Re: [PATCH v7 3/7] dt-bindings: iio: accel: adxl345: add interrupt-names

["Rob Herring (Arm)" <robh@kernel.org>]

On Fri, 13 Dec 2024 21:19:05 +0000, Lothar Rubusch wrote:
> Add interrupt-names INT1 and INT2 for the two interrupt lines of the
> sensor.
> 
> When one of the two interrupt lines is connected, the interrupt as its
> interrupt-name, need to be declared in the devicetree. The driver then
> configures the sensor to indicate its events on either INT1 or INT2.
> 
> If no interrupt is configured, then no interrupt-name should be
> configured, and vice versa. In this case the sensor runs in FIFO BYPASS
> mode. This allows sensor measurements, but none of the sensor events.
> 
> Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
> ---
>  .../devicetree/bindings/iio/accel/adi,adxl345.yaml     | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml:45:17: [error] string value is redundantly quoted with any quotes (quoted-strings)
./Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml:46:22: [error] string value is redundantly quoted with any quotes (quoted-strings)

dtschema/dtc warnings/errors:

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241213211909.40896-4-l.rubusch@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.