From: Luca Weiss <luca@z3ntu.xyz>
To: ~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org, Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Eduardo Valentin <edubezval@gmail.com>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
linux-arm-msm@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Craig Tatlor <ctatlor97@gmail.com>
Subject: Re: [PATCH] ARM: dts: qcom: msm8974: correct qfprom node reg
Date: Mon, 30 Jan 2023 19:36:19 +0100 [thread overview]
Message-ID: <1886214.taCxCBeP46@g550jk> (raw)
In-Reply-To: <3112b531-45df-672c-c0a7-aefbdcceb727@linaro.org>
On Montag, 30. Jänner 2023 19:30:04 CET Konrad Dybcio wrote:
> On 30.01.2023 19:20, luca@z3ntu.xyz wrote:
> > From: Craig Tatlor <ctatlor97@gmail.com>
> >
> > The qfprom actually starts at 0xfc4b8000 instead of 0xfc4bc000 as
> > defined previously. Adjust the tsens offsets accordingly.
> >
> > [luca@z3ntu.xyz: extract to standalone patch]
> >
> > Fixes: c59ffb519357 ("arm: dts: msm8974: Add thermal zones, tsens and
> > qfprom nodes") Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
> > Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> > ---
>
> Isn't this a raw vs ecc-corrected values problem?
Not quite sure what you mean.
The original intention behind this patch is to allow to use the pvs fuse at
(now) 0xb0 which was inaccessible with the former definition.
pvs: pvs@b0 {
reg = <0xb0 0x8>;
};
Regards
Luca
>
> Konrad
>
> > arch/arm/boot/dts/qcom-msm8974.dtsi | 12 ++++++------
> > 1 file changed, 6 insertions(+), 6 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi
> > b/arch/arm/boot/dts/qcom-msm8974.dtsi index 8d216a3c0851..922d235c6065
> > 100644
> > --- a/arch/arm/boot/dts/qcom-msm8974.dtsi
> > +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
> > @@ -1132,16 +1132,16 @@ restart@fc4ab000 {
> >
> > reg = <0xfc4ab000 0x4>;
> >
> > };
> >
> > - qfprom: qfprom@fc4bc000 {
> > + qfprom: qfprom@fc4b8000 {
> >
> > compatible = "qcom,msm8974-qfprom",
"qcom,qfprom";
> >
> > - reg = <0xfc4bc000 0x1000>;
> > + reg = <0xfc4b8000 0x7000>;
> >
> > #address-cells = <1>;
> > #size-cells = <1>;
> >
> > - tsens_calib: calib@d0 {
> > - reg = <0xd0 0x18>;
> > + tsens_calib: calib@40d0 {
> > + reg = <0x40d0 0x18>;
> >
> > };
> >
> > - tsens_backup: backup@440 {
> > - reg = <0x440 0x10>;
> > + tsens_backup: backup@4440 {
> > + reg = <0x4440 0x10>;
> >
> > };
> >
> > };
> >
> > ---
> > base-commit: 6d796c50f84ca79f1722bb131799e5a5710c4700
> > change-id: 20230130-msm8974-qfprom-619c0e8f26eb
> >
> > Best regards,
next prev parent reply other threads:[~2023-01-30 18:37 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-30 18:20 [PATCH] ARM: dts: qcom: msm8974: correct qfprom node reg luca
2023-01-30 18:30 ` Konrad Dybcio
2023-01-30 18:36 ` Luca Weiss [this message]
2023-01-30 18:42 ` Konrad Dybcio
2023-01-30 20:37 ` Luca Weiss
2023-04-19 16:00 ` Luca Weiss
2023-04-19 16:12 ` Konrad Dybcio
2023-04-19 16:18 ` Luca Weiss
2023-04-19 16:20 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1886214.taCxCBeP46@g550jk \
--to=luca@z3ntu.xyz \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=ctatlor97@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox