" \
- "sw %7, 16($sp)\n" \
- "syscall\n " \
- "addiu $sp, $sp, 32\n" \
- : "=r" (_num), "=r"(_arg4) \
- : "0"(_num), \
- "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5) \
- : "memory", "cc", "at", "v1", "hi", "lo", \
- "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \
- ); \
- _arg4 ? -_num : _num; \
-})
-
-/* startup code, note that it's called __start on MIPS */
-asm(".section .text\n"
- ".set nomips16\n"
- ".global __start\n"
- ".set noreorder\n"
- ".option pic0\n"
- ".ent __start\n"
- "__start:\n"
- "lw $a0,($sp)\n" // argc was in the stack
- "addiu $a1, $sp, 4\n" // argv = sp + 4
- "sll $a2, $a0, 2\n" // a2 = argc * 4
- "add $a2, $a2, $a1\n" // envp = argv + 4*argc ...
- "addiu $a2, $a2, 4\n" // ... + 4
- "li $t0, -8\n"
- "and $sp, $sp, $t0\n" // sp must be 8-byte aligned
- "addiu $sp,$sp,-16\n" // the callee expects to save a0..a3 there!
- "jal main\n" // main() returns the status code, we'll exit with it.
- "nop\n" // delayed slot
- "move $a0, $v0\n" // retrieve 32-bit exit code from v0
- "li $v0, 4001\n" // NR_exit == 4001
- "syscall\n"
- ".end __start\n"
- "");
-
-/* fcntl / open */
-#define O_RDONLY 0
-#define O_WRONLY 1
-#define O_RDWR 2
-#define O_APPEND 0x0008
-#define O_NONBLOCK 0x0080
-#define O_CREAT 0x0100
-#define O_TRUNC 0x0200
-#define O_EXCL 0x0400
-#define O_NOCTTY 0x0800
-#define O_DIRECTORY 0x10000
-
-/* The struct returned by the stat() syscall. 88 bytes are returned by the
- * syscall.
- */
-struct sys_stat_struct {
- unsigned int st_dev;
- long st_pad1[3];
- unsigned long st_ino;
- unsigned int st_mode;
- unsigned int st_nlink;
- unsigned int st_uid;
- unsigned int st_gid;
- unsigned int st_rdev;
- long st_pad2[2];
- long st_size;
- long st_pad3;
- long st_atime;
- long st_atime_nsec;
- long st_mtime;
- long st_mtime_nsec;
- long st_ctime;
- long st_ctime_nsec;
- long st_blksize;
- long st_blocks;
- long st_pad4[14];
-};
-
-#elif defined(__riscv)
-
-#if __riscv_xlen == 64
-#define PTRLOG "3"
-#define SZREG "8"
-#elif __riscv_xlen == 32
-#define PTRLOG "2"
-#define SZREG "4"
-#endif
-
-/* Syscalls for RISCV :
- * - stack is 16-byte aligned
- * - syscall number is passed in a7
- * - arguments are in a0, a1, a2, a3, a4, a5
- * - the system call is performed by calling ecall
- * - syscall return comes in a0
- * - the arguments are cast to long and assigned into the target
- * registers which are then simply passed as registers to the asm code,
- * so that we don't have to experience issues with register constraints.
- */
-
-#define my_syscall0(num) \
-({ \
- register long _num asm("a7") = (num); \
- register long _arg1 asm("a0"); \
- \
- asm volatile ( \
- "ecall\n\t" \
- : "=r"(_arg1) \
- : "r"(_num) \
- : "memory", "cc" \
- ); \
- _arg1; \
-})
-
-#define my_syscall1(num, arg1) \
-({ \
- register long _num asm("a7") = (num); \
- register long _arg1 asm("a0") = (long)(arg1); \
- \
- asm volatile ( \
- "ecall\n" \
- : "+r"(_arg1) \
- : "r"(_num) \
- : "memory", "cc" \
- ); \
- _arg1; \
-})
-
-#define my_syscall2(num, arg1, arg2) \
-({ \
- register long _num asm("a7") = (num); \
- register long _arg1 asm("a0") = (long)(arg1); \
- register long _arg2 asm("a1") = (long)(arg2); \
- \
- asm volatile ( \
- "ecall\n" \
- : "+r"(_arg1) \
- : "r"(_arg2), \
- "r"(_num) \
- : "memory", "cc" \
- ); \
- _arg1; \
-})
-
-#define my_syscall3(num, arg1, arg2, arg3) \
-({ \
- register long _num asm("a7") = (num); \
- register long _arg1 asm("a0") = (long)(arg1); \
- register long _arg2 asm("a1") = (long)(arg2); \
- register long _arg3 asm("a2") = (long)(arg3); \
- \
- asm volatile ( \
- "ecall\n\t" \
- : "+r"(_arg1) \
- : "r"(_arg2), "r"(_arg3), \
- "r"(_num) \
- : "memory", "cc" \
- ); \
- _arg1; \
-})
-
-#define my_syscall4(num, arg1, arg2, arg3, arg4) \
-({ \
- register long _num asm("a7") = (num); \
- register long _arg1 asm("a0") = (long)(arg1); \
- register long _arg2 asm("a1") = (long)(arg2); \
- register long _arg3 asm("a2") = (long)(arg3); \
- register long _arg4 asm("a3") = (long)(arg4); \
- \
- asm volatile ( \
- "ecall\n" \
- : "+r"(_arg1) \
- : "r"(_arg2), "r"(_arg3), "r"(_arg4), \
- "r"(_num) \
- : "memory", "cc" \
- ); \
- _arg1; \
-})
-
-#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \
-({ \
- register long _num asm("a7") = (num); \
- register long _arg1 asm("a0") = (long)(arg1); \
- register long _arg2 asm("a1") = (long)(arg2); \
- register long _arg3 asm("a2") = (long)(arg3); \
- register long _arg4 asm("a3") = (long)(arg4); \
- register long _arg5 asm("a4") = (long)(arg5); \
- \
- asm volatile ( \
- "ecall\n" \
- : "+r"(_arg1) \
- : "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
- "r"(_num) \
- : "memory", "cc" \
- ); \
- _arg1; \
-})
-
-#define my_syscall6(num, arg1, arg2, arg3, arg4, arg5, arg6) \
-({ \
- register long _num asm("a7") = (num); \
- register long _arg1 asm("a0") = (long)(arg1); \
- register long _arg2 asm("a1") = (long)(arg2); \
- register long _arg3 asm("a2") = (long)(arg3); \
- register long _arg4 asm("a3") = (long)(arg4); \
- register long _arg5 asm("a4") = (long)(arg5); \
- register long _arg6 asm("a5") = (long)(arg6); \
- \
- asm volatile ( \
- "ecall\n" \
- : "+r"(_arg1) \
- : "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), "r"(_arg6), \
- "r"(_num) \
- : "memory", "cc" \
- ); \
- _arg1; \
-})
-
-/* startup code */
-asm(".section .text\n"
- ".global _start\n"
- "_start:\n"
- ".option push\n"
- ".option norelax\n"
- "lla gp, __global_pointer$\n"
- ".option pop\n"
- "ld a0, 0(sp)\n" // argc (a0) was in the stack
- "add a1, sp, "SZREG"\n" // argv (a1) = sp
- "slli a2, a0, "PTRLOG"\n" // envp (a2) = SZREG*argc ...
- "add a2, a2, "SZREG"\n" // + SZREG (skip null)
- "add a2,a2,a1\n" // + argv
- "andi sp,a1,-16\n" // sp must be 16-byte aligned
- "call main\n" // main() returns the status code, we'll exit with it.
- "li a7, 93\n" // NR_exit == 93
- "ecall\n"
- "");
-
-/* fcntl / open */
-#define O_RDONLY 0
-#define O_WRONLY 1
-#define O_RDWR 2
-#define O_CREAT 0x100
-#define O_EXCL 0x200
-#define O_NOCTTY 0x400
-#define O_TRUNC 0x1000
-#define O_APPEND 0x2000
-#define O_NONBLOCK 0x4000
-#define O_DIRECTORY 0x200000
-
-struct sys_stat_struct {
- unsigned long st_dev; /* Device. */
- unsigned long st_ino; /* File serial number. */
- unsigned int st_mode; /* File mode. */
- unsigned int st_nlink; /* Link count. */
- unsigned int st_uid; /* User ID of the file's owner. */
- unsigned int st_gid; /* Group ID of the file's group. */
- unsigned long st_rdev; /* Device number, if device. */
- unsigned long __pad1;
- long st_size; /* Size of file, in bytes. */
- int st_blksize; /* Optimal block size for I/O. */
- int __pad2;
- long st_blocks; /* Number 512-byte blocks allocated. */
- long st_atime; /* Time of last access. */
- unsigned long st_atime_nsec;
- long st_mtime; /* Time of last modification. */
- unsigned long st_mtime_nsec;
- long st_ctime; /* Time of last status change. */
- unsigned long st_ctime_nsec;
- unsigned int __unused4;
- unsigned int __unused5;
-};
-
-#endif
-

/* Below are the C functions used to declare the raw syscalls. They try to be
* architecture-agnostic, and return either a success or -errno. Declaring them
diff --git a/tools/include/nolibc/std.h b/tools/include/nolibc/std.h
new file mode 100644
index 000000000000..1747ae125392
--- /dev/null
+++ b/tools/include/nolibc/std.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
+/*
+ * Standard definitions and types for NOLIBC
+ * Copyright (C) 2017-2021 Willy Tarreau <w@1wt.eu>
+ */
+
+#ifndef _NOLIBC_STD_H
+#define _NOLIBC_STD_H
+
+/* Declare a few quite common macros and types that usually are in stdlib.h,
+ * stdint.h, ctype.h, unistd.h and a few other common locations. Please place
+ * integer type definitions and generic macros here, but avoid OS-specific and
+ * syscall-specific stuff, as this file is expected to be included very early.
+ */
+
+/* note: may already be defined */
+#ifndef NULL
+#define NULL ((void *)0)
+#endif
+
+/* stdint types */
+typedef unsigned char uint8_t;
+typedef signed char int8_t;
+typedef unsigned short uint16_t;
+typedef signed short int16_t;
+typedef unsigned int uint32_t;
+typedef signed int int32_t;
+typedef unsigned long long uint64_t;
+typedef signed long long int64_t;
+typedef unsigned long size_t;
+typedef signed long ssize_t;
+typedef unsigned long uintptr_t;
+typedef signed long intptr_t;
+typedef signed long ptrdiff_t;
+
+/* those are commonly provided by sys/types.h */
+typedef unsigned int dev_t;
+typedef unsigned long ino_t;
+typedef unsigned int mode_t;
+typedef signed int pid_t;
+typedef unsigned int uid_t;
+typedef unsigned int gid_t;
+typedef unsigned long nlink_t;
+typedef signed long off_t;
+typedef signed long blksize_t;
+typedef signed long blkcnt_t;
+typedef signed long time_t;
+
+#endif /* _NOLIBC_STD_H */
diff --git a/tools/include/nolibc/types.h b/tools/include/nolibc/types.h
new file mode 100644
index 000000000000..2f09abaf95f1
--- /dev/null
+++ b/tools/include/nolibc/types.h
@@ -0,0 +1,133 @@
+/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
+/*
+ * Special types used by various syscalls for NOLIBC
+ * Copyright (C) 2017-2021 Willy Tarreau <w@1wt.eu>
+ */
+
+#ifndef _NOLIBC_TYPES_H
+#define _NOLIBC_TYPES_H
+
+#include "std.h"
+#include <linux/time.h>
+
+
+/* Only the generic macros and types may be defined here. The arch-specific
+ * ones such as the O_RDONLY and related macros used by fcntl() and open(), or
+ * the layout of sys_stat_struct must not be defined here.
+ */
+
+/* stat flags (WARNING, octal here) */
+#define S_IFDIR 0040000
+#define S_IFCHR 0020000
+#define S_IFBLK 0060000
+#define S_IFREG 0100000
+#define S_IFIFO 0010000
+#define S_IFLNK 0120000
+#define S_IFSOCK 0140000
+#define S_IFMT 0170000
+
+#define S_ISDIR(mode) (((mode) & S_IFDIR) == S_IFDIR)
+#define S_ISCHR(mode) (((mode) & S_IFCHR) == S_IFCHR)
+#define S_ISBLK(mode) (((mode) & S_IFBLK) == S_IFBLK)
+#define S_ISREG(mode) (((mode) & S_IFREG) == S_IFREG)
+#define S_ISFIFO(mode) (((mode) & S_IFIFO) == S_IFIFO)
+#define S_ISLNK(mode) (((mode) & S_IFLNK) == S_IFLNK)
+#define S_ISSOCK(mode) (((mode) & S_IFSOCK) == S_IFSOCK)
+
+/* dirent types */
+#define DT_UNKNOWN 0x0
+#define DT_FIFO 0x1
+#define DT_CHR 0x2
+#define DT_DIR 0x4
+#define DT_BLK 0x6
+#define DT_REG 0x8
+#define DT_LNK 0xa
+#define DT_SOCK 0xc
+
+/* commonly an fd_set represents 256 FDs */
+#define FD_SETSIZE 256
+
+/* Special FD used by all the *at functions */
+#ifndef AT_FDCWD
+#define AT_FDCWD (-100)
+#endif
+
+/* whence values for lseek() */
+#define SEEK_SET 0
+#define SEEK_CUR 1
+#define SEEK_END 2
+
+/* cmd for reboot() */
+#define LINUX_REBOOT_MAGIC1 0xfee1dead
+#define LINUX_REBOOT_MAGIC2 0x28121969
+#define LINUX_REBOOT_CMD_HALT 0xcdef0123
+#define LINUX_REBOOT_CMD_POWER_OFF 0x4321fedc
+#define LINUX_REBOOT_CMD_RESTART 0x01234567
+#define LINUX_REBOOT_CMD_SW_SUSPEND 0xd000fce2
+
+/* Macros used on waitpid()'s return status */
+#define WEXITSTATUS(status) (((status) & 0xff00) >> 8)
+#define WIFEXITED(status) (((status) & 0x7f) == 0)
+
+
+/* for select() */
+typedef struct {
+ uint32_t fd32[FD_SETSIZE / 32];
+} fd_set;
+
+/* for poll() */
+struct pollfd {
+ int fd;
+ short int events;
+ short int revents;
+};
+
+/* for getdents64() */
+struct linux_dirent64 {
+ uint64_t d_ino;
+ int64_t d_off;
+ unsigned short d_reclen;
+ unsigned char d_type;
+ char d_name[];
+};
+
+/* needed by wait4() */
+struct rusage {
+ struct timeval ru_utime;
+ struct timeval ru_stime;
+ long ru_maxrss;
+ long ru_ixrss;
+ long ru_idrss;
+ long ru_isrss;
+ long ru_minflt;
+ long ru_majflt;
+ long ru_nswap;
+ long ru_inblock;
+ long ru_oublock;
+ long ru_msgsnd;
+ long ru_msgrcv;
+ long ru_nsignals;
+ long ru_nvcsw;
+ long ru_nivcsw;
+};
+
+/* The format of the struct as returned by the libc to the application, which
+ * significantly differs from the format returned by the stat() syscall flavours.
+ */
+struct stat {
+ dev_t st_dev; /* ID of device containing file */
+ ino_t st_ino; /* inode number */
+ mode_t st_mode; /* protection */
+ nlink_t st_nlink; /* number of hard links */
+ uid_t st_uid; /* user ID of owner */
+ gid_t st_gid; /* group ID of owner */
+ dev_t st_rdev; /* device ID (if special file) */
+ off_t st_size; /* total size, in bytes */
+ blksize_t st_blksize; /* blocksize for file system I/O */
+ blkcnt_t st_blocks; /* number of 512B blocks allocated */
+ time_t st_atime; /* time of last access */
+ time_t st_mtime; /* time of last modification */
+ time_t st_ctime; /* time of last status change */
+};
+
+#endif /* _NOLIBC_TYPES_H */
diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index 2fea9952818f..d9ea546850cd 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -17,7 +17,9 @@
#include "util/record.h"
#include <traceevent/event-parse.h>
#include <api/fs/tracing_path.h>
+#ifdef HAVE_LIBBPF_SUPPORT
#include <bpf/bpf.h>
+#endif
#include "util/bpf_map.h"
#include "util/rlimit.h"
#include "builtin.h"
diff --git a/tools/perf/util/auxtrace.c b/tools/perf/util/auxtrace.c
index c7f78d589e1c..0ef4cbf21e62 100644
--- a/tools/perf/util/auxtrace.c
+++ b/tools/perf/util/auxtrace.c
@@ -2545,7 +2545,7 @@ static int find_dso_sym(struct dso *dso, const char *sym_name, u64 *start,
*size = sym->start - *start;
if (idx > 0) {
if (*size)
- return 1;
+ return 0;
} else if (dso_sym_match(sym, sym_name, &cnt, idx)) {
print_duplicate_syms(dso, sym_name);
return -EINVAL;
diff --git a/tools/perf/util/bpf_counter.h b/tools/perf/util/bpf_counter.h
index 65ebaa6694fb..4b5dda7530c4 100644
--- a/tools/perf/util/bpf_counter.h
+++ b/tools/perf/util/bpf_counter.h
@@ -4,9 +4,12 @@

#include <linux/list.h>
#include <sys/resource.h>
+
+#ifdef HAVE_LIBBPF_SUPPORT
#include <bpf/bpf.h>
#include <bpf/btf.h>
#include <bpf/libbpf.h>
+#endif

struct evsel;
struct target;
@@ -87,6 +90,8 @@ static inline void set_max_rlimit(void)
setrlimit(RLIMIT_MEMLOCK, &rinf);
}

+#ifdef HAVE_BPF_SKEL
+
static inline __u32 bpf_link_get_id(int fd)
{
struct bpf_link_info link_info = { .id = 0, };
@@ -127,5 +132,6 @@ static inline int bperf_trigger_reading(int prog_fd, int cpu)

return bpf_prog_test_run_opts(prog_fd, &opts);
}
+#endif /* HAVE_BPF_SKEL */

#endif /* __PERF_BPF_COUNTER_H */
diff --git a/tools/testing/selftests/kvm/rseq_test.c b/tools/testing/selftests/kvm/rseq_test.c
index 2237d1aac801..d7a7e760adc8 100644
--- a/tools/testing/selftests/kvm/rseq_test.c
+++ b/tools/testing/selftests/kvm/rseq_test.c
@@ -233,7 +233,7 @@ int main(int argc, char *argv[])
ucall_init(vm, NULL);

pthread_create(&migration_thread, NULL, migration_worker,
- (void *)(unsigned long)gettid());
+ (void *)(unsigned long)syscall(SYS_gettid));

for (i = 0; !done; i++) {
vcpu_run(vm, VCPU_ID);
diff --git a/tools/testing/selftests/net/af_unix/test_unix_oob.c b/tools/testing/selftests/net/af_unix/test_unix_oob.c
index b57e91e1c3f2..532459a15067 100644
--- a/tools/testing/selftests/net/af_unix/test_unix_oob.c
+++ b/tools/testing/selftests/net/af_unix/test_unix_oob.c
@@ -124,7 +124,7 @@ void producer(struct sockaddr_un *consumer_addr)

wait_for_signal(pipefd[0]);
if (connect(cfd, (struct sockaddr *)consumer_addr,
- sizeof(struct sockaddr)) != 0) {
+ sizeof(*consumer_addr)) != 0) {
perror("Connect failed");
kill(0, SIGTERM);
exit(1);