Re: [PATCH] mtd: spi-nor: Add support for is25lp01g

[<Tudor.Ambarus@microchip.com>]

Hi, Clement,

On Friday, April 17, 2020 7:08:39 PM EEST Clement Leger wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> content is safe
> 
> Update the issi_parts table for is25lp01g (128MB) device from ISSI.
> Tested on Kalray K200 board.
> 
> Signed-off-by: Clement Leger <cleger@kalray.eu>
> ---
>  drivers/mtd/spi-nor/issi.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
> index ffcb60e54a80..c3c3438e3d08 100644
> --- a/drivers/mtd/spi-nor/issi.c
> +++ b/drivers/mtd/spi-nor/issi.c
> @@ -49,6 +49,8 @@ static const struct flash_info issi_parts[] = {
>                              SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ
> | SPI_NOR_4B_OPCODES)
>                 .fixups = &is25lp256_fixups },
> +       { "is25lp01g",  INFO(0x9d601b, 0, 64 * 1024, 2048,

There is a "K" flavor of this flash which has 512 Byte Page size with 256 KB
Block size. While the page size can be determined by parsing SFDP, I think we 
will have some problems with sector_size because as of now, the sector_size is 
always set to 64KB. An incorrect sector_size will affect erases and locking.

Cheers,
ta