* [PATCH] Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922
@ 2025-04-30 23:50 青叶 西城
2025-05-15 17:10 ` patchwork-bot+bluetooth
0 siblings, 1 reply; 6+ messages in thread
From: 青叶 西城 @ 2025-04-30 23:50 UTC (permalink / raw)
To: Marcel Holtmann,
Marcel Holtmann <marcel@holtmann.org>" --to="Luiz Augusto von Dentz
Cc: linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org
From dcb763edda3fd9f3fdb6525b07072fdd136d713a Mon Sep 17 00:00:00 2001
From: Liwei Sun <sunliwei2015s@outlook.com>
Date: Thu, 1 May 2025 06:18:50 +0800
Subject: [PATCH] Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922
A new variant of MT7922 wireless device has been identified.
The device introduces itself as MEDIATEK MT7922,
so treat it as MediaTek device.
With this patch, btusb driver works as expected:
[ 3.151162] Bluetooth: Core ver 2.22
[ 3.151185] Bluetooth: HCI device and connection manager initialized
[ 3.151189] Bluetooth: HCI socket layer initialized
[ 3.151191] Bluetooth: L2CAP socket layer initialized
[ 3.151194] Bluetooth: SCO socket layer initialized
[ 3.295718] Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20241106163512
[ 4.676634] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.676637] Bluetooth: BNEP filters: protocol multicast
[ 4.676640] Bluetooth: BNEP socket layer initialized
[ 5.560453] Bluetooth: hci0: Device setup in 2320660 usecs
[ 5.560457] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 5.619197] Bluetooth: hci0: AOSP extensions version v1.00
[ 5.619204] Bluetooth: hci0: AOSP quality report is supported
[ 5.619301] Bluetooth: MGMT ver 1.23
[ 6.741247] Bluetooth: RFCOMM TTY layer initialized
[ 6.741258] Bluetooth: RFCOMM socket layer initialized
[ 6.741261] Bluetooth: RFCOMM ver 1.11
lspci output:
04:00.0 Network controller: MEDIATEK Corp. MT7922 802.11ax PCI Express Wireless Network Adapter
USB information:
T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3584 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
Signed-off-by: Liwei Sun <sunliwei2015s@outlook.com>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 5012b5ff92c8..9850272e83ef 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -678,6 +678,8 @@ static const struct usb_device_id quirks_table[] = {
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3568), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x13d3, 0x3584), .driver_info = BTUSB_MEDIATEK |
+ BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3605), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3607), .driver_info = BTUSB_MEDIATEK |
--
2.49.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH] Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922
@ 2025-05-12 2:31 Liwei Sun
2025-05-12 21:37 ` Luiz Augusto von Dentz
0 siblings, 1 reply; 6+ messages in thread
From: Liwei Sun @ 2025-05-12 2:31 UTC (permalink / raw)
To: Marcel Holtmann, Luiz Augusto von Dentz; +Cc: linux-bluetooth, linux-kernel
Apologies for this re-send. It appears my previous attempt to send this patch did not successfully reach the mailing lists (linux-bluetooth@vger.kernel.org and linux-kernel@vger.kernel.org), although some maintainers may have received it directly.
I am resending it now to ensure it is properly distributed to the lists for review and discussion.
If this one still fails, I may try another way to report the new hardware ID.
From 4bee2ec5648c48ec5fe62b230caf26985398b0e0 Mon Sep 17 00:00:00 2001
From: Liwei Sun <sunliweis@126.com>
Date: Thu, 1 May 2025 17:27:59 +0800
Subject: [PATCH] Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922
A new variant of MT7922 wireless device has been identified.
The device introduces itself as MEDIATEK MT7922,
so treat it as MediaTek device.
With this patch, btusb driver works as expected:
[ 3.151162] Bluetooth: Core ver 2.22
[ 3.151185] Bluetooth: HCI device and connection manager initialized
[ 3.151189] Bluetooth: HCI socket layer initialized
[ 3.151191] Bluetooth: L2CAP socket layer initialized
[ 3.151194] Bluetooth: SCO socket layer initialized
[ 3.295718] Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20241106163512
[ 4.676634] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.676637] Bluetooth: BNEP filters: protocol multicast
[ 4.676640] Bluetooth: BNEP socket layer initialized
[ 5.560453] Bluetooth: hci0: Device setup in 2320660 usecs
[ 5.560457] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 5.619197] Bluetooth: hci0: AOSP extensions version v1.00
[ 5.619204] Bluetooth: hci0: AOSP quality report is supported
[ 5.619301] Bluetooth: MGMT ver 1.23
[ 6.741247] Bluetooth: RFCOMM TTY layer initialized
[ 6.741258] Bluetooth: RFCOMM socket layer initialized
[ 6.741261] Bluetooth: RFCOMM ver 1.11
lspci output:
04:00.0 Network controller: MEDIATEK Corp. MT7922 802.11ax PCI Express Wireless Network Adapter
USB information:
T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3584 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
Signed-off-by: Liwei Sun <sunliweis@126.com>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 5012b5ff92c8..9850272e83ef 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -678,6 +678,8 @@ static const struct usb_device_id quirks_table[] = {
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3568), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x13d3, 0x3584), .driver_info = BTUSB_MEDIATEK |
+ BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3605), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3607), .driver_info = BTUSB_MEDIATEK |
--
2.49.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922
2025-05-12 2:31 Liwei Sun
@ 2025-05-12 21:37 ` Luiz Augusto von Dentz
0 siblings, 0 replies; 6+ messages in thread
From: Luiz Augusto von Dentz @ 2025-05-12 21:37 UTC (permalink / raw)
To: Liwei Sun; +Cc: Marcel Holtmann, linux-bluetooth, linux-kernel
Hi Liwei,
On Sun, May 11, 2025 at 10:31 PM Liwei Sun <sunliweis@126.com> wrote:
>
> Apologies for this re-send. It appears my previous attempt to send this patch did not successfully reach the mailing lists (linux-bluetooth@vger.kernel.org and linux-kernel@vger.kernel.org), although some maintainers may have received it directly.
> I am resending it now to ensure it is properly distributed to the lists for review and discussion.
> If this one still fails, I may try another way to report the new hardware ID.
Not properly formatted, use git format-patch + git send-email, see:
https://www.kernel.org/doc/html/v6.15-rc5/process/submitting-patches.html
>
> From 4bee2ec5648c48ec5fe62b230caf26985398b0e0 Mon Sep 17 00:00:00 2001
> From: Liwei Sun <sunliweis@126.com>
> Date: Thu, 1 May 2025 17:27:59 +0800
> Subject: [PATCH] Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922
>
> A new variant of MT7922 wireless device has been identified.
> The device introduces itself as MEDIATEK MT7922,
> so treat it as MediaTek device.
> With this patch, btusb driver works as expected:
> [ 3.151162] Bluetooth: Core ver 2.22
> [ 3.151185] Bluetooth: HCI device and connection manager initialized
> [ 3.151189] Bluetooth: HCI socket layer initialized
> [ 3.151191] Bluetooth: L2CAP socket layer initialized
> [ 3.151194] Bluetooth: SCO socket layer initialized
> [ 3.295718] Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20241106163512
> [ 4.676634] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 4.676637] Bluetooth: BNEP filters: protocol multicast
> [ 4.676640] Bluetooth: BNEP socket layer initialized
> [ 5.560453] Bluetooth: hci0: Device setup in 2320660 usecs
> [ 5.560457] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
> [ 5.619197] Bluetooth: hci0: AOSP extensions version v1.00
> [ 5.619204] Bluetooth: hci0: AOSP quality report is supported
> [ 5.619301] Bluetooth: MGMT ver 1.23
> [ 6.741247] Bluetooth: RFCOMM TTY layer initialized
> [ 6.741258] Bluetooth: RFCOMM socket layer initialized
> [ 6.741261] Bluetooth: RFCOMM ver 1.11
>
> lspci output:
> 04:00.0 Network controller: MEDIATEK Corp. MT7922 802.11ax PCI Express Wireless Network Adapter
>
> USB information:
> T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
> D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=13d3 ProdID=3584 Rev= 1.00
> S: Manufacturer=MediaTek Inc.
> S: Product=Wireless_Device
> S: SerialNumber=000000000
> C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
> A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
> E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
> E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
> I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
>
> Signed-off-by: Liwei Sun <sunliweis@126.com>
> ---
> drivers/bluetooth/btusb.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 5012b5ff92c8..9850272e83ef 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -678,6 +678,8 @@ static const struct usb_device_id quirks_table[] = {
> BTUSB_WIDEBAND_SPEECH },
> { USB_DEVICE(0x13d3, 0x3568), .driver_info = BTUSB_MEDIATEK |
> BTUSB_WIDEBAND_SPEECH },
> + { USB_DEVICE(0x13d3, 0x3584), .driver_info = BTUSB_MEDIATEK |
> + BTUSB_WIDEBAND_SPEECH },
> { USB_DEVICE(0x13d3, 0x3605), .driver_info = BTUSB_MEDIATEK |
> BTUSB_WIDEBAND_SPEECH },
> { USB_DEVICE(0x13d3, 0x3607), .driver_info = BTUSB_MEDIATEK |
> --
> 2.49.0
>
--
Luiz Augusto von Dentz
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922
@ 2025-05-13 6:13 Liwei Sun
2025-05-15 17:10 ` patchwork-bot+bluetooth
0 siblings, 1 reply; 6+ messages in thread
From: Liwei Sun @ 2025-05-13 6:13 UTC (permalink / raw)
To: Marcel Holtmann, Luiz Augusto von Dentz
Cc: linux-bluetooth, linux-kernel, Liwei Sun
A new variant of MT7922 wireless device has been identified.
The device introduces itself as MEDIATEK MT7922,
so treat it as MediaTek device.
With this patch, btusb driver works as expected:
[ 3.151162] Bluetooth: Core ver 2.22
[ 3.151185] Bluetooth: HCI device and connection manager initialized
[ 3.151189] Bluetooth: HCI socket layer initialized
[ 3.151191] Bluetooth: L2CAP socket layer initialized
[ 3.151194] Bluetooth: SCO socket layer initialized
[ 3.295718] Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20241106163512
[ 4.676634] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.676637] Bluetooth: BNEP filters: protocol multicast
[ 4.676640] Bluetooth: BNEP socket layer initialized
[ 5.560453] Bluetooth: hci0: Device setup in 2320660 usecs
[ 5.560457] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 5.619197] Bluetooth: hci0: AOSP extensions version v1.00
[ 5.619204] Bluetooth: hci0: AOSP quality report is supported
[ 5.619301] Bluetooth: MGMT ver 1.23
[ 6.741247] Bluetooth: RFCOMM TTY layer initialized
[ 6.741258] Bluetooth: RFCOMM socket layer initialized
[ 6.741261] Bluetooth: RFCOMM ver 1.11
lspci output:
04:00.0 Network controller: MEDIATEK Corp. MT7922 802.11ax PCI Express Wireless Network Adapter
USB information:
T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3584 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
Signed-off-by: Liwei Sun <sunliweis@126.com>
---
Resending this email due to format issues. Apologies for my previous
mistakes.
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 5012b5ff92c8..9850272e83ef 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -678,6 +678,8 @@ static const struct usb_device_id quirks_table[] = {
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3568), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x13d3, 0x3584), .driver_info = BTUSB_MEDIATEK |
+ BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3605), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3607), .driver_info = BTUSB_MEDIATEK |
base-commit: 7a13c14ee59d4f6c5f4277a86516cbc73a1383a8
--
2.49.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922
2025-04-30 23:50 [PATCH] Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922 青叶 西城
@ 2025-05-15 17:10 ` patchwork-bot+bluetooth
0 siblings, 0 replies; 6+ messages in thread
From: patchwork-bot+bluetooth @ 2025-05-15 17:10 UTC (permalink / raw)
To: =?utf-8?b?6Z2S5Y+2IOilv+WfjiA8c3VubGl3ZWkyMDE1c0BvdXRsb29rLmNvbT4=?=
Cc: marcel, luiz.dentz, linux-bluetooth, linux-kernel
Hello:
This patch was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:
On Wed, 30 Apr 2025 23:50:50 +0000 you wrote:
> From dcb763edda3fd9f3fdb6525b07072fdd136d713a Mon Sep 17 00:00:00 2001
> From: Liwei Sun <sunliwei2015s@outlook.com>
> Date: Thu, 1 May 2025 06:18:50 +0800
> Subject: [PATCH] Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922
>
> A new variant of MT7922 wireless device has been identified.
> The device introduces itself as MEDIATEK MT7922,
> so treat it as MediaTek device.
> With this patch, btusb driver works as expected:
> [ 3.151162] Bluetooth: Core ver 2.22
> [ 3.151185] Bluetooth: HCI device and connection manager initialized
> [ 3.151189] Bluetooth: HCI socket layer initialized
> [ 3.151191] Bluetooth: L2CAP socket layer initialized
> [ 3.151194] Bluetooth: SCO socket layer initialized
> [ 3.295718] Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20241106163512
> [ 4.676634] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 4.676637] Bluetooth: BNEP filters: protocol multicast
> [ 4.676640] Bluetooth: BNEP socket layer initialized
> [ 5.560453] Bluetooth: hci0: Device setup in 2320660 usecs
> [ 5.560457] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
> [ 5.619197] Bluetooth: hci0: AOSP extensions version v1.00
> [ 5.619204] Bluetooth: hci0: AOSP quality report is supported
> [ 5.619301] Bluetooth: MGMT ver 1.23
> [ 6.741247] Bluetooth: RFCOMM TTY layer initialized
> [ 6.741258] Bluetooth: RFCOMM socket layer initialized
> [ 6.741261] Bluetooth: RFCOMM ver 1.11
>
> [...]
Here is the summary with links:
- Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922
https://git.kernel.org/bluetooth/bluetooth-next/c/72d82f47a019
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922
2025-05-13 6:13 Liwei Sun
@ 2025-05-15 17:10 ` patchwork-bot+bluetooth
0 siblings, 0 replies; 6+ messages in thread
From: patchwork-bot+bluetooth @ 2025-05-15 17:10 UTC (permalink / raw)
To: Liwei Sun; +Cc: marcel, luiz.dentz, linux-bluetooth, linux-kernel
Hello:
This patch was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:
On Tue, 13 May 2025 14:13:54 +0800 you wrote:
> A new variant of MT7922 wireless device has been identified.
> The device introduces itself as MEDIATEK MT7922,
> so treat it as MediaTek device.
> With this patch, btusb driver works as expected:
> [ 3.151162] Bluetooth: Core ver 2.22
> [ 3.151185] Bluetooth: HCI device and connection manager initialized
> [ 3.151189] Bluetooth: HCI socket layer initialized
> [ 3.151191] Bluetooth: L2CAP socket layer initialized
> [ 3.151194] Bluetooth: SCO socket layer initialized
> [ 3.295718] Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20241106163512
> [ 4.676634] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 4.676637] Bluetooth: BNEP filters: protocol multicast
> [ 4.676640] Bluetooth: BNEP socket layer initialized
> [ 5.560453] Bluetooth: hci0: Device setup in 2320660 usecs
> [ 5.560457] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
> [ 5.619197] Bluetooth: hci0: AOSP extensions version v1.00
> [ 5.619204] Bluetooth: hci0: AOSP quality report is supported
> [ 5.619301] Bluetooth: MGMT ver 1.23
> [ 6.741247] Bluetooth: RFCOMM TTY layer initialized
> [ 6.741258] Bluetooth: RFCOMM socket layer initialized
> [ 6.741261] Bluetooth: RFCOMM ver 1.11
>
> [...]
Here is the summary with links:
- Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922
https://git.kernel.org/bluetooth/bluetooth-next/c/72d82f47a019
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2025-05-15 17:09 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-04-30 23:50 [PATCH] Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922 青叶 西城
2025-05-15 17:10 ` patchwork-bot+bluetooth
-- strict thread matches above, loose matches on Subject: below --
2025-05-12 2:31 Liwei Sun
2025-05-12 21:37 ` Luiz Augusto von Dentz
2025-05-13 6:13 Liwei Sun
2025-05-15 17:10 ` patchwork-bot+bluetooth
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).