From: Saurabh Sengar <ssengar@linux.microsoft.com>
To: kys@microsoft.com, haiyangz@microsoft.com, wei.liu@kernel.org,
decui@microsoft.com, linux-hyperv@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: ssengar@microsoft.com, srivatsa@csail.mit.edu
Subject: [PATCH] Drivers: hv: vmbus: Deferring per cpu tasks
Date: Wed, 24 Jul 2024 22:26:04 -0700 [thread overview]
Message-ID: <1721885164-6962-1-git-send-email-ssengar@linux.microsoft.com> (raw)
Currently on a very large system with 1780 CPUs, hv_acpi_init takes
around 3 seconds to complete for all the CPUs. This is because of
sequential synic initialization for each CPU.
Defer these tasks so that each CPU executes hv_acpi_init in parallel
to take full advantage of multiple CPUs.
This solution saves around 2 seconds of boot time on a 1780 CPU system,
that around 66% improvement in the existing logic.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
---
drivers/hv/vmbus_drv.c | 33 ++++++++++++++++++++++++++++++---
1 file changed, 30 insertions(+), 3 deletions(-)
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index c857dc3975be..3395526ad0d0 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -1306,6 +1306,13 @@ static irqreturn_t vmbus_percpu_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static void vmbus_percpu_work(struct work_struct *work)
+{
+ unsigned int cpu = smp_processor_id();
+
+ hv_synic_init(cpu);
+}
+
/*
* vmbus_bus_init -Main vmbus driver initialization routine.
*
@@ -1316,7 +1323,8 @@ static irqreturn_t vmbus_percpu_isr(int irq, void *dev_id)
*/
static int vmbus_bus_init(void)
{
- int ret;
+ int ret, cpu;
+ struct work_struct __percpu *works;
ret = hv_init();
if (ret != 0) {
@@ -1355,12 +1363,31 @@ static int vmbus_bus_init(void)
if (ret)
goto err_alloc;
+ works = alloc_percpu(struct work_struct);
+ if (!works) {
+ ret = -ENOMEM;
+ goto err_alloc;
+ }
+
/*
* Initialize the per-cpu interrupt state and stimer state.
* Then connect to the host.
*/
- ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "hyperv/vmbus:online",
- hv_synic_init, hv_synic_cleanup);
+ cpus_read_lock();
+ for_each_online_cpu(cpu) {
+ struct work_struct *work = per_cpu_ptr(works, cpu);
+
+ INIT_WORK(work, vmbus_percpu_work);
+ schedule_work_on(cpu, work);
+ }
+
+ for_each_online_cpu(cpu)
+ flush_work(per_cpu_ptr(works, cpu));
+
+ ret = __cpuhp_setup_state_cpuslocked(CPUHP_AP_ONLINE_DYN, "hyperv/vmbus:online", false,
+ hv_synic_init, hv_synic_cleanup, false);
+ cpus_read_unlock();
+ free_percpu(works);
if (ret < 0)
goto err_alloc;
hyperv_cpuhp_online = ret;
--
2.43.0
next reply other threads:[~2024-07-25 5:26 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-25 5:26 Saurabh Sengar [this message]
2024-07-25 15:23 ` [PATCH] Drivers: hv: vmbus: Deferring per cpu tasks Nuno Das Neves
2024-07-25 15:35 ` Saurabh Singh Sengar
2024-07-26 0:01 ` Dexuan Cui
2024-07-26 5:26 ` Saurabh Singh Sengar
2024-07-26 6:02 ` Dexuan Cui
2024-07-26 6:34 ` Srivatsa S. Bhat
2024-07-26 11:26 ` Saurabh Singh Sengar
2024-07-27 12:53 ` Srivatsa S. Bhat
2024-07-28 4:32 ` Michael Kelley
2024-07-28 9:18 ` Saurabh Singh Sengar
2024-07-28 14:06 ` Michael Kelley
2024-07-28 15:40 ` Saurabh Singh Sengar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1721885164-6962-1-git-send-email-ssengar@linux.microsoft.com \
--to=ssengar@linux.microsoft.com \
--cc=decui@microsoft.com \
--cc=haiyangz@microsoft.com \
--cc=kys@microsoft.com \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=srivatsa@csail.mit.edu \
--cc=ssengar@microsoft.com \
--cc=wei.liu@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox