[PATCH] ethernet: broadcom/sb1250-mac: clean up after SIBYTE_BCM1x55 removal

[PATCH] ethernet: broadcom/sb1250-mac: clean up after SIBYTE_BCM1x55 removal

[Lukas Bulwahn]

With commit b984d7b56dfc ("MIPS: sibyte: Remove unused config option
SIBYTE_BCM1x55"), some #if's in the Broadcom SiByte SOC built-in Ethernet
driver can be simplified.

Simplify prepreprocessor conditions after config SIBYTE_BCM1x55 removal.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
---
I looked around on lore.kernel.org and could not find a pending patch from
Thomas Bogendoerfer related to cleaning up this network driver after he
removed the config. So, to be on the safe side, I just sent this quick
clean-up patch.

 drivers/net/ethernet/broadcom/sb1250-mac.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/sb1250-mac.c b/drivers/net/ethernet/broadcom/sb1250-mac.c
index f02facb60fd1..3a6763c5e8b3 100644
--- a/drivers/net/ethernet/broadcom/sb1250-mac.c
+++ b/drivers/net/ethernet/broadcom/sb1250-mac.c
@@ -73,7 +73,7 @@ MODULE_PARM_DESC(int_timeout_rx, "RX timeout value");
 
 #include <asm/sibyte/board.h>
 #include <asm/sibyte/sb1250.h>
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#if defined(CONFIG_SIBYTE_BCM1x80)
 #include <asm/sibyte/bcm1480_regs.h>
 #include <asm/sibyte/bcm1480_int.h>
 #define R_MAC_DMA_OODPKTLOST_RX	R_MAC_DMA_OODPKTLOST
@@ -87,7 +87,7 @@ MODULE_PARM_DESC(int_timeout_rx, "RX timeout value");
 #include <asm/sibyte/sb1250_mac.h>
 #include <asm/sibyte/sb1250_dma.h>
 
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#if defined(CONFIG_SIBYTE_BCM1x80)
 #define UNIT_INT(n)		(K_BCM1480_INT_MAC_0 + ((n) * 2))
 #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
 #define UNIT_INT(n)		(K_INT_MAC_0 + (n))
@@ -1527,7 +1527,7 @@ static void sbmac_channel_start(struct sbmac_softc *s)
 	 * Turn on the rest of the bits in the enable register
 	 */
 
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#if defined(CONFIG_SIBYTE_BCM1x80)
 	__raw_writeq(M_MAC_RXDMA_EN0 |
 		       M_MAC_TXDMA_EN0, s->sbm_macenable);
 #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
-- 
2.17.1

Re: [PATCH] ethernet: broadcom/sb1250-mac: clean up after SIBYTE_BCM1x55 removal

[Steen.Hegelund]

Hi Lukas,

This looks OK to me.

On Thu Mar 23, 2023 at 6:21 AM CET, Lukas Bulwahn wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> With commit b984d7b56dfc ("MIPS: sibyte: Remove unused config option
> SIBYTE_BCM1x55"), some #if's in the Broadcom SiByte SOC built-in Ethernet
> driver can be simplified.
>
> Simplify prepreprocessor conditions after config SIBYTE_BCM1x55 removal.
>
> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
> ---
> I looked around on lore.kernel.org and could not find a pending patch from
> Thomas Bogendoerfer related to cleaning up this network driver after he
> removed the config. So, to be on the safe side, I just sent this quick
> clean-up patch.
>
>  drivers/net/ethernet/broadcom/sb1250-mac.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/ethernet/broadcom/sb1250-mac.c b/drivers/net/ethernet/broadcom/sb1250-mac.c
> index f02facb60fd1..3a6763c5e8b3 100644
> --- a/drivers/net/ethernet/broadcom/sb1250-mac.c
> +++ b/drivers/net/ethernet/broadcom/sb1250-mac.c
> @@ -73,7 +73,7 @@ MODULE_PARM_DESC(int_timeout_rx, "RX timeout value");
>
>  #include <asm/sibyte/board.h>
>  #include <asm/sibyte/sb1250.h>
> -#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
> +#if defined(CONFIG_SIBYTE_BCM1x80)
>  #include <asm/sibyte/bcm1480_regs.h>
>  #include <asm/sibyte/bcm1480_int.h>
>  #define R_MAC_DMA_OODPKTLOST_RX        R_MAC_DMA_OODPKTLOST
> @@ -87,7 +87,7 @@ MODULE_PARM_DESC(int_timeout_rx, "RX timeout value");
>  #include <asm/sibyte/sb1250_mac.h>
>  #include <asm/sibyte/sb1250_dma.h>
>
> -#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
> +#if defined(CONFIG_SIBYTE_BCM1x80)
>  #define UNIT_INT(n)            (K_BCM1480_INT_MAC_0 + ((n) * 2))
>  #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
>  #define UNIT_INT(n)            (K_INT_MAC_0 + (n))
> @@ -1527,7 +1527,7 @@ static void sbmac_channel_start(struct sbmac_softc *s)
>          * Turn on the rest of the bits in the enable register
>          */
>
> -#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
> +#if defined(CONFIG_SIBYTE_BCM1x80)
>         __raw_writeq(M_MAC_RXDMA_EN0 |
>                        M_MAC_TXDMA_EN0, s->sbm_macenable);
>  #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
> --
> 2.17.1

Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>

BR
Steen

Re: [PATCH] ethernet: broadcom/sb1250-mac: clean up after SIBYTE_BCM1x55 removal

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net-next.git (main)
by David S. Miller <davem@davemloft.net>:

On Thu, 23 Mar 2023 06:21:01 +0100 you wrote:
> With commit b984d7b56dfc ("MIPS: sibyte: Remove unused config option
> SIBYTE_BCM1x55"), some #if's in the Broadcom SiByte SOC built-in Ethernet
> driver can be simplified.
> 
> Simplify prepreprocessor conditions after config SIBYTE_BCM1x55 removal.
> 
> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
> 
> [...]

Here is the summary with links:
  - ethernet: broadcom/sb1250-mac: clean up after SIBYTE_BCM1x55 removal
    https://git.kernel.org/netdev/net-next/c/c34ce2796228

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html