From: "Dilger, Andreas" <andreas.dilger@intel.com>
To: Arushi Singhal <arushisinghal19971997@gmail.com>
Cc: "Drokin, Oleg" <oleg.drokin@intel.com>,
James Simmons <jsimmons@infradead.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
lustre-devel <lustre-devel@lists.lustre.org>,
"devel@driverdev.osuosl.org" <devel@driverdev.osuosl.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"outreachy-kernel@googlegroups.com"
<outreachy-kernel@googlegroups.com>
Subject: Re: [PATCH v2] staging: lustre: Replace a bit shift by a use of BIT.
Date: Thu, 23 Mar 2017 20:41:47 +0000 [thread overview]
Message-ID: <1BE44C84-0DDB-4D9E-B4CB-C8A979F48EC6@intel.com> (raw)
In-Reply-To: <20170322155333.GA17411@arushi-HP-Pavilion-Notebook>
On Mar 22, 2017, at 09:53, Arushi Singhal <arushisinghal19971997@gmail.com> wrote:
>
> This patch replaces bit shifting on 1 with the BIT(x) macro.
> This was done with coccinelle:
> @@
> constant c;
> @@
>
> -1 << c
> +BIT(c)
>
> Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
> ---
> changes in v2
> - remove the unnecessary parenthesis.
> - removethe wrong changes.
>
> drivers/staging/lustre/lnet/klnds/socklnd/socklnd_cb.c | 8 ++++----
> drivers/staging/lustre/lnet/lnet/lib-ptl.c | 2 +-
> drivers/staging/lustre/lustre/llite/lproc_llite.c | 2 +-
> 3 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/staging/lustre/lnet/klnds/socklnd/socklnd_cb.c b/drivers/staging/lustre/lnet/klnds/socklnd/socklnd_cb.c
> index eaa4399e6a2e..2b93ceaa2844 100644
> --- a/drivers/staging/lustre/lnet/klnds/socklnd/socklnd_cb.c
> +++ b/drivers/staging/lustre/lnet/klnds/socklnd/socklnd_cb.c
> @@ -1906,14 +1906,14 @@ ksocknal_connect(struct ksock_route *route)
> if (retry_later) /* needs reschedule */
> break;
>
> - if (wanted & (1 << SOCKLND_CONN_ANY)) {
> + if (wanted & BIT(SOCKLND_CONN_ANY)) {
> type = SOCKLND_CONN_ANY;
> - } else if (wanted & (1 << SOCKLND_CONN_CONTROL)) {
> + } else if (wanted & BIT(SOCKLND_CONN_CONTROL)) {
> type = SOCKLND_CONN_CONTROL;
> - } else if (wanted & (1 << SOCKLND_CONN_BULK_IN)) {
> + } else if (wanted & BIT(SOCKLND_CONN_BULK_IN)) {
> type = SOCKLND_CONN_BULK_IN;
> } else {
> - LASSERT(wanted & (1 << SOCKLND_CONN_BULK_OUT));
> + LASSERT(wanted & BIT(SOCKLND_CONN_BULK_OUT));
> type = SOCKLND_CONN_BULK_OUT;
> }
>
> diff --git a/drivers/staging/lustre/lnet/lnet/lib-ptl.c b/drivers/staging/lustre/lnet/lnet/lib-ptl.c
> index 63cce0c4a065..33332724ab94 100644
> --- a/drivers/staging/lustre/lnet/lnet/lib-ptl.c
> +++ b/drivers/staging/lustre/lnet/lnet/lib-ptl.c
> @@ -334,7 +334,7 @@ lnet_mt_test_exhausted(struct lnet_match_table *mtable, int pos)
> bmap = &mtable->mt_exhausted[pos >> LNET_MT_BITS_U64];
> pos &= (1 << LNET_MT_BITS_U64) - 1;
>
> - return (*bmap & (1ULL << pos));
> + return (*bmap & BIT(pos));
> }
>
> static void
> diff --git a/drivers/staging/lustre/lustre/llite/lproc_llite.c b/drivers/staging/lustre/lustre/llite/lproc_llite.c
> index 40f1fcf8b5c0..c742cba60199 100644
> --- a/drivers/staging/lustre/lustre/llite/lproc_llite.c
> +++ b/drivers/staging/lustre/lustre/llite/lproc_llite.c
> @@ -1308,7 +1308,7 @@ static void ll_display_extents_info(struct ll_rw_extents_info *io_extents,
> r, pct(r, read_tot), pct(read_cum, read_tot),
> w, pct(w, write_tot), pct(write_cum, write_tot));
> start = end;
> - if (start == 1 << 10) {
> + if (start == 1024) {
> start = 1;
> units += 10;
> unitp++;
> --
> 2.11.0
>
Cheers, Andreas
--
Andreas Dilger
Lustre Principal Architect
Intel Corporation
prev parent reply other threads:[~2017-03-23 20:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-22 15:53 [PATCH v2] staging: lustre: Replace a bit shift by a use of BIT Arushi Singhal
2017-03-23 20:41 ` Dilger, Andreas [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1BE44C84-0DDB-4D9E-B4CB-C8A979F48EC6@intel.com \
--to=andreas.dilger@intel.com \
--cc=arushisinghal19971997@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=jsimmons@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lustre-devel@lists.lustre.org \
--cc=oleg.drokin@intel.com \
--cc=outreachy-kernel@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox