From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Magnus Damm <magnus.damm@gmail.com>
Cc: linux-kernel@vger.kernel.org, linux-sh@vger.kernel.org,
linus.walleij@linaro.org, wsa@the-dreams.de, horms@verge.net.au
Subject: Re: [PATCH 01/03] pinctrl: sh-pfc: r7s72100 SCIF2 port3 support
Date: Wed, 27 Nov 2013 11:56:54 +0100 [thread overview]
Message-ID: <1956759.4Z7la2uQeC@avalon> (raw)
In-Reply-To: <20131127080621.18384.85008.sendpatchset@w520>
Hi Magnus,
Thank you for the patch.
On Wednesday 27 November 2013 17:06:21 Magnus Damm wrote:
> From: Magnus Damm <damm@opensource.se>
>
> Add support for SCIF2 port3 pin functions SCK, TXD and RXD to the
> r7s72100 PINCTRL code. There are two possible pins that can be used
> for TXD (Port 3 Pin 0 Function 6 and Port 3 Pin 1 Function 4) and
> because of that are the data pins broken out in separate TXD and RXD.
>
> This format is similar to other sh-pfc code, but a following patch
> converts this to less verbose and less readable code.
You hopefully mean more readable :-)
It would help me reviewing this patch if I could get access to the SoC
datasheet.
> Signed-off-by: Magnus Damm <damm@opensource.se>
> ---
>
> drivers/pinctrl/sh-pfc/pfc-r7s72100.c | 41 ++++++++++++++++++++++++++++++
> 1 file changed, 41 insertions(+)
>
> --- 0002/drivers/pinctrl/sh-pfc/pfc-r7s72100.c
> +++ work/drivers/pinctrl/sh-pfc/pfc-r7s72100.c 2013-11-27
15:22:16.000000000
> +0900 @@ -103,10 +103,51 @@ static struct sh_pfc_pin pinmux_pins[] =
> _P_ALL(_P_GPIO),
> };
>
> +/* - SCIF2 ------------------------------------------------------------- */
> +static const unsigned int scif2_txd_p3_0_pins[] = {
> + /* TX */
> + RZ_PORT_PIN(3, 0),
> +};
> +static const unsigned int scif2_txd_p3_0_mux[] = {
> + P_3_0_MARK_FN6,
> +};
> +static const unsigned int scif2_txd_p3_1_pins[] = {
> + /* TX */
> + RZ_PORT_PIN(3, 1),
> +};
> +static const unsigned int scif2_txd_p3_1_mux[] = {
> + P_3_1_MARK_FN4,
> +};
> +static const unsigned int scif2_rxd_p3_2_pins[] = {
> + /* RX */
> + RZ_PORT_PIN(3, 2),
> +};
> +static const unsigned int scif2_rxd_p3_2_mux[] = {
> + P_3_2_MARK_FN4,
> +};
> +static const unsigned int scif2_clk_p3_0_pins[] = {
> + /* SCK */
> + RZ_PORT_PIN(3, 0),
> +};
> +static const unsigned int scif2_clk_p3_0_mux[] = {
> + P_3_0_MARK_FN4,
> +};
> +
> static const struct sh_pfc_pin_group pinmux_groups[] = {
> + SH_PFC_PIN_GROUP(scif2_txd_p3_0),
> + SH_PFC_PIN_GROUP(scif2_txd_p3_1),
> + SH_PFC_PIN_GROUP(scif2_rxd_p3_2),
> + SH_PFC_PIN_GROUP(scif2_clk_p3_0),
> };
>
> +static const char * const scif2_groups[] = {
> + "scif2_txd_p3_0",
> + "scif2_txd_p3_1",
> + "scif2_rxd_p3_2",
> + "scif2_clk_p3_0",
> +};
> static const struct sh_pfc_function pinmux_functions[] = {
> + SH_PFC_FUNCTION(scif2),
> };
>
> #define PFC_REG(idx, name, reg) \
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2013-11-27 16:21 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-27 8:06 [PATCH 00/03] pinctrl: sh-pfc: r7s72100 SCIF2 support Magnus Damm
2013-11-27 8:06 ` [PATCH 01/03] pinctrl: sh-pfc: r7s72100 SCIF2 port3 support Magnus Damm
2013-11-27 10:56 ` Laurent Pinchart [this message]
2013-11-29 10:29 ` Linus Walleij
2013-11-29 13:53 ` Laurent Pinchart
2013-11-27 8:06 ` [PATCH 02/03] pinctrl: sh-pfc: r7s72100 SCIF2 macro conversion Magnus Damm
2013-11-27 11:02 ` Laurent Pinchart
2013-11-27 8:06 ` [PATCH 03/03] pinctrl: sh-pfc: r7s72100 SCIF2 port4, 6 and 8 support Magnus Damm
2013-12-03 9:36 ` Linus Walleij
2013-12-03 12:18 ` Simon Horman
2013-12-04 1:09 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1956759.4Z7la2uQeC@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=horms@verge.net.au \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox