[PATCH net-next v2 0/8] net: dsa: microchip: ksz8: refactor FDB dump path

[PATCH net-next v2 0/8] net: dsa: microchip: ksz8: refactor FDB dump path

[Oleksij Rempel]

Refactor FDB dump code path for Microchip KSZ8xxx series. This series
mostly makes some cosmetic reworks and allows to forward errors detected
by the regmap.

Change logs are part of patch commit messages.

Oleksij Rempel (8):
  net: dsa: microchip: Remove unused FDB timestamp support in
    ksz8_r_dyn_mac_table()
  net: dsa: microchip: Make ksz8_r_dyn_mac_table() static
  net: dsa: microchip: ksz8: Refactor ksz8_fdb_dump()
  net: dsa: microchip: ksz8: Refactor ksz8_r_dyn_mac_table() for
    readability
  net: dsa: microchip: ksz8: Unify variable naming in
    ksz8_r_dyn_mac_table()
  net: dsa: microchip: ksz8_r_dyn_mac_table(): ksz: do not return EAGAIN
    on timeout
  net: dsa: microchip: ksz8_r_dyn_mac_table(): return read/write error
    if we got any
  net: dsa: microchip: ksz8_r_dyn_mac_table(): use entries variable to
    signal 0 entries

 drivers/net/dsa/microchip/ksz8.h        |   2 -
 drivers/net/dsa/microchip/ksz8795.c     | 135 ++++++++++++------------
 drivers/net/dsa/microchip/ksz8795_reg.h |   1 +
 3 files changed, 69 insertions(+), 69 deletions(-)

-- 
2.39.2

[PATCH net-next v2 1/8] net: dsa: microchip: Remove unused FDB timestamp support in ksz8_r_dyn_mac_table()

[Oleksij Rempel]

The FDB timestamps are not being utilized. This commit removes the
unused timestamp support from ksz8_r_dyn_mac_table() function.

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa/microchip/ksz8.h    | 2 +-
 drivers/net/dsa/microchip/ksz8795.c | 7 ++-----
 2 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8.h b/drivers/net/dsa/microchip/ksz8.h
index 1a5225264e6a3..5b38cbb7b058b 100644
--- a/drivers/net/dsa/microchip/ksz8.h
+++ b/drivers/net/dsa/microchip/ksz8.h
@@ -20,7 +20,7 @@ void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port);
 int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val);
 int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val);
 int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
-			 u8 *fid, u8 *src_port, u8 *timestamp, u16 *entries);
+			 u8 *fid, u8 *src_port, u16 *entries);
 void ksz8_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt);
 void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
 		    u64 *dropped, u64 *cnt);
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 14923535ca7e8..f59a03e6981d2 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -409,7 +409,7 @@ static int ksz8_valid_dyn_entry(struct ksz_device *dev, u8 *data)
 }
 
 int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
-			 u8 *fid, u8 *src_port, u8 *timestamp, u16 *entries)
+			 u8 *fid, u8 *src_port, u16 *entries)
 {
 	u32 data_hi, data_lo;
 	const u8 *shifts;
@@ -454,8 +454,6 @@ int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
 			shifts[DYNAMIC_MAC_FID];
 		*src_port = (data_hi & masks[DYNAMIC_MAC_TABLE_SRC_PORT]) >>
 			shifts[DYNAMIC_MAC_SRC_PORT];
-		*timestamp = (data_hi & masks[DYNAMIC_MAC_TABLE_TIMESTAMP]) >>
-			shifts[DYNAMIC_MAC_TIMESTAMP];
 
 		mac_addr[5] = (u8)data_lo;
 		mac_addr[4] = (u8)(data_lo >> 8);
@@ -1196,14 +1194,13 @@ int ksz8_fdb_dump(struct ksz_device *dev, int port,
 	int ret = 0;
 	u16 i = 0;
 	u16 entries = 0;
-	u8 timestamp = 0;
 	u8 fid;
 	u8 src_port;
 	u8 mac[ETH_ALEN];
 
 	do {
 		ret = ksz8_r_dyn_mac_table(dev, i, mac, &fid, &src_port,
-					   &timestamp, &entries);
+					   &entries);
 		if (!ret && port == src_port) {
 			ret = cb(mac, fid, false, data);
 			if (ret)
-- 
2.39.2

[PATCH net-next v2 2/8] net: dsa: microchip: Make ksz8_r_dyn_mac_table() static

[Oleksij Rempel]

ksz8_r_dyn_mac_table() is not used outside the source file. Make it
static.

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa/microchip/ksz8.h    | 2 --
 drivers/net/dsa/microchip/ksz8795.c | 4 ++--
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8.h b/drivers/net/dsa/microchip/ksz8.h
index 5b38cbb7b058b..571c26ce71e47 100644
--- a/drivers/net/dsa/microchip/ksz8.h
+++ b/drivers/net/dsa/microchip/ksz8.h
@@ -19,8 +19,6 @@ void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port);
 void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port);
 int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val);
 int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val);
-int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
-			 u8 *fid, u8 *src_port, u16 *entries);
 void ksz8_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt);
 void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
 		    u64 *dropped, u64 *cnt);
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index f59a03e6981d2..e407111db6637 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -408,8 +408,8 @@ static int ksz8_valid_dyn_entry(struct ksz_device *dev, u8 *data)
 	return 0;
 }
 
-int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
-			 u8 *fid, u8 *src_port, u16 *entries)
+static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
+				u8 *fid, u8 *src_port, u16 *entries)
 {
 	u32 data_hi, data_lo;
 	const u8 *shifts;
-- 
2.39.2

[PATCH net-next v2 3/8] net: dsa: microchip: ksz8: Refactor ksz8_fdb_dump()

[Oleksij Rempel]

Refactor ksz8_fdb_dump() to address potential issues:
- Limit the number of iterations to avoid endless loops.
- Handle error codes returned by ksz8_r_dyn_mac_table(), with
  an exception for -ENXIO when no more dynamic entries are detected.

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
changes v2:
- move variable declaration out of "for" scope
- rework "if (port != src_port); continue" to to "if (port == src_port);
  code"
---
 drivers/net/dsa/microchip/ksz8795.c     | 29 ++++++++++++++-----------
 drivers/net/dsa/microchip/ksz8795_reg.h |  1 +
 2 files changed, 17 insertions(+), 13 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index e407111db6637..c93eb351ab3d5 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -1191,27 +1191,30 @@ void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port)
 int ksz8_fdb_dump(struct ksz_device *dev, int port,
 		  dsa_fdb_dump_cb_t *cb, void *data)
 {
-	int ret = 0;
-	u16 i = 0;
-	u16 entries = 0;
-	u8 fid;
-	u8 src_port;
 	u8 mac[ETH_ALEN];
+	u8 src_port, fid;
+	u16 entries = 0;
+	int ret, i;
 
-	do {
+	for (i = 0; i < KSZ8_DYN_MAC_ENTRIES; i++) {
 		ret = ksz8_r_dyn_mac_table(dev, i, mac, &fid, &src_port,
 					   &entries);
-		if (!ret && port == src_port) {
+		if (ret == -ENXIO)
+			return 0;
+		if (ret)
+			return ret;
+
+		if (i >= entries)
+			return 0;
+
+		if (port == src_port) {
 			ret = cb(mac, fid, false, data);
 			if (ret)
-				break;
+				return ret;
 		}
-		i++;
-	} while (i < entries);
-	if (i >= entries)
-		ret = 0;
+	}
 
-	return ret;
+	return 0;
 }
 
 static int ksz8_add_sta_mac(struct ksz_device *dev, int port,
diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h
index 7c9341ef73b03..0d13a6e29b0e6 100644
--- a/drivers/net/dsa/microchip/ksz8795_reg.h
+++ b/drivers/net/dsa/microchip/ksz8795_reg.h
@@ -794,5 +794,6 @@
 #define TAIL_TAG_LOOKUP			BIT(7)
 
 #define FID_ENTRIES			128
+#define KSZ8_DYN_MAC_ENTRIES		1024
 
 #endif
-- 
2.39.2

[PATCH net-next v2 4/8] net: dsa: microchip: ksz8: Refactor ksz8_r_dyn_mac_table() for readability

[Oleksij Rempel]

Move the code out of a long if statement scope in ksz8_r_dyn_mac_table()
to improve code readability.

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa/microchip/ksz8795.c | 60 +++++++++++++++--------------
 1 file changed, 31 insertions(+), 29 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index c93eb351ab3d5..d258fb607b4af 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -416,7 +416,9 @@ static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
 	const u32 *masks;
 	const u16 *regs;
 	u16 ctrl_addr;
+	u64 buf = 0;
 	u8 data;
+	int cnt;
 	int rc;
 
 	shifts = dev->info->shifts;
@@ -432,38 +434,38 @@ static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
 	if (rc == -EAGAIN) {
 		if (addr == 0)
 			*entries = 0;
+		goto unlock_alu;
 	} else if (rc == -ENXIO) {
 		*entries = 0;
-	/* At least one valid entry in the table. */
-	} else {
-		u64 buf = 0;
-		int cnt;
-
-		ksz_read64(dev, regs[REG_IND_DATA_HI], &buf);
-		data_hi = (u32)(buf >> 32);
-		data_lo = (u32)buf;
-
-		/* Check out how many valid entry in the table. */
-		cnt = data & masks[DYNAMIC_MAC_TABLE_ENTRIES_H];
-		cnt <<= shifts[DYNAMIC_MAC_ENTRIES_H];
-		cnt |= (data_hi & masks[DYNAMIC_MAC_TABLE_ENTRIES]) >>
-			shifts[DYNAMIC_MAC_ENTRIES];
-		*entries = cnt + 1;
-
-		*fid = (data_hi & masks[DYNAMIC_MAC_TABLE_FID]) >>
-			shifts[DYNAMIC_MAC_FID];
-		*src_port = (data_hi & masks[DYNAMIC_MAC_TABLE_SRC_PORT]) >>
-			shifts[DYNAMIC_MAC_SRC_PORT];
-
-		mac_addr[5] = (u8)data_lo;
-		mac_addr[4] = (u8)(data_lo >> 8);
-		mac_addr[3] = (u8)(data_lo >> 16);
-		mac_addr[2] = (u8)(data_lo >> 24);
-
-		mac_addr[1] = (u8)data_hi;
-		mac_addr[0] = (u8)(data_hi >> 8);
-		rc = 0;
+		goto unlock_alu;
 	}
+
+	ksz_read64(dev, regs[REG_IND_DATA_HI], &buf);
+	data_hi = (u32)(buf >> 32);
+	data_lo = (u32)buf;
+
+	/* Check out how many valid entry in the table. */
+	cnt = data & masks[DYNAMIC_MAC_TABLE_ENTRIES_H];
+	cnt <<= shifts[DYNAMIC_MAC_ENTRIES_H];
+	cnt |= (data_hi & masks[DYNAMIC_MAC_TABLE_ENTRIES]) >>
+		shifts[DYNAMIC_MAC_ENTRIES];
+	*entries = cnt + 1;
+
+	*fid = (data_hi & masks[DYNAMIC_MAC_TABLE_FID]) >>
+		shifts[DYNAMIC_MAC_FID];
+	*src_port = (data_hi & masks[DYNAMIC_MAC_TABLE_SRC_PORT]) >>
+		shifts[DYNAMIC_MAC_SRC_PORT];
+
+	mac_addr[5] = (u8)data_lo;
+	mac_addr[4] = (u8)(data_lo >> 8);
+	mac_addr[3] = (u8)(data_lo >> 16);
+	mac_addr[2] = (u8)(data_lo >> 24);
+
+	mac_addr[1] = (u8)data_hi;
+	mac_addr[0] = (u8)(data_hi >> 8);
+	rc = 0;
+
+unlock_alu:
 	mutex_unlock(&dev->alu_mutex);
 
 	return rc;
-- 
2.39.2

[PATCH net-next v2 5/8] net: dsa: microchip: ksz8: Unify variable naming in ksz8_r_dyn_mac_table()

[Oleksij Rempel]

Use 'ret' instead of 'rc' in ksz8_r_dyn_mac_table() to maintain
consistency with the rest of the file.

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa/microchip/ksz8795.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index d258fb607b4af..5765d23bc6edc 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -419,7 +419,7 @@ static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
 	u64 buf = 0;
 	u8 data;
 	int cnt;
-	int rc;
+	int ret;
 
 	shifts = dev->info->shifts;
 	masks = dev->info->masks;
@@ -430,12 +430,12 @@ static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
 	mutex_lock(&dev->alu_mutex);
 	ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
 
-	rc = ksz8_valid_dyn_entry(dev, &data);
-	if (rc == -EAGAIN) {
+	ret = ksz8_valid_dyn_entry(dev, &data);
+	if (ret == -EAGAIN) {
 		if (addr == 0)
 			*entries = 0;
 		goto unlock_alu;
-	} else if (rc == -ENXIO) {
+	} else if (ret == -ENXIO) {
 		*entries = 0;
 		goto unlock_alu;
 	}
@@ -463,12 +463,12 @@ static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
 
 	mac_addr[1] = (u8)data_hi;
 	mac_addr[0] = (u8)(data_hi >> 8);
-	rc = 0;
+	ret = 0;
 
 unlock_alu:
 	mutex_unlock(&dev->alu_mutex);
 
-	return rc;
+	return ret;
 }
 
 static int ksz8_r_sta_mac_table(struct ksz_device *dev, u16 addr,
-- 
2.39.2

[PATCH net-next v2 6/8] net: dsa: microchip: ksz8_r_dyn_mac_table(): ksz: do not return EAGAIN on timeout

[Oleksij Rempel]

EAGAIN was not used by previous code and not used by  current code. So,
remove it and use proper error value.

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa/microchip/ksz8795.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 5765d23bc6edc..eeb32df0939d1 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -396,7 +396,7 @@ static int ksz8_valid_dyn_entry(struct ksz_device *dev, u8 *data)
 
 	/* Entry is not ready for accessing. */
 	if (*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) {
-		return -EAGAIN;
+		return -ETIMEDOUT;
 	/* Entry is ready for accessing. */
 	} else {
 		ksz_read8(dev, regs[REG_IND_DATA_8], data);
@@ -431,15 +431,14 @@ static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
 	ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
 
 	ret = ksz8_valid_dyn_entry(dev, &data);
-	if (ret == -EAGAIN) {
-		if (addr == 0)
-			*entries = 0;
-		goto unlock_alu;
-	} else if (ret == -ENXIO) {
+	if (ret == -ENXIO) {
 		*entries = 0;
 		goto unlock_alu;
 	}
 
+	if (ret)
+		goto unlock_alu;
+
 	ksz_read64(dev, regs[REG_IND_DATA_HI], &buf);
 	data_hi = (u32)(buf >> 32);
 	data_lo = (u32)buf;
-- 
2.39.2

[PATCH net-next v2 7/8] net: dsa: microchip: ksz8_r_dyn_mac_table(): return read/write error if we got any

[Oleksij Rempel]

The read/write path may fail. So, return error if we got it.

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa/microchip/ksz8795.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index eeb32df0939d1..de3d8357da855 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -385,12 +385,16 @@ static int ksz8_valid_dyn_entry(struct ksz_device *dev, u8 *data)
 	int timeout = 100;
 	const u32 *masks;
 	const u16 *regs;
+	int ret;
 
 	masks = dev->info->masks;
 	regs = dev->info->regs;
 
 	do {
-		ksz_read8(dev, regs[REG_IND_DATA_CHECK], data);
+		ret = ksz_read8(dev, regs[REG_IND_DATA_CHECK], data);
+		if (ret)
+			return ret;
+
 		timeout--;
 	} while ((*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) && timeout);
 
@@ -399,7 +403,9 @@ static int ksz8_valid_dyn_entry(struct ksz_device *dev, u8 *data)
 		return -ETIMEDOUT;
 	/* Entry is ready for accessing. */
 	} else {
-		ksz_read8(dev, regs[REG_IND_DATA_8], data);
+		ret = ksz_read8(dev, regs[REG_IND_DATA_8], data);
+		if (ret)
+			return ret;
 
 		/* There is no valid entry in the table. */
 		if (*data & masks[DYNAMIC_MAC_TABLE_MAC_EMPTY])
@@ -428,7 +434,9 @@ static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
 	ctrl_addr = IND_ACC_TABLE(TABLE_DYNAMIC_MAC | TABLE_READ) | addr;
 
 	mutex_lock(&dev->alu_mutex);
-	ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+	ret = ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+	if (ret)
+		goto unlock_alu;
 
 	ret = ksz8_valid_dyn_entry(dev, &data);
 	if (ret == -ENXIO) {
@@ -439,7 +447,10 @@ static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
 	if (ret)
 		goto unlock_alu;
 
-	ksz_read64(dev, regs[REG_IND_DATA_HI], &buf);
+	ret = ksz_read64(dev, regs[REG_IND_DATA_HI], &buf);
+	if (ret)
+		goto unlock_alu;
+
 	data_hi = (u32)(buf >> 32);
 	data_lo = (u32)buf;
 
@@ -462,7 +473,6 @@ static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
 
 	mac_addr[1] = (u8)data_hi;
 	mac_addr[0] = (u8)(data_hi >> 8);
-	ret = 0;
 
 unlock_alu:
 	mutex_unlock(&dev->alu_mutex);
-- 
2.39.2

[PATCH net-next v2 8/8] net: dsa: microchip: ksz8_r_dyn_mac_table(): use entries variable to signal 0 entries

[Oleksij Rempel]

We already have a variable to provide number of entries. So use it,
instead of using error number.

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa/microchip/ksz8795.c | 24 +++++++-----------------
 1 file changed, 7 insertions(+), 17 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index de3d8357da855..ecef6f6f830b3 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -399,19 +399,11 @@ static int ksz8_valid_dyn_entry(struct ksz_device *dev, u8 *data)
 	} while ((*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) && timeout);
 
 	/* Entry is not ready for accessing. */
-	if (*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) {
+	if (*data & masks[DYNAMIC_MAC_TABLE_NOT_READY])
 		return -ETIMEDOUT;
-	/* Entry is ready for accessing. */
-	} else {
-		ret = ksz_read8(dev, regs[REG_IND_DATA_8], data);
-		if (ret)
-			return ret;
 
-		/* There is no valid entry in the table. */
-		if (*data & masks[DYNAMIC_MAC_TABLE_MAC_EMPTY])
-			return -ENXIO;
-	}
-	return 0;
+	/* Entry is ready for accessing. */
+	return ksz_read8(dev, regs[REG_IND_DATA_8], data);
 }
 
 static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
@@ -439,13 +431,13 @@ static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
 		goto unlock_alu;
 
 	ret = ksz8_valid_dyn_entry(dev, &data);
-	if (ret == -ENXIO) {
-		*entries = 0;
+	if (ret)
 		goto unlock_alu;
-	}
 
-	if (ret)
+	if (data & masks[DYNAMIC_MAC_TABLE_MAC_EMPTY]) {
+		*entries = 0;
 		goto unlock_alu;
+	}
 
 	ret = ksz_read64(dev, regs[REG_IND_DATA_HI], &buf);
 	if (ret)
@@ -1210,8 +1202,6 @@ int ksz8_fdb_dump(struct ksz_device *dev, int port,
 	for (i = 0; i < KSZ8_DYN_MAC_ENTRIES; i++) {
 		ret = ksz8_r_dyn_mac_table(dev, i, mac, &fid, &src_port,
 					   &entries);
-		if (ret == -ENXIO)
-			return 0;
 		if (ret)
 			return ret;
 
-- 
2.39.2

Re: [PATCH net-next v2 1/8] net: dsa: microchip: Remove unused FDB timestamp support in ksz8_r_dyn_mac_table()

[Florian Fainelli]

On 4/3/2024 5:50 AM, Oleksij Rempel wrote:
> The FDB timestamps are not being utilized. This commit removes the
> unused timestamp support from ksz8_r_dyn_mac_table() function.
> 
> Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH net-next v2 2/8] net: dsa: microchip: Make ksz8_r_dyn_mac_table() static

[Florian Fainelli]

On 4/3/2024 5:50 AM, Oleksij Rempel wrote:
> ksz8_r_dyn_mac_table() is not used outside the source file. Make it
> static.
> 
> Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH net-next v2 3/8] net: dsa: microchip: ksz8: Refactor ksz8_fdb_dump()

[Florian Fainelli]

On 4/3/2024 5:50 AM, Oleksij Rempel wrote:
> Refactor ksz8_fdb_dump() to address potential issues:
> - Limit the number of iterations to avoid endless loops.
> - Handle error codes returned by ksz8_r_dyn_mac_table(), with
>    an exception for -ENXIO when no more dynamic entries are detected.
> 
> Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH net-next v2 4/8] net: dsa: microchip: ksz8: Refactor ksz8_r_dyn_mac_table() for readability

[Florian Fainelli]

On 4/3/2024 5:50 AM, Oleksij Rempel wrote:
> Move the code out of a long if statement scope in ksz8_r_dyn_mac_table()
> to improve code readability.
> 
> Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH net-next v2 5/8] net: dsa: microchip: ksz8: Unify variable naming in ksz8_r_dyn_mac_table()

[Florian Fainelli]

On 4/3/2024 5:50 AM, Oleksij Rempel wrote:
> Use 'ret' instead of 'rc' in ksz8_r_dyn_mac_table() to maintain
> consistency with the rest of the file.
> 
> Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH net-next v2 6/8] net: dsa: microchip: ksz8_r_dyn_mac_table(): ksz: do not return EAGAIN on timeout

[Florian Fainelli]

On 4/3/2024 5:50 AM, Oleksij Rempel wrote:
> EAGAIN was not used by previous code and not used by  current code. So,
> remove it and use proper error value.
> 
> Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH net-next v2 7/8] net: dsa: microchip: ksz8_r_dyn_mac_table(): return read/write error if we got any

[Florian Fainelli]

On 4/3/2024 5:50 AM, Oleksij Rempel wrote:
> The read/write path may fail. So, return error if we got it.
> 
> Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH net-next v2 8/8] net: dsa: microchip: ksz8_r_dyn_mac_table(): use entries variable to signal 0 entries

[Florian Fainelli]

On 4/3/2024 5:50 AM, Oleksij Rempel wrote:
> We already have a variable to provide number of entries. So use it,
> instead of using error number.
> 
> Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH net-next v2 3/8] net: dsa: microchip: ksz8: Refactor ksz8_fdb_dump()

[Arun.Ramadoss]

Hi Oleksij,

On Wed, 2024-04-03 at 14:50 +0200, Oleksij Rempel wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you
> know the content is safe
> 
> Refactor ksz8_fdb_dump() to address potential issues:
> - Limit the number of iterations to avoid endless loops.
> - Handle error codes returned by ksz8_r_dyn_mac_table(), with
>   an exception for -ENXIO when no more dynamic entries are detected.
> 
> Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

I believe Signed-off-by tag should be first followed by the
Acked/reviewed tag in the order who reviewed it to indicate
chronological order. Correct me if I am wrong. 

Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>

Re: [PATCH net-next v2 0/8] net: dsa: microchip: ksz8: refactor FDB dump path

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@kernel.org>:

On Wed,  3 Apr 2024 14:50:31 +0200 you wrote:
> Refactor FDB dump code path for Microchip KSZ8xxx series. This series
> mostly makes some cosmetic reworks and allows to forward errors detected
> by the regmap.
> 
> Change logs are part of patch commit messages.
> 
> Oleksij Rempel (8):
>   net: dsa: microchip: Remove unused FDB timestamp support in
>     ksz8_r_dyn_mac_table()
>   net: dsa: microchip: Make ksz8_r_dyn_mac_table() static
>   net: dsa: microchip: ksz8: Refactor ksz8_fdb_dump()
>   net: dsa: microchip: ksz8: Refactor ksz8_r_dyn_mac_table() for
>     readability
>   net: dsa: microchip: ksz8: Unify variable naming in
>     ksz8_r_dyn_mac_table()
>   net: dsa: microchip: ksz8_r_dyn_mac_table(): ksz: do not return EAGAIN
>     on timeout
>   net: dsa: microchip: ksz8_r_dyn_mac_table(): return read/write error
>     if we got any
>   net: dsa: microchip: ksz8_r_dyn_mac_table(): use entries variable to
>     signal 0 entries
> 
> [...]

Here is the summary with links:
  - [net-next,v2,1/8] net: dsa: microchip: Remove unused FDB timestamp support in ksz8_r_dyn_mac_table()
    https://git.kernel.org/netdev/net-next/c/a4a0306fbe1c
  - [net-next,v2,2/8] net: dsa: microchip: Make ksz8_r_dyn_mac_table() static
    https://git.kernel.org/netdev/net-next/c/860cf29eabf1
  - [net-next,v2,3/8] net: dsa: microchip: ksz8: Refactor ksz8_fdb_dump()
    https://git.kernel.org/netdev/net-next/c/0499bb09f412
  - [net-next,v2,4/8] net: dsa: microchip: ksz8: Refactor ksz8_r_dyn_mac_table() for readability
    https://git.kernel.org/netdev/net-next/c/5f1b7f838f5f
  - [net-next,v2,5/8] net: dsa: microchip: ksz8: Unify variable naming in ksz8_r_dyn_mac_table()
    https://git.kernel.org/netdev/net-next/c/08736e083e4b
  - [net-next,v2,6/8] net: dsa: microchip: ksz8_r_dyn_mac_table(): ksz: do not return EAGAIN on timeout
    https://git.kernel.org/netdev/net-next/c/081e84f267ad
  - [net-next,v2,7/8] net: dsa: microchip: ksz8_r_dyn_mac_table(): return read/write error if we got any
    https://git.kernel.org/netdev/net-next/c/7caed786b374
  - [net-next,v2,8/8] net: dsa: microchip: ksz8_r_dyn_mac_table(): use entries variable to signal 0 entries
    https://git.kernel.org/netdev/net-next/c/8d5758120dd2

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html