From: Shradha Gupta <shradhagupta@linux.microsoft.com>
To: linux-hyperv@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-rdma@vger.kernel.org
Cc: Shradha Gupta <shradhagupta@linux.microsoft.com>,
"K. Y. Srinivasan" <kys@microsoft.com>,
Haiyang Zhang <haiyangz@microsoft.com>,
Wei Liu <wei.liu@kernel.org>, Dexuan Cui <decui@microsoft.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Long Li <longli@microsoft.com>, Simon Horman <horms@kernel.org>,
Konstantin Taranov <kotaranov@microsoft.com>,
Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>,
Erick Archer <erick.archer@outlook.com>,
Pavan Chebbi <pavan.chebbi@broadcom.com>,
Ahmed Zaki <ahmed.zaki@intel.com>,
Colin Ian King <colin.i.king@gmail.com>,
Shradha Gupta <shradhagupta@microsoft.com>
Subject: [PATCH net-next v2] net: mana: Improve mana_set_channels() in low mem conditions
Date: Sun, 1 Sep 2024 20:45:34 -0700 [thread overview]
Message-ID: <1725248734-21760-1-git-send-email-shradhagupta@linux.microsoft.com> (raw)
The mana_set_channels() function requires detaching the mana
driver and reattaching it with changed channel values.
During this operation if the system is low on memory, the reattach
might fail, causing the network device being down.
To avoid this we pre-allocate buffers at the beginning of set operation,
to prevent complete network loss
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
---
Changes in v2
* Pass num_queues as argument in mana_pre_alloc_rxbufs()
---
drivers/net/ethernet/microsoft/mana/mana_en.c | 6 ++--
.../ethernet/microsoft/mana/mana_ethtool.c | 28 ++++++++++---------
include/net/mana/mana.h | 2 +-
3 files changed, 19 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/microsoft/mana/mana_en.c b/drivers/net/ethernet/microsoft/mana/mana_en.c
index 3e865985340e..a174ca719aba 100644
--- a/drivers/net/ethernet/microsoft/mana/mana_en.c
+++ b/drivers/net/ethernet/microsoft/mana/mana_en.c
@@ -608,7 +608,7 @@ static void mana_get_rxbuf_cfg(int mtu, u32 *datasize, u32 *alloc_size,
*datasize = mtu + ETH_HLEN;
}
-int mana_pre_alloc_rxbufs(struct mana_port_context *mpc, int new_mtu)
+int mana_pre_alloc_rxbufs(struct mana_port_context *mpc, int new_mtu, int num_queues)
{
struct device *dev;
struct page *page;
@@ -622,7 +622,7 @@ int mana_pre_alloc_rxbufs(struct mana_port_context *mpc, int new_mtu)
dev = mpc->ac->gdma_dev->gdma_context->dev;
- num_rxb = mpc->num_queues * mpc->rx_queue_size;
+ num_rxb = num_queues * mpc->rx_queue_size;
WARN(mpc->rxbufs_pre, "mana rxbufs_pre exists\n");
mpc->rxbufs_pre = kmalloc_array(num_rxb, sizeof(void *), GFP_KERNEL);
@@ -682,7 +682,7 @@ static int mana_change_mtu(struct net_device *ndev, int new_mtu)
int err;
/* Pre-allocate buffers to prevent failure in mana_attach later */
- err = mana_pre_alloc_rxbufs(mpc, new_mtu);
+ err = mana_pre_alloc_rxbufs(mpc, new_mtu, mpc->num_queues);
if (err) {
netdev_err(ndev, "Insufficient memory for new MTU\n");
return err;
diff --git a/drivers/net/ethernet/microsoft/mana/mana_ethtool.c b/drivers/net/ethernet/microsoft/mana/mana_ethtool.c
index d6a35fbda447..dc3864377538 100644
--- a/drivers/net/ethernet/microsoft/mana/mana_ethtool.c
+++ b/drivers/net/ethernet/microsoft/mana/mana_ethtool.c
@@ -345,27 +345,29 @@ static int mana_set_channels(struct net_device *ndev,
struct mana_port_context *apc = netdev_priv(ndev);
unsigned int new_count = channels->combined_count;
unsigned int old_count = apc->num_queues;
- int err, err2;
+ int err;
+
+ err = mana_pre_alloc_rxbufs(apc, ndev->mtu, new_count);
+ if (err) {
+ netdev_err(ndev, "Insufficient memory for new allocations");
+ return err;
+ }
err = mana_detach(ndev, false);
if (err) {
netdev_err(ndev, "mana_detach failed: %d\n", err);
- return err;
+ goto out;
}
apc->num_queues = new_count;
err = mana_attach(ndev);
- if (!err)
- return 0;
-
- netdev_err(ndev, "mana_attach failed: %d\n", err);
-
- /* Try to roll it back to the old configuration. */
- apc->num_queues = old_count;
- err2 = mana_attach(ndev);
- if (err2)
- netdev_err(ndev, "mana re-attach failed: %d\n", err2);
+ if (err) {
+ apc->num_queues = old_count;
+ netdev_err(ndev, "mana_attach failed: %d\n", err);
+ }
+out:
+ mana_pre_dealloc_rxbufs(apc);
return err;
}
@@ -414,7 +416,7 @@ static int mana_set_ringparam(struct net_device *ndev,
/* pre-allocating new buffers to prevent failures in mana_attach() later */
apc->rx_queue_size = new_rx;
- err = mana_pre_alloc_rxbufs(apc, ndev->mtu);
+ err = mana_pre_alloc_rxbufs(apc, ndev->mtu, apc->num_queues);
apc->rx_queue_size = old_rx;
if (err) {
netdev_err(ndev, "Insufficient memory for new allocations\n");
diff --git a/include/net/mana/mana.h b/include/net/mana/mana.h
index 1f869624811d..dfbf78d4e557 100644
--- a/include/net/mana/mana.h
+++ b/include/net/mana/mana.h
@@ -488,7 +488,7 @@ struct bpf_prog *mana_xdp_get(struct mana_port_context *apc);
void mana_chn_setxdp(struct mana_port_context *apc, struct bpf_prog *prog);
int mana_bpf(struct net_device *ndev, struct netdev_bpf *bpf);
void mana_query_gf_stats(struct mana_port_context *apc);
-int mana_pre_alloc_rxbufs(struct mana_port_context *apc, int mtu);
+int mana_pre_alloc_rxbufs(struct mana_port_context *apc, int mtu, int num_queues);
void mana_pre_dealloc_rxbufs(struct mana_port_context *apc);
extern const struct ethtool_ops mana_ethtool_ops;
--
2.34.1
next reply other threads:[~2024-09-02 3:45 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-02 3:45 Shradha Gupta [this message]
2024-09-04 19:05 ` [PATCH net-next v2] net: mana: Improve mana_set_channels() in low mem conditions Gerhard Engleder
2024-09-04 19:33 ` Haiyang Zhang
2024-09-04 23:40 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1725248734-21760-1-git-send-email-shradhagupta@linux.microsoft.com \
--to=shradhagupta@linux.microsoft.com \
--cc=ahmed.zaki@intel.com \
--cc=colin.i.king@gmail.com \
--cc=davem@davemloft.net \
--cc=decui@microsoft.com \
--cc=edumazet@google.com \
--cc=erick.archer@outlook.com \
--cc=haiyangz@microsoft.com \
--cc=horms@kernel.org \
--cc=kotaranov@microsoft.com \
--cc=kuba@kernel.org \
--cc=kys@microsoft.com \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=longli@microsoft.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=pavan.chebbi@broadcom.com \
--cc=schakrabarti@linux.microsoft.com \
--cc=shradhagupta@microsoft.com \
--cc=wei.liu@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox