public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: "Jernej Škrabec" <jernej.skrabec@gmail.com>
To: Chen-Yu Tsai <wens@csie.org>, Maxime Ripard <mripard@kernel.org>,
	Samuel Holland <samuel@sholland.org>
Cc: Samuel Holland <samuel@sholland.org>,
	Daniel Vetter <daniel@ffwll.ch>, David Airlie <airlied@linux.ie>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@lists.linux.dev
Subject: Re: [PATCH v3 10/14] drm/sun4i: csc: Add support for the new MMIO layout
Date: Sun, 24 Apr 2022 22:02:09 +0200	[thread overview]
Message-ID: <1814351.tdWV9SEqCh@kista> (raw)
In-Reply-To: <20220424162633.12369-11-samuel@sholland.org>

Dne nedelja, 24. april 2022 ob 18:26:28 CEST je Samuel Holland napisal(a):
> D1 changes the MMIO offsets for the CSC blocks in the first mixer. The
> mixers' ccsc property is used as an index into the ccsc_base array. Use
> an enumeration to describe this index, and add the new set of offsets.
> 
> Signed-off-by: Samuel Holland <samuel@sholland.org>

Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej Skrabec

> ---
> 
> (no changes since v2)
> 
> Changes in v2:
>  - Use an enumeration for the ccsc value.
> 
>  drivers/gpu/drm/sun4i/sun8i_csc.c   |  7 ++++---
>  drivers/gpu/drm/sun4i/sun8i_csc.h   |  1 +
>  drivers/gpu/drm/sun4i/sun8i_mixer.c | 18 +++++++++---------
>  drivers/gpu/drm/sun4i/sun8i_mixer.h | 14 ++++++++++----
>  4 files changed, 24 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/gpu/drm/sun4i/sun8i_csc.c b/drivers/gpu/drm/sun4i/
sun8i_csc.c
> index 9bd62de0c288..58480d8e4f70 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_csc.c
> +++ b/drivers/gpu/drm/sun4i/sun8i_csc.c
> @@ -8,9 +8,10 @@
>  #include "sun8i_csc.h"
>  #include "sun8i_mixer.h"
>  
> -static const u32 ccsc_base[2][2] = {
> -	{CCSC00_OFFSET, CCSC01_OFFSET},
> -	{CCSC10_OFFSET, CCSC11_OFFSET},
> +static const u32 ccsc_base[][2] = {
> +	[CCSC_MIXER0_LAYOUT]	= {CCSC00_OFFSET, CCSC01_OFFSET},
> +	[CCSC_MIXER1_LAYOUT]	= {CCSC10_OFFSET, CCSC11_OFFSET},
> +	[CCSC_D1_MIXER0_LAYOUT]	= {CCSC00_OFFSET, 
CCSC01_D1_OFFSET},
>  };
>  
>  /*
> diff --git a/drivers/gpu/drm/sun4i/sun8i_csc.h b/drivers/gpu/drm/sun4i/
sun8i_csc.h
> index 022cafa6c06c..828b86fd0cab 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_csc.h
> +++ b/drivers/gpu/drm/sun4i/sun8i_csc.h
> @@ -13,6 +13,7 @@ struct sun8i_mixer;
>  /* VI channel CSC units offsets */
>  #define CCSC00_OFFSET 0xAA050
>  #define CCSC01_OFFSET 0xFA050
> +#define CCSC01_D1_OFFSET 0xFA000
>  #define CCSC10_OFFSET 0xA0000
>  #define CCSC11_OFFSET 0xF0000
>  
> diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c b/drivers/gpu/drm/sun4i/
sun8i_mixer.c
> index 6b1711a9a71f..4ce593c99807 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_mixer.c
> +++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c
> @@ -564,7 +564,7 @@ static int sun8i_mixer_remove(struct platform_device 
*pdev)
>  }
>  
>  static const struct sun8i_mixer_cfg sun8i_a83t_mixer0_cfg = {
> -	.ccsc		= 0,
> +	.ccsc		= CCSC_MIXER0_LAYOUT,
>  	.scaler_mask	= 0xf,
>  	.scanline_yuv	= 2048,
>  	.ui_num		= 3,
> @@ -572,7 +572,7 @@ static const struct sun8i_mixer_cfg 
sun8i_a83t_mixer0_cfg = {
>  };
>  
>  static const struct sun8i_mixer_cfg sun8i_a83t_mixer1_cfg = {
> -	.ccsc		= 1,
> +	.ccsc		= CCSC_MIXER1_LAYOUT,
>  	.scaler_mask	= 0x3,
>  	.scanline_yuv	= 2048,
>  	.ui_num		= 1,
> @@ -580,7 +580,7 @@ static const struct sun8i_mixer_cfg 
sun8i_a83t_mixer1_cfg = {
>  };
>  
>  static const struct sun8i_mixer_cfg sun8i_h3_mixer0_cfg = {
> -	.ccsc		= 0,
> +	.ccsc		= CCSC_MIXER0_LAYOUT,
>  	.mod_rate	= 432000000,
>  	.scaler_mask	= 0xf,
>  	.scanline_yuv	= 2048,
> @@ -589,7 +589,7 @@ static const struct sun8i_mixer_cfg sun8i_h3_mixer0_cfg 
= {
>  };
>  
>  static const struct sun8i_mixer_cfg sun8i_r40_mixer0_cfg = {
> -	.ccsc		= 0,
> +	.ccsc		= CCSC_MIXER0_LAYOUT,
>  	.mod_rate	= 297000000,
>  	.scaler_mask	= 0xf,
>  	.scanline_yuv	= 2048,
> @@ -598,7 +598,7 @@ static const struct sun8i_mixer_cfg sun8i_r40_mixer0_cfg 
= {
>  };
>  
>  static const struct sun8i_mixer_cfg sun8i_r40_mixer1_cfg = {
> -	.ccsc		= 1,
> +	.ccsc		= CCSC_MIXER1_LAYOUT,
>  	.mod_rate	= 297000000,
>  	.scaler_mask	= 0x3,
>  	.scanline_yuv	= 2048,
> @@ -611,12 +611,12 @@ static const struct sun8i_mixer_cfg 
sun8i_v3s_mixer_cfg = {
>  	.ui_num = 1,
>  	.scaler_mask = 0x3,
>  	.scanline_yuv = 2048,
> -	.ccsc = 0,
> +	.ccsc = CCSC_MIXER0_LAYOUT,
>  	.mod_rate = 150000000,
>  };
>  
>  static const struct sun8i_mixer_cfg sun50i_a64_mixer0_cfg = {
> -	.ccsc		= 0,
> +	.ccsc		= CCSC_MIXER0_LAYOUT,
>  	.mod_rate	= 297000000,
>  	.scaler_mask	= 0xf,
>  	.scanline_yuv	= 4096,
> @@ -625,7 +625,7 @@ static const struct sun8i_mixer_cfg 
sun50i_a64_mixer0_cfg = {
>  };
>  
>  static const struct sun8i_mixer_cfg sun50i_a64_mixer1_cfg = {
> -	.ccsc		= 1,
> +	.ccsc		= CCSC_MIXER1_LAYOUT,
>  	.mod_rate	= 297000000,
>  	.scaler_mask	= 0x3,
>  	.scanline_yuv	= 2048,
> @@ -634,7 +634,7 @@ static const struct sun8i_mixer_cfg 
sun50i_a64_mixer1_cfg = {
>  };
>  
>  static const struct sun8i_mixer_cfg sun50i_h6_mixer0_cfg = {
> -	.ccsc		= 0,
> +	.ccsc		= CCSC_MIXER0_LAYOUT,
>  	.is_de3		= true,
>  	.mod_rate	= 600000000,
>  	.scaler_mask	= 0xf,
> diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.h b/drivers/gpu/drm/sun4i/
sun8i_mixer.h
> index 5b3fbee18671..85c94884fb9a 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_mixer.h
> +++ b/drivers/gpu/drm/sun4i/sun8i_mixer.h
> @@ -141,6 +141,15 @@
>  #define SUN50I_MIXER_CDC0_EN			0xd0000
>  #define SUN50I_MIXER_CDC1_EN			0xd8000
>  
> +enum {
> +	/* First mixer or second mixer with VEP support. */
> +	CCSC_MIXER0_LAYOUT,
> +	/* Second mixer without VEP support. */
> +	CCSC_MIXER1_LAYOUT,
> +	/* First mixer with the MMIO layout found in the D1 SoC. */
> +	CCSC_D1_MIXER0_LAYOUT,
> +};
> +
>  /**
>   * struct sun8i_mixer_cfg - mixer HW configuration
>   * @vi_num: number of VI channels
> @@ -149,10 +158,7 @@
>   *	First, scaler supports for VI channels is defined and after that, 
scaler
>   *	support for UI channels. For example, if mixer has 2 VI channels 
without
>   *	scaler and 2 UI channels with scaler, bitmask would be 0xC.
> - * @ccsc: select set of CCSC base addresses
> - *	Set value to 0 if this is first mixer or second mixer with VEP 
support.
> - *	Set value to 1 if this is second mixer without VEP support. Other 
values
> - *	are invalid.
> + * @ccsc: select set of CCSC base addresses from the enumeration above.
>   * @mod_rate: module clock rate that needs to be set in order to have
>   *	a functional block.
>   * @is_de3: true, if this is next gen display engine 3.0, false otherwise.
> -- 
> 2.35.1
> 
> 



  reply	other threads:[~2022-04-24 20:02 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-24 16:26 [PATCH v3 00/14] drm/sun4i: Allwinner D1 Display Engine 2.0 Support Samuel Holland
2022-04-24 16:26 ` [PATCH v3 01/14] dt-bindings: display: Separate clock item lists by compatible Samuel Holland
2022-04-26 12:41   ` (subset) " Maxime Ripard
2022-04-24 16:26 ` [PATCH v3 02/14] dt-bindings: display: Add D1 display engine compatibles Samuel Holland
2022-04-26 12:41   ` (subset) " Maxime Ripard
2022-04-24 16:26 ` [PATCH v3 03/14] drm/sun4i: Remove obsolete references to PHYS_OFFSET Samuel Holland
2022-04-26 12:41   ` (subset) " Maxime Ripard
2022-04-24 16:26 ` [PATCH v3 04/14] drm/sun4i: hdmi: Use more portable I/O helpers Samuel Holland
2022-04-24 19:59   ` Jernej Škrabec
2022-04-26 12:41   ` (subset) " Maxime Ripard
2022-04-24 16:26 ` [PATCH v3 05/14] drm/sun4i: Allow building the driver on RISC-V Samuel Holland
2022-04-26 12:41   ` (subset) " Maxime Ripard
2022-04-24 16:26 ` [PATCH v3 06/14] sun4i/drm: engine: Add mode_set callback Samuel Holland
2022-04-26 12:41   ` (subset) " Maxime Ripard
2022-04-24 16:26 ` [PATCH v3 07/14] sun4i/drm: backend: use mode_set engine callback Samuel Holland
2022-04-26 12:41   ` (subset) " Maxime Ripard
2022-04-24 16:26 ` [PATCH v3 08/14] sun4i/drm: sun8i: " Samuel Holland
2022-04-26 12:41   ` (subset) " Maxime Ripard
2022-04-24 16:26 ` [PATCH v3 09/14] drm/sun4i: Allow VI layers to be primary planes Samuel Holland
2022-04-24 20:01   ` Jernej Škrabec
2022-04-26 12:41   ` (subset) " Maxime Ripard
2022-04-24 16:26 ` [PATCH v3 10/14] drm/sun4i: csc: Add support for the new MMIO layout Samuel Holland
2022-04-24 20:02   ` Jernej Škrabec [this message]
2022-04-26 12:41   ` (subset) " Maxime Ripard
2022-04-24 16:26 ` [PATCH v3 11/14] drm/sun4i: Add support for D1 mixers Samuel Holland
2022-04-26 12:41   ` (subset) " Maxime Ripard
2022-04-24 16:26 ` [PATCH v3 12/14] drm/sun4i: Add support for D1 TCON TOP Samuel Holland
2022-04-24 20:06   ` Jernej Škrabec
2022-04-26 12:41   ` (subset) " Maxime Ripard
2022-04-24 16:26 ` [PATCH v3 13/14] drm/sun4i: Add support for D1 TCONs Samuel Holland
2022-04-24 20:08   ` Jernej Škrabec
2022-04-26 12:41   ` (subset) " Maxime Ripard
2022-04-24 16:26 ` [PATCH v3 14/14] drm/sun4i: Add compatible for D1 display engine Samuel Holland
2022-04-26 12:41   ` (subset) " Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1814351.tdWV9SEqCh@kista \
    --to=jernej.skrabec@gmail.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=mripard@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=samuel@sholland.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox