public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jiang Liu <liuj97@gmail.com>, Jiang Liu <jiang.liu@huawei.com>,
	Yijing Wang <wangyijing@huawei.com>,
	"linux-acpi@vger.kernel.org" <linux-acpi@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Yinghai Lu <yinghai@kernel.org>, Len Brown <lenb@kernel.org>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>
Subject: Re: [PATCH v3 10/10] ACPI: simplify acpiphp driver with new helper functions
Date: Fri, 28 Jun 2013 20:42:51 +0200	[thread overview]
Message-ID: <1908581.jLjdVJokRn@vostro.rjw.lan> (raw)
In-Reply-To: <CAErSpo7DTioqp_atjr5NLfGk=afqgbdt=ZZerSzV=EJeR1WwLA@mail.gmail.com>

On Friday, June 28, 2013 11:20:21 AM Bjorn Helgaas wrote:
> On Fri, Jun 28, 2013 at 10:24 AM, Jiang Liu <liuj97@gmail.com> wrote:
> > From: Jiang Liu <jiang.liu@huawei.com>
> >
> > Use new helper functions to simplify acpiphp driver.
> >
> > Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
> 
> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
> 
> I assume this will be merged via linux-pm with the rest of the series.

Yup, into 3.12.

Thanks,
Rafael


> > Cc: Jiang Liu <liuj97@gmail.com>
> > Cc: Bjorn Helgaas <bhelgaas@google.com>
> > Cc: Yinghai Lu <yinghai@kernel.org>
> > Cc: Len Brown <lenb@kernel.org>
> > Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
> > Cc: Yijing Wang <wangyijing@huawei.com>
> > Cc: linux-acpi@vger.kernel.org
> > Cc: linux-pci@vger.kernel.org
> > Cc: linux-kernel@vger.kernel.org
> > ---
> >  drivers/pci/hotplug/acpiphp_glue.c | 30 ++++++++----------------------
> >  1 file changed, 8 insertions(+), 22 deletions(-)
> >
> > diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
> > index 59df857..a0a7133 100644
> > --- a/drivers/pci/hotplug/acpiphp_glue.c
> > +++ b/drivers/pci/hotplug/acpiphp_glue.c
> > @@ -201,7 +201,6 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
> >         struct acpiphp_bridge *bridge = (struct acpiphp_bridge *)context;
> >         struct acpiphp_slot *slot;
> >         struct acpiphp_func *newfunc;
> > -       acpi_handle tmp;
> >         acpi_status status = AE_OK;
> >         unsigned long long adr, sun;
> >         int device, function, retval, found = 0;
> > @@ -232,19 +231,19 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
> >         newfunc->handle = handle;
> >         newfunc->function = function;
> >
> > -       if (ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp)))
> > +       if (acpi_has_method(handle, "_EJ0"))
> >                 newfunc->flags = FUNC_HAS_EJ0;
> >
> > -       if (ACPI_SUCCESS(acpi_get_handle(handle, "_STA", &tmp)))
> > +       if (acpi_has_method(handle, "_STA"))
> >                 newfunc->flags |= FUNC_HAS_STA;
> >
> > -       if (ACPI_SUCCESS(acpi_get_handle(handle, "_PS0", &tmp)))
> > +       if (acpi_has_method(handle, "_PS0"))
> >                 newfunc->flags |= FUNC_HAS_PS0;
> >
> > -       if (ACPI_SUCCESS(acpi_get_handle(handle, "_PS3", &tmp)))
> > +       if (acpi_has_method(handle, "_PS3"))
> >                 newfunc->flags |= FUNC_HAS_PS3;
> >
> > -       if (ACPI_SUCCESS(acpi_get_handle(handle, "_DCK", &tmp)))
> > +       if (acpi_has_method(handle, "_DCK"))
> >                 newfunc->flags |= FUNC_HAS_DCK;
> >
> >         status = acpi_evaluate_integer(handle, "_SUN", NULL, &sun);
> > @@ -843,25 +842,14 @@ static unsigned int get_slot_status(struct acpiphp_slot *slot)
> >   */
> >  int acpiphp_eject_slot(struct acpiphp_slot *slot)
> >  {
> > -       acpi_status status;
> >         struct acpiphp_func *func;
> > -       struct acpi_object_list arg_list;
> > -       union acpi_object arg;
> >
> >         list_for_each_entry(func, &slot->funcs, sibling) {
> >                 /* We don't want to call _EJ0 on non-existing functions. */
> >                 if ((func->flags & FUNC_HAS_EJ0)) {
> > -                       /* _EJ0 method take one argument */
> > -                       arg_list.count = 1;
> > -                       arg_list.pointer = &arg;
> > -                       arg.type = ACPI_TYPE_INTEGER;
> > -                       arg.integer.value = 1;
> > -
> > -                       status = acpi_evaluate_object(func->handle, "_EJ0", &arg_list, NULL);
> > -                       if (ACPI_FAILURE(status)) {
> > -                               warn("%s: _EJ0 failed\n", __func__);
> > +                       if (ACPI_FAILURE(acpi_evaluate_ej0(func->handle)))
> >                                 return -1;
> > -                       } else
> > +                       else
> >                                 break;
> >                 }
> >         }
> > @@ -1171,7 +1159,6 @@ static void handle_hotplug_event_func(acpi_handle handle, u32 type,
> >   */
> >  void acpiphp_enumerate_slots(struct pci_bus *bus, acpi_handle handle)
> >  {
> > -       acpi_handle dummy_handle;
> >         struct acpiphp_bridge *bridge;
> >
> >         if (acpiphp_disabled)
> > @@ -1200,8 +1187,7 @@ void acpiphp_enumerate_slots(struct pci_bus *bus, acpi_handle handle)
> >         get_device(&bus->dev);
> >
> >         if (!pci_is_root_bus(bridge->pci_bus) &&
> > -           ACPI_SUCCESS(acpi_get_handle(bridge->handle,
> > -                                       "_EJ0", &dummy_handle))) {
> > +           acpi_has_method(bridge->handle, "_EJ0")) {
> >                 dbg("found ejectable p2p bridge\n");
> >                 bridge->flags |= BRIDGE_HAS_EJ0;
> >                 bridge->func = acpiphp_bridge_handle_to_function(handle);
> > --
> > 1.8.1.2
> >
-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

  reply	other threads:[~2013-06-28 18:33 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-28 16:24 [PATCH v3 00/10] minor improvements for ACPI dock and acpiphp drivers Jiang Liu
2013-06-28 16:24 ` [PATCH v3 01/10] ACPI, DOCK: avoid initializing acpi_dock_notifier_list multiple times Jiang Liu
2013-06-28 16:24 ` [PATCH v3 02/10] ACPI, DOCK: kill redundant spin lock in dock station object Jiang Liu
2013-06-28 16:24 ` [PATCH v3 03/10] ACPI, DOCK: mark initialization functions with __init Jiang Liu
2013-06-28 16:24 ` [PATCH v3 04/10] ACPI, DOCK: simplify implementation of dock_create_acpi_device() Jiang Liu
2013-06-28 16:24 ` [PATCH v3 05/10] ACPI: introduce helper function acpi_has_method() Jiang Liu
2013-06-28 16:24 ` [PATCH v3 06/10] ACPI: introduce helper function acpi_execute_simple_method() Jiang Liu
2013-06-28 16:24 ` [PATCH v3 07/10] ACPI: introduce two helper functions to simplify code Jiang Liu
2013-06-28 16:24 ` [PATCH v3 08/10] ACPI: change acpi_[bay|dock]_match() in scan.c as global functions Jiang Liu
2013-06-28 16:24 ` [PATCH v3 09/10] ACPI: simplify dock driver with new helper functions Jiang Liu
2013-06-28 16:24 ` [PATCH v3 10/10] ACPI: simplify acpiphp " Jiang Liu
2013-06-28 17:20   ` Bjorn Helgaas
2013-06-28 18:42     ` Rafael J. Wysocki [this message]
2013-06-28 18:42 ` [PATCH v3 00/10] minor improvements for ACPI dock and acpiphp drivers Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1908581.jLjdVJokRn@vostro.rjw.lan \
    --to=rjw@sisk.pl \
    --cc=bhelgaas@google.com \
    --cc=jiang.liu@huawei.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=liuj97@gmail.com \
    --cc=wangyijing@huawei.com \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox