From: Eugene Kuznetsov <ekuznetsov@divxnetworks.com>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-kernel@vger.kernel.org
Subject: Re[6]: Support of AMD 762?
Date: Thu, 2 May 2002 18:09:02 -0700 [thread overview]
Message-ID: <197354375.20020502180902@divxnetworks.com> (raw)
In-Reply-To: <E173R3Y-0005GN-00@the-village.bc.nu>
Hello Alan,
Thursday, May 02, 2002, 5:36:16 PM, you wrote:
>> ENABLING IO-APIC IRQs
>> Setting 2 in the phys_id_present_map
>> ...changing IO-APIC physical APIC ID to 2 ... ok.
AC> You are using APIC mode - the $PIR router isnt even involved. The AMD 762
AC> BIOS and Software writers guide discusses the MP mode behaviour if you want
AC> to look into it further but it looks as if your BIOS is simply horked
Aha! I added noapic to kernel command line and it started to work:
PCI: PCI BIOS revision 2.10 entry at 0xf0df0, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router AMD768 [1022/7443] at 00:07.3
AMD756: dev 1102:0002, router pirq : 1 get irq : 3
PCI: Found IRQ 3 for device 00:09.0
PCI: Sharing IRQ 3 with 02:06.0
AMD756: dev 1033:0035, router pirq : 2 get irq : 7
PCI: Found IRQ 7 for device 02:06.1
IRQ routing conflict for 02:05.0, have irq 9, want irq 7
AMD756: dev 1033:00e0, router pirq : 3 get irq : 9
PCI: Found IRQ 9 for device 02:06.2
<...>
Creative EMU10K1 PCI Audio Driver, version 0.18, 09:18:48 Apr 16 2002
emu10k1_probe
PCI: Enabling device 00:09.0 (0004 -> 0005)
AMD756: dev 1102:0002, router pirq : 1 get irq : 3
PCI: Found IRQ 3 for device 00:09.0
PCI: Sharing IRQ 3 with 02:06.0
emu10k1: EMU10K1 rev 7 model 0x8064 found, IO at 0xb400-0xb41f, IRQ 3
ac97_codec: AC97 Audio codec, id: 0x8384:0x7608 (SigmaTel STAC9708)
emu10k1: SBLive! 5.1 card detected
AC> PCI cards are mapped to IRQ 16->19 in APIC mode with the ISA lines on
AC> 0-15. The only question there is which of INTA/INTB/INTC/INTD is ultimately
AC> wired to the INTA on that slot. That is what the MP table should say but
AC> is not
AC> Do you see this with both MP 1.1 and MP 1.4 ?
Without noapic, the output from previous email was with MP 1.1. With
MP 1.4 kernel hangs somewhere near "calibrating APIC timer". With
noapic it seems to work with both 1.1 and 1.4.
I'll take a look at the doc you mentioned. Thank you.
--
Best regards,
Eugene mailto:ekuznetsov@divxnetworks.com
next prev parent reply other threads:[~2002-05-03 1:09 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-05-02 20:13 Support of AMD 762? Eugene Kuznetsov
2002-05-02 20:49 ` Alan Cox
2002-05-02 20:32 ` Re[2]: " Eugene Kuznetsov
2002-05-02 20:53 ` Alan Cox
2002-05-02 21:27 ` Alan Cox
2002-05-02 21:57 ` Re[4]: " Eugene Kuznetsov
2002-05-03 0:36 ` Alan Cox
2002-05-03 0:44 ` Dave Jones
2002-05-03 1:11 ` Re[6]: " Eugene Kuznetsov
2002-05-03 1:09 ` Eugene Kuznetsov [this message]
2002-05-03 1:31 ` Alan Cox
2002-05-03 1:32 ` Re[8]: " Eugene Kuznetsov
2002-05-03 8:20 ` Emmanuel Michon
[not found] <581358328.20020502182546@divxnetworks.com>
2002-05-03 2:08 ` Re[6]: " Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=197354375.20020502180902@divxnetworks.com \
--to=ekuznetsov@divxnetworks.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox