Re: [PATCH v5 01/17] dt-bindings: serial: renesas,rsci: Document RZ/G3E support

["Rob Herring (Arm)" <robh@kernel.org>]

On Sat, 29 Nov 2025 16:42:57 +0000, Biju wrote:
> From: Biju Das <biju.das.jz@bp.renesas.com>
> 
> Add documentation for the serial communication interface (RSCI) found on
> the Renesas RZ/G3E (R9A09G047) SoC. The RSCI IP on this SoC is identical
> to that on the RZ/T2H (R9A09G077) SoC, but it has a 32-stage FIFO compared
> to 16 on RZ/T2H. It supports both FIFO and non-FIFO mode operation. RZ/G3E
> has 6 clocks(5 module clocks + 1 external clock) compared to 3 clocks
> (2 module clocks + 1 external clock) on RZ/T2H, and it has multiple resets.
> It has 6 interrupts compared to 4 on RZ/T2H.
> 
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---
> v4->v5:
>  * Updated commit description related to IRQ difference
>  * Added aed and bfd irqs for RZ/G3E.
>  * Moved reset: false to RZ/T2H SoC and dropped the else part for RZ/G3E.
>  * Updated conditional schema with interrupts and interrupts-names.
>  * Dropped the tag as there are new changes.
> v3->v4:
>  * Dropped separate compatible for non-FIFO mode and instead using single
>    compatible "renesas,r9a09g047-rsci" as non-FIFO mode can be achieved
>    by software configuration.
>  * Renamed clock-names bus->pclk
>  * Rearranged clock-names tclk{4, 16, 64}
>  * Retained the tag as the changes are trivial.
> v2->v3:
>  * Dropped 1st and 3rd items from clk-names and added minItems for the
>    range.
>  * Added minItems for clk and clk-names for RZ/T2H as the range is 2-3
>  * Added maxItems for clk and clk-names for RZ/G3E as the range is 5-6
>  * Retained the tag as it is trivial change.
> v1->v2:
>  * Updated commit message
>  * Added resets:false for non RZ/G3E SoCs.
> ---
>  .../bindings/serial/renesas,rsci.yaml         | 99 ++++++++++++++++---
>  1 file changed, 88 insertions(+), 11 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20251129164325.209213-2-biju.das.jz@bp.renesas.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.