* USB Storage problem (usb hangs)
@ 2005-02-20 17:26 Sebastian Fabrycki
2005-02-23 16:22 ` John Stoffel
0 siblings, 1 reply; 5+ messages in thread
From: Sebastian Fabrycki @ 2005-02-20 17:26 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 356 bytes --]
Hi.
The device is: USB2.0 to IDE 3.5" hard disk enclosure.
Producer: Seven.
Part of /var/log/messages with USB debug enabled in kernel is
attached to this email.
Kernel: 2.6.9, 2.6.10 (i cant remember from which one is attached log).
Distribution: Gentoo.
I'm not subscribed to the list, pleas CC me.
--
Regards
Sebastian Fabrycki
cellsan@interia.pl
[-- Attachment #2: usb-msg.txt --]
[-- Type: text/plain, Size: 4989 bytes --]
Jan 10 23:34:30 globtel usb-storage: USB Mass Storage device detected
Jan 10 23:34:30 globtel usb-storage: -- associate_dev
Jan 10 23:34:30 globtel usb-storage: Vendor: 0x05e3, Product: 0x0702, Revision: 0x0002
Jan 10 23:34:30 globtel usb-storage: Interface Subclass: 0x06, Protocol: 0x50
Jan 10 23:34:30 globtel usb-storage: Vendor: Genesys Logic, Product: USB TO IDE
Jan 10 23:34:30 globtel usb-storage: Transport: Bulk
Jan 10 23:34:30 globtel usb-storage: Protocol: Transparent SCSI
Jan 10 23:34:30 globtel usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
Jan 10 23:34:30 globtel usb-storage: GetMaxLUN command result is 1, data is 0
Jan 10 23:34:30 globtel usb-storage: *** thread sleeping.
Jan 10 23:34:30 globtel scsi0 : SCSI emulation for USB Mass Storage devices
Jan 10 23:34:30 globtel usb-storage: queuecommand called
Jan 10 23:34:30 globtel usb-storage: *** thread awakened.
Jan 10 23:34:30 globtel usb-storage: Faking INQUIRY command
Jan 10 23:34:30 globtel usb-storage: scsi cmd done, result=0x0
Jan 10 23:34:30 globtel usb-storage: *** thread sleeping.
Jan 10 23:34:30 globtel Vendor: Genesys Model: USB to IDE Disk Rev: 0002
Jan 10 23:34:30 globtel Type: Direct-Access ANSI SCSI revision: 02
Jan 10 23:34:30 globtel usb-storage: queuecommand called
Jan 10 23:34:30 globtel usb-storage: *** thread awakened.
Jan 10 23:34:30 globtel usb-storage: Command TEST_UNIT_READY (6 bytes)
Jan 10 23:34:30 globtel usb-storage: 00 00 00 00 00 00
Jan 10 23:34:30 globtel usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6
Jan 10 23:34:30 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 10 23:34:30 globtel usb-storage: Status code 0; transferred 31/31
Jan 10 23:34:30 globtel usb-storage: -- transfer complete
Jan 10 23:34:30 globtel usb-storage: Bulk command transfer result=0
Jan 10 23:34:30 globtel usb-storage: Attempting to get CSW...
Jan 10 23:34:30 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 10 23:34:40 globtel scsi.agent[7459]: Attribute /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/host0/0:0:0:0/type does not exist
Jan 10 23:35:00 globtel usb-storage: command_abort called
Jan 10 23:35:00 globtel usb-storage: usb_stor_stop_transport called
Jan 10 23:35:00 globtel usb-storage: -- cancelling URB
Jan 10 23:35:00 globtel usb-storage: Status code -104; transferred 0/13
Jan 10 23:35:00 globtel usb-storage: -- transfer cancelled
Jan 10 23:35:00 globtel usb-storage: Bulk status result = 4
Jan 10 23:35:00 globtel usb-storage: -- command was aborted
Jan 10 23:35:00 globtel usb-storage: usb_stor_Bulk_reset called
Jan 10 23:35:00 globtel usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jan 10 23:35:20 globtel usb-storage: Timeout -- cancelling URB
Jan 10 23:35:20 globtel usb-storage: Soft reset failed: -104
Jan 10 23:35:20 globtel usb-storage: scsi command aborted
Jan 10 23:35:20 globtel usb-storage: *** thread sleeping.
Jan 10 23:35:20 globtel usb-storage: queuecommand called
Jan 10 23:35:20 globtel usb-storage: *** thread awakened.
Jan 10 23:35:20 globtel usb-storage: Command TEST_UNIT_READY (6 bytes)
Jan 10 23:35:20 globtel usb-storage: 00 00 00 00 00 00
Jan 10 23:35:20 globtel usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6
Jan 10 23:35:20 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 10 23:35:20 globtel usb-storage: Status code 0; transferred 31/31
Jan 10 23:35:20 globtel usb-storage: -- transfer complete
Jan 10 23:35:20 globtel usb-storage: Bulk command transfer result=0
Jan 10 23:35:20 globtel usb-storage: Attempting to get CSW...
Jan 10 23:35:20 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 10 23:35:30 globtel usb-storage: command_abort called
Jan 10 23:35:30 globtel usb-storage: usb_stor_stop_transport called
Jan 10 23:35:30 globtel usb-storage: -- cancelling URB
Jan 10 23:35:30 globtel usb-storage: Status code -104; transferred 0/13
Jan 10 23:35:30 globtel usb-storage: -- transfer cancelled
Jan 10 23:35:30 globtel usb-storage: Bulk status result = 4
Jan 10 23:35:30 globtel usb-storage: -- command was aborted
Jan 10 23:35:30 globtel usb-storage: usb_stor_Bulk_reset called
Jan 10 23:35:30 globtel usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jan 10 23:35:50 globtel usb-storage: Timeout -- cancelling URB
Jan 10 23:35:50 globtel usb-storage: Soft reset failed: -104
Jan 10 23:35:50 globtel usb-storage: scsi command aborted
Jan 10 23:35:50 globtel usb-storage: *** thread sleeping.
Jan 10 23:35:50 globtel usb-storage: device_reset called
Jan 10 23:35:50 globtel usb-storage: usb_stor_Bulk_reset called
Jan 10 23:35:50 globtel usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jan 10 23:36:10 globtel usb-storage: Timeout -- cancelling URB
Jan 10 23:36:10 globtel usb-storage: Soft reset failed: -104
Jan 10 23:36:10 globtel usb-storage: bus_reset called
...
...
^ permalink raw reply [flat|nested] 5+ messages in thread
* USB Storage problem (usb hangs)
@ 2005-02-20 17:34 me
2005-02-21 23:59 ` John Stoffel
0 siblings, 1 reply; 5+ messages in thread
From: me @ 2005-02-20 17:34 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: TEXT/plain, Size: 493 bytes --]
Hi.
The device is: USB2.0 to IDE 3.5" hard disk enclosure.
Producer: Seven.
Part of /var/log/messages with USB debug enabled in kernel is
attached to this email.
Kernel: 2.6.9, 2.6.10 (i cant remember from which one is attached log).
Distribution: Gentoo.
I'm not subscribed to the list, pleas CC me.
--
Regards
Sebastian Fabrycki
cellsan@interia.pl
------------------------------------------------------------------
Sprawdz NOWE parametry hostingu!
>> http://link.interia.pl/f1857 <<
[-- Attachment #2: usb-msg.txt --]
[-- Type: TEXT/plain, Size: 5064 bytes --]
Jan 10 23:34:30 globtel usb-storage: USB Mass Storage device detected
Jan 10 23:34:30 globtel usb-storage: -- associate_dev
Jan 10 23:34:30 globtel usb-storage: Vendor: 0x05e3, Product: 0x0702, Revision: 0x0002
Jan 10 23:34:30 globtel usb-storage: Interface Subclass: 0x06, Protocol: 0x50
Jan 10 23:34:30 globtel usb-storage: Vendor: Genesys Logic, Product: USB TO IDE
Jan 10 23:34:30 globtel usb-storage: Transport: Bulk
Jan 10 23:34:30 globtel usb-storage: Protocol: Transparent SCSI
Jan 10 23:34:30 globtel usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
Jan 10 23:34:30 globtel usb-storage: GetMaxLUN command result is 1, data is 0
Jan 10 23:34:30 globtel usb-storage: *** thread sleeping.
Jan 10 23:34:30 globtel scsi0 : SCSI emulation for USB Mass Storage devices
Jan 10 23:34:30 globtel usb-storage: queuecommand called
Jan 10 23:34:30 globtel usb-storage: *** thread awakened.
Jan 10 23:34:30 globtel usb-storage: Faking INQUIRY command
Jan 10 23:34:30 globtel usb-storage: scsi cmd done, result=0x0
Jan 10 23:34:30 globtel usb-storage: *** thread sleeping.
Jan 10 23:34:30 globtel Vendor: Genesys Model: USB to IDE Disk Rev: 0002
Jan 10 23:34:30 globtel Type: Direct-Access ANSI SCSI revision: 02
Jan 10 23:34:30 globtel usb-storage: queuecommand called
Jan 10 23:34:30 globtel usb-storage: *** thread awakened.
Jan 10 23:34:30 globtel usb-storage: Command TEST_UNIT_READY (6 bytes)
Jan 10 23:34:30 globtel usb-storage: 00 00 00 00 00 00
Jan 10 23:34:30 globtel usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6
Jan 10 23:34:30 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 10 23:34:30 globtel usb-storage: Status code 0; transferred 31/31
Jan 10 23:34:30 globtel usb-storage: -- transfer complete
Jan 10 23:34:30 globtel usb-storage: Bulk command transfer result=0
Jan 10 23:34:30 globtel usb-storage: Attempting to get CSW...
Jan 10 23:34:30 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 10 23:34:40 globtel scsi.agent[7459]: Attribute /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/host0/0:0:0:0/type does not exist
Jan 10 23:35:00 globtel usb-storage: command_abort called
Jan 10 23:35:00 globtel usb-storage: usb_stor_stop_transport called
Jan 10 23:35:00 globtel usb-storage: -- cancelling URB
Jan 10 23:35:00 globtel usb-storage: Status code -104; transferred 0/13
Jan 10 23:35:00 globtel usb-storage: -- transfer cancelled
Jan 10 23:35:00 globtel usb-storage: Bulk status result = 4
Jan 10 23:35:00 globtel usb-storage: -- command was aborted
Jan 10 23:35:00 globtel usb-storage: usb_stor_Bulk_reset called
Jan 10 23:35:00 globtel usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jan 10 23:35:20 globtel usb-storage: Timeout -- cancelling URB
Jan 10 23:35:20 globtel usb-storage: Soft reset failed: -104
Jan 10 23:35:20 globtel usb-storage: scsi command aborted
Jan 10 23:35:20 globtel usb-storage: *** thread sleeping.
Jan 10 23:35:20 globtel usb-storage: queuecommand called
Jan 10 23:35:20 globtel usb-storage: *** thread awakened.
Jan 10 23:35:20 globtel usb-storage: Command TEST_UNIT_READY (6 bytes)
Jan 10 23:35:20 globtel usb-storage: 00 00 00 00 00 00
Jan 10 23:35:20 globtel usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6
Jan 10 23:35:20 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 10 23:35:20 globtel usb-storage: Status code 0; transferred 31/31
Jan 10 23:35:20 globtel usb-storage: -- transfer complete
Jan 10 23:35:20 globtel usb-storage: Bulk command transfer result=0
Jan 10 23:35:20 globtel usb-storage: Attempting to get CSW...
Jan 10 23:35:20 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 10 23:35:30 globtel usb-storage: command_abort called
Jan 10 23:35:30 globtel usb-storage: usb_stor_stop_transport called
Jan 10 23:35:30 globtel usb-storage: -- cancelling URB
Jan 10 23:35:30 globtel usb-storage: Status code -104; transferred 0/13
Jan 10 23:35:30 globtel usb-storage: -- transfer cancelled
Jan 10 23:35:30 globtel usb-storage: Bulk status result = 4
Jan 10 23:35:30 globtel usb-storage: -- command was aborted
Jan 10 23:35:30 globtel usb-storage: usb_stor_Bulk_reset called
Jan 10 23:35:30 globtel usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jan 10 23:35:50 globtel usb-storage: Timeout -- cancelling URB
Jan 10 23:35:50 globtel usb-storage: Soft reset failed: -104
Jan 10 23:35:50 globtel usb-storage: scsi command aborted
Jan 10 23:35:50 globtel usb-storage: *** thread sleeping.
Jan 10 23:35:50 globtel usb-storage: device_reset called
Jan 10 23:35:50 globtel usb-storage: usb_stor_Bulk_reset called
Jan 10 23:35:50 globtel usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jan 10 23:36:10 globtel usb-storage: Timeout -- cancelling URB
Jan 10 23:36:10 globtel usb-storage: Soft reset failed: -104
Jan 10 23:36:10 globtel usb-storage: bus_reset called
...
...
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: USB Storage problem (usb hangs)
2005-02-20 17:34 USB Storage problem (usb hangs) me
@ 2005-02-21 23:59 ` John Stoffel
2005-02-22 2:37 ` John Stoffel
0 siblings, 1 reply; 5+ messages in thread
From: John Stoffel @ 2005-02-21 23:59 UTC (permalink / raw)
To: me; +Cc: linux-kernel
me> The device is: USB2.0 to IDE 3.5" hard disk enclosure.
me> Producer: Seven.
me> Part of /var/log/messages with USB debug enabled in kernel is
me> attached to this email.
me> Kernel: 2.6.9, 2.6.10 (i cant remember from which one is attached log).
me> Distribution: Gentoo.
Try upgrading to 2.6.11-rc2-mm2 or newer, I've found that usb-storage
works a bit better here, though I haven't confirmed this without debug
enabled in the usb-storage driver yet.
Maybe later tonight if I get a chance to reboot.
John
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: USB Storage problem (usb hangs)
2005-02-21 23:59 ` John Stoffel
@ 2005-02-22 2:37 ` John Stoffel
0 siblings, 0 replies; 5+ messages in thread
From: John Stoffel @ 2005-02-22 2:37 UTC (permalink / raw)
To: John Stoffel; +Cc: me, linux-kernel
>>>>> "John" == John Stoffel <john@stoffel.org> writes:
me> Kernel: 2.6.9, 2.6.10 (i cant remember from which one is attached log).
me> Distribution: Gentoo.
John> Try upgrading to 2.6.11-rc2-mm2 or newer, I've found that usb-storage
John> works a bit better here, though I haven't confirmed this without debug
John> enabled in the usb-storage driver yet.
John> Maybe later tonight if I get a chance to reboot.
Just another note, 2.6.11-rc2-mm2 without USB-STORAGE debugging turned
on passes an 'iozone -a' test on my 40gb WD firewire/USB enclosure
under USB 2.0 interface.
Now to swap in the problematic 120gb WD drive and see if that works
under USB as well as firewire too.
John
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: USB Storage problem (usb hangs)
2005-02-20 17:26 Sebastian Fabrycki
@ 2005-02-23 16:22 ` John Stoffel
0 siblings, 0 replies; 5+ messages in thread
From: John Stoffel @ 2005-02-23 16:22 UTC (permalink / raw)
To: Sebastian Fabrycki; +Cc: linux-kernel
Sebastian,
Try upgrading to 2.6.11-rc2-mm4 or newer, I've had better luck with my
USB/Firewire external case on there. Just make sure you don't turn on
usb-storage logging, it's way too verbose for general use!
John
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2005-02-23 16:22 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-02-20 17:34 USB Storage problem (usb hangs) me
2005-02-21 23:59 ` John Stoffel
2005-02-22 2:37 ` John Stoffel
-- strict thread matches above, loose matches on Subject: below --
2005-02-20 17:26 Sebastian Fabrycki
2005-02-23 16:22 ` John Stoffel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox