Re: [PATCH v6 2/3] dt-bindings: iommu: Add documentation for rockchip iommu

["Heiko Stübner" <heiko@sntech.de>]

Am Montag, 27. Oktober 2014, 20:37:27 schrieb Daniel Kurtz:
> Add binding documentation for Rockchip IOMMU.
> 
> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
> Signed-off-by: Simon Xue <xxm@rock-chips.com>

Reviewed-by: Heiko Stuebner <heiko@sntech.de>

> ---
>  .../devicetree/bindings/iommu/rockchip,iommu.txt   | 26
> ++++++++++++++++++++++ 1 file changed, 26 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
> 
> diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
> b/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt new file mode
> 100644
> index 0000000..9a55ac3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
> @@ -0,0 +1,26 @@
> +Rockchip IOMMU
> +==============
> +
> +A Rockchip DRM iommu translates io virtual addresses to physical addresses
> for +its master device.  Each slave device is bound to a single master
> device, and +shares its clocks, power domain and irq.
> +
> +Required properties:
> +- compatible      : Should be "rockchip,iommu"
> +- reg             : Address space for the configuration registers
> +- interrupts      : Interrupt specifier for the IOMMU instance
> +- interrupt-names : Interrupt name for the IOMMU instance
> +- #iommu-cells    : Should be <0>.  This indicates the iommu is a
> +                    "single-master" device, and needs no additional
> information +                    to associate with its master device.  See:
> +                    Documentation/devicetree/bindings/iommu/iommu.txt
> +
> +Example:
> +
> +	vopl_mmu: iommu@ff940300 {
> +		compatible = "rockchip,iommu";
> +		reg = <0xff940300 0x100>;
> +		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "vopl_mmu";
> +		#iommu-cells = <0>;
> +	};