[PATCH RESEND net 0/3] Fix QCA808X WoL Issue and Enable WoL Support for QCA807X

[PATCH RESEND net 0/3] Fix QCA808X WoL Issue and Enable WoL Support for QCA807X

[Luo Jie]

Restore WoL (Wake-on-LAN) enablement via MMD3 register 0x8012 BIT5 for
the QCA808X PHY. This change resolves the issue where WoL functionality
was not working due to its unintended removal in a previous commit.

Refactor at8031_set_wol() into a shared library to enable reuse of the
Wake-on-LAN (WoL) functionality by the AT8031, QCA807X and QCA808X PHY
drivers.

Additionally, enable the WoL function for the QCA807X PHY by utilizing
the at8031_set_wol() function from the shared library.

Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
---
Luo Jie (3):
      net: phy: qcom: move the WoL function to shared library
      net: phy: qcom: qca808x: Fix WoL issue by utilizing at8031_set_wol()
      net: phy: qcom: qca807x: Enable WoL support using shared library

 drivers/net/phy/qcom/at803x.c       | 27 ---------------------------
 drivers/net/phy/qcom/qca807x.c      |  4 ++++
 drivers/net/phy/qcom/qca808x.c      |  2 +-
 drivers/net/phy/qcom/qcom-phy-lib.c | 25 +++++++++++++++++++++++++
 drivers/net/phy/qcom/qcom.h         |  5 +++++
 5 files changed, 35 insertions(+), 28 deletions(-)
---
base-commit: 223e2288f4b8c262a864e2c03964ffac91744cd5
change-id: 20250704-qcom_phy_wol_support-e4f154cc2f2a

Best regards,
-- 
Luo Jie <quic_luoj@quicinc.com>

[PATCH RESEND net 1/3] net: phy: qcom: move the WoL function to shared library

[Luo Jie]

Move the WoL (Wake-on-LAN) functionality to a shared library to enable
its reuse by the QCA808X PHY driver, incorporating support for WoL
functionality similar to the implementation in at8031_set_wol().

Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
---
 drivers/net/phy/qcom/at803x.c       | 27 ---------------------------
 drivers/net/phy/qcom/qcom-phy-lib.c | 25 +++++++++++++++++++++++++
 drivers/net/phy/qcom/qcom.h         |  5 +++++
 3 files changed, 30 insertions(+), 27 deletions(-)

diff --git a/drivers/net/phy/qcom/at803x.c b/drivers/net/phy/qcom/at803x.c
index 26350b962890..8f26e395e39f 100644
--- a/drivers/net/phy/qcom/at803x.c
+++ b/drivers/net/phy/qcom/at803x.c
@@ -26,9 +26,6 @@
 
 #define AT803X_LED_CONTROL			0x18
 
-#define AT803X_PHY_MMD3_WOL_CTRL		0x8012
-#define AT803X_WOL_EN				BIT(5)
-
 #define AT803X_REG_CHIP_CONFIG			0x1f
 #define AT803X_BT_BX_REG_SEL			0x8000
 
@@ -866,30 +863,6 @@ static int at8031_config_init(struct phy_device *phydev)
 	return at803x_config_init(phydev);
 }
 
-static int at8031_set_wol(struct phy_device *phydev,
-			  struct ethtool_wolinfo *wol)
-{
-	int ret;
-
-	/* First setup MAC address and enable WOL interrupt */
-	ret = at803x_set_wol(phydev, wol);
-	if (ret)
-		return ret;
-
-	if (wol->wolopts & WAKE_MAGIC)
-		/* Enable WOL function for 1588 */
-		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
-				     AT803X_PHY_MMD3_WOL_CTRL,
-				     0, AT803X_WOL_EN);
-	else
-		/* Disable WoL function for 1588 */
-		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
-				     AT803X_PHY_MMD3_WOL_CTRL,
-				     AT803X_WOL_EN, 0);
-
-	return ret;
-}
-
 static int at8031_config_intr(struct phy_device *phydev)
 {
 	struct at803x_priv *priv = phydev->priv;
diff --git a/drivers/net/phy/qcom/qcom-phy-lib.c b/drivers/net/phy/qcom/qcom-phy-lib.c
index d28815ef56bb..af7d0d8e81be 100644
--- a/drivers/net/phy/qcom/qcom-phy-lib.c
+++ b/drivers/net/phy/qcom/qcom-phy-lib.c
@@ -115,6 +115,31 @@ int at803x_set_wol(struct phy_device *phydev,
 }
 EXPORT_SYMBOL_GPL(at803x_set_wol);
 
+int at8031_set_wol(struct phy_device *phydev,
+		   struct ethtool_wolinfo *wol)
+{
+	int ret;
+
+	/* First setup MAC address and enable WOL interrupt */
+	ret = at803x_set_wol(phydev, wol);
+	if (ret)
+		return ret;
+
+	if (wol->wolopts & WAKE_MAGIC)
+		/* Enable WOL function for 1588 */
+		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
+				     AT803X_PHY_MMD3_WOL_CTRL,
+				     0, AT803X_WOL_EN);
+	else
+		/* Disable WoL function for 1588 */
+		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
+				     AT803X_PHY_MMD3_WOL_CTRL,
+				     AT803X_WOL_EN, 0);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(at8031_set_wol);
+
 void at803x_get_wol(struct phy_device *phydev,
 		    struct ethtool_wolinfo *wol)
 {
diff --git a/drivers/net/phy/qcom/qcom.h b/drivers/net/phy/qcom/qcom.h
index 4bb541728846..7f7151c8baca 100644
--- a/drivers/net/phy/qcom/qcom.h
+++ b/drivers/net/phy/qcom/qcom.h
@@ -172,6 +172,9 @@
 #define AT803X_LOC_MAC_ADDR_16_31_OFFSET	0x804B
 #define AT803X_LOC_MAC_ADDR_32_47_OFFSET	0x804A
 
+#define AT803X_PHY_MMD3_WOL_CTRL		0x8012
+#define AT803X_WOL_EN				BIT(5)
+
 #define AT803X_DEBUG_ADDR			0x1D
 #define AT803X_DEBUG_DATA			0x1E
 
@@ -215,6 +218,8 @@ int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg,
 int at803x_debug_reg_write(struct phy_device *phydev, u16 reg, u16 data);
 int at803x_set_wol(struct phy_device *phydev,
 		   struct ethtool_wolinfo *wol);
+int at8031_set_wol(struct phy_device *phydev,
+		   struct ethtool_wolinfo *wol);
 void at803x_get_wol(struct phy_device *phydev,
 		    struct ethtool_wolinfo *wol);
 int at803x_ack_interrupt(struct phy_device *phydev);

-- 
2.34.1

[PATCH RESEND net 2/3] net: phy: qcom: qca808x: Fix WoL issue by utilizing at8031_set_wol()

[Luo Jie]

The previous commit unintentionally removed the code responsible for
enabling WoL via MMD3 register 0x8012 BIT5. As a result, Wake-on-LAN
(WoL) support for the QCA808X PHY is no longer functional.

The WoL (Wake-on-LAN) feature for the QCA808X PHY is enabled via MMD3
register 0x8012, BIT5. This implementation is aligned with the approach
used in at8031_set_wol().

Fixes: e58f30246c35 ("net: phy: at803x: fix the wol setting functions")
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
---
 drivers/net/phy/qcom/qca808x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/qcom/qca808x.c b/drivers/net/phy/qcom/qca808x.c
index 71498c518f0f..6de16c0eaa08 100644
--- a/drivers/net/phy/qcom/qca808x.c
+++ b/drivers/net/phy/qcom/qca808x.c
@@ -633,7 +633,7 @@ static struct phy_driver qca808x_driver[] = {
 	.handle_interrupt	= at803x_handle_interrupt,
 	.get_tunable		= at803x_get_tunable,
 	.set_tunable		= at803x_set_tunable,
-	.set_wol		= at803x_set_wol,
+	.set_wol		= at8031_set_wol,
 	.get_wol		= at803x_get_wol,
 	.get_features		= qca808x_get_features,
 	.config_aneg		= qca808x_config_aneg,

-- 
2.34.1

[PATCH RESEND net 3/3] net: phy: qcom: qca807x: Enable WoL support using shared library

[Luo Jie]

The Wake-on-LAN (WoL) functionality for the QCA807x series is identical
to that of the AT8031. WoL support for QCA807x is enabled by utilizing
the at8031_set_wol() function provided in the shared library.

Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
---
 drivers/net/phy/qcom/qca807x.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/phy/qcom/qca807x.c b/drivers/net/phy/qcom/qca807x.c
index 1af6b5ead74b..f946aa8e92ee 100644
--- a/drivers/net/phy/qcom/qca807x.c
+++ b/drivers/net/phy/qcom/qca807x.c
@@ -799,6 +799,8 @@ static struct phy_driver qca807x_drivers[] = {
 		.suspend	= genphy_suspend,
 		.cable_test_start	= qca807x_cable_test_start,
 		.cable_test_get_status	= qca808x_cable_test_get_status,
+		.set_wol		= at8031_set_wol,
+		.get_wol		= at803x_get_wol,
 	},
 	{
 		PHY_ID_MATCH_EXACT(PHY_ID_QCA8075),
@@ -822,6 +824,8 @@ static struct phy_driver qca807x_drivers[] = {
 		.led_hw_is_supported = qca807x_led_hw_is_supported,
 		.led_hw_control_set = qca807x_led_hw_control_set,
 		.led_hw_control_get = qca807x_led_hw_control_get,
+		.set_wol		= at8031_set_wol,
+		.get_wol		= at803x_get_wol,
 	},
 };
 module_phy_driver(qca807x_drivers);

-- 
2.34.1

Re: [PATCH RESEND net 2/3] net: phy: qcom: qca808x: Fix WoL issue by utilizing at8031_set_wol()

[Maxime Chevallier]

On Fri, 4 Jul 2025 13:31:14 +0800
Luo Jie <quic_luoj@quicinc.com> wrote:

> The previous commit unintentionally removed the code responsible for
> enabling WoL via MMD3 register 0x8012 BIT5. As a result, Wake-on-LAN
> (WoL) support for the QCA808X PHY is no longer functional.
> 
> The WoL (Wake-on-LAN) feature for the QCA808X PHY is enabled via MMD3
> register 0x8012, BIT5. This implementation is aligned with the approach
> used in at8031_set_wol().
> 
> Fixes: e58f30246c35 ("net: phy: at803x: fix the wol setting functions")
> Signed-off-by: Luo Jie <quic_luoj@quicinc.com>

Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>

Maxime

Re: [PATCH RESEND net 3/3] net: phy: qcom: qca807x: Enable WoL support using shared library

[Maxime Chevallier]

On Fri, 4 Jul 2025 13:31:15 +0800
Luo Jie <quic_luoj@quicinc.com> wrote:

> The Wake-on-LAN (WoL) functionality for the QCA807x series is identical
> to that of the AT8031. WoL support for QCA807x is enabled by utilizing
> the at8031_set_wol() function provided in the shared library.
> 
> Signed-off-by: Luo Jie <quic_luoj@quicinc.com>

Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>

Maxime

Re: [PATCH RESEND net 3/3] net: phy: qcom: qca807x: Enable WoL support using shared library

[Jakub Kicinski]

On Fri, 4 Jul 2025 13:31:15 +0800 Luo Jie wrote:
> The Wake-on-LAN (WoL) functionality for the QCA807x series is identical
> to that of the AT8031. WoL support for QCA807x is enabled by utilizing
> the at8031_set_wol() function provided in the shared library.

This needs to go to net-next in around a week (fixes go to net and
propagate to net-next only once a week, around Thursday/Friday).
I will apply the first 2 patches, please repost this later.

Re: [PATCH RESEND net 0/3] Fix QCA808X WoL Issue and Enable WoL Support for QCA807X

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net.git (main)
by Jakub Kicinski <kuba@kernel.org>:

On Fri, 4 Jul 2025 13:31:12 +0800 you wrote:
> Restore WoL (Wake-on-LAN) enablement via MMD3 register 0x8012 BIT5 for
> the QCA808X PHY. This change resolves the issue where WoL functionality
> was not working due to its unintended removal in a previous commit.
> 
> Refactor at8031_set_wol() into a shared library to enable reuse of the
> Wake-on-LAN (WoL) functionality by the AT8031, QCA807X and QCA808X PHY
> drivers.
> 
> [...]

Here is the summary with links:
  - [RESEND,net,1/3] net: phy: qcom: move the WoL function to shared library
    https://git.kernel.org/netdev/net/c/e31cf3cce210
  - [RESEND,net,2/3] net: phy: qcom: qca808x: Fix WoL issue by utilizing at8031_set_wol()
    https://git.kernel.org/netdev/net/c/4ab9ada765b7
  - [RESEND,net,3/3] net: phy: qcom: qca807x: Enable WoL support using shared library
    (no matching commit)

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Re: [PATCH RESEND net 3/3] net: phy: qcom: qca807x: Enable WoL support using shared library

[Luo Jie]

On 7/8/2025 7:43 AM, Jakub Kicinski wrote:
> On Fri, 4 Jul 2025 13:31:15 +0800 Luo Jie wrote:
>> The Wake-on-LAN (WoL) functionality for the QCA807x series is identical
>> to that of the AT8031. WoL support for QCA807x is enabled by utilizing
>> the at8031_set_wol() function provided in the shared library.
> 
> This needs to go to net-next in around a week (fixes go to net and
> propagate to net-next only once a week, around Thursday/Friday).
> I will apply the first 2 patches, please repost this later.

Understand. Thank you for applying the first two patches. I will repost
the remaining patch to net-next once the first two are available there,
as advised.