Re: [PATCH net-next v6 0/3] Introduce switch mode support for ICSSG driver

[patchwork-bot+netdevbpf@kernel.org]

Hello:

This series was applied to netdev/net-next.git (main)
by Paolo Abeni <pabeni@redhat.com>:

On Tue, 28 May 2024 17:07:31 +0530 you wrote:
> This series adds support for switch-mode for ICSSG driver. This series
> also introduces helper APIs to configure firmware maintained FDB
> (Forwarding Database) and VLAN tables. These APIs are later used by ICSSG
> driver in switch mode.
> 
> Now the driver will boot by default in dual EMAC mode. When first ICSSG
> interface is added to bridge driver will still be in EMAC mode. As soon as
> second ICSSG interface is added to same bridge, switch-mode will be
> enabled and switch firmwares will be loaded to PRU cores. The driver will
> remain in dual EMAC mode if ICSSG interfaces are added to two different
> bridges or if two different interfaces (One ICSSG, one other) is added to
> the same bridge. We'll only enable is_switch_mode flag when two ICSSG
> interfaces are added to same bridge.
> 
> [...]

Here is the summary with links:
  - [net-next,v6,1/3] net: ti: icssg-prueth: Add helper functions to configure FDB
    https://git.kernel.org/netdev/net-next/c/487f7323f39a
  - [net-next,v6,2/3] net: ti: icssg-switch: Add switchdev based driver for ethernet switch support
    https://git.kernel.org/netdev/net-next/c/972383aecf43
  - [net-next,v6,3/3] net: ti: icssg-prueth: Add support for ICSSG switch firmware
    https://git.kernel.org/netdev/net-next/c/abd5576b9c57

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html