[PATCH 6/9] [media] tm6000: Use common error handling code in tm6000_cards_setup()

[SF Markus Elfring <elfring@users.sourceforge.net>]

From: Markus Elfring <elfring@users.sourceforge.net>
Date: Thu, 14 Sep 2017 16:26:42 +0200

Add a jump target so that a bit of exception handling can be better reused
in this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
 drivers/media/usb/tm6000/tm6000-cards.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/media/usb/tm6000/tm6000-cards.c b/drivers/media/usb/tm6000/tm6000-cards.c
index 72dd6b80394f..502e0b38b7f1 100644
--- a/drivers/media/usb/tm6000/tm6000-cards.c
+++ b/drivers/media/usb/tm6000/tm6000-cards.c
@@ -872,15 +872,14 @@ int tm6000_cards_setup(struct tm6000_core *dev)
 		for (i = 0; i < 2; i++) {
 			rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 						dev->gpio.tuner_reset, 0x00);
-			if (rc < 0) {
-				printk(KERN_ERR "Error %i doing tuner reset\n", rc);
-				return rc;
-			}
+			if (rc < 0)
+				goto report_failure;
 
 			msleep(10); /* Just to be conservative */
 			rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 						dev->gpio.tuner_reset, 0x01);
 			if (rc < 0) {
+report_failure:
 				printk(KERN_ERR "Error %i doing tuner reset\n", rc);
 				return rc;
 			}
-- 
2.14.1