public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Robin Murphy <robin.murphy@arm.com>
To: honghui.zhang@mediatek.com, joro@8bytes.org,
	matthias.bgg@gmail.com, robh@kernel.org
Cc: srv_heupstream@mediatek.com, catalin.marinas@arm.com,
	linux-kernel@vger.kernel.org, iommu@lists.linux-foundation.org,
	linux-mediatek@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org, youlin.pei@mediatek.com,
	erin.lo@mediatek.com
Subject: Re: [PATCH] memory: mtk-smi: Use of_device_get_match_data helper
Date: Wed, 26 Jul 2017 11:36:52 +0100	[thread overview]
Message-ID: <1d31eedd-fdab-bd6f-65b1-c0e8b79a8888@arm.com> (raw)
In-Reply-To: <1501063150-8778-1-git-send-email-honghui.zhang@mediatek.com>

On 26/07/17 10:59, honghui.zhang@mediatek.com wrote:
> From: Honghui Zhang <honghui.zhang@mediatek.com>
> 
> Replace custom code with generic helper to retrieve driver data.
> 
> Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
> ---
>  drivers/memory/mtk-smi.c | 18 ++++--------------
>  1 file changed, 4 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> index 4afbc41..fe8b81a 100644
> --- a/drivers/memory/mtk-smi.c
> +++ b/drivers/memory/mtk-smi.c
> @@ -240,20 +240,15 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
>  	struct device *dev = &pdev->dev;
>  	struct device_node *smi_node;
>  	struct platform_device *smi_pdev;
> -	const struct of_device_id *of_id;
>  
>  	if (!dev->pm_domain)
>  		return -EPROBE_DEFER;
>  
> -	of_id = of_match_node(mtk_smi_larb_of_ids, pdev->dev.of_node);
> -	if (!of_id)
> -		return -EINVAL;
> -
>  	larb = devm_kzalloc(dev, sizeof(*larb), GFP_KERNEL);
>  	if (!larb)
>  		return -ENOMEM;
>  
> -	larb->larb_gen = of_id->data;
> +	larb->larb_gen = of_device_get_match_data(dev);
>  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	larb->base = devm_ioremap_resource(dev, res);
>  	if (IS_ERR(larb->base))
> @@ -319,8 +314,7 @@ static int mtk_smi_common_probe(struct platform_device *pdev)
>  	struct device *dev = &pdev->dev;
>  	struct mtk_smi *common;
>  	struct resource *res;
> -	const struct of_device_id *of_id;
> -	enum mtk_smi_gen smi_gen;
> +	const enum mtk_smi_gen *smi_gen;
>  
>  	if (!dev->pm_domain)
>  		return -EPROBE_DEFER;
> @@ -338,18 +332,14 @@ static int mtk_smi_common_probe(struct platform_device *pdev)
>  	if (IS_ERR(common->clk_smi))
>  		return PTR_ERR(common->clk_smi);
>  
> -	of_id = of_match_node(mtk_smi_common_of_ids, pdev->dev.of_node);
> -	if (!of_id)
> -		return -EINVAL;
> -
>  	/*
>  	 * for mtk smi gen 1, we need to get the ao(always on) base to config
>  	 * m4u port, and we need to enable the aync clock for transform the smi
>  	 * clock into emi clock domain, but for mtk smi gen2, there's no smi ao
>  	 * base.
>  	 */
> -	smi_gen = (enum mtk_smi_gen)of_id->data;
> -	if (smi_gen == MTK_SMI_GEN1) {
> +	smi_gen = of_device_get_match_data(dev);

The data you're retrieving is the exact same thing as of_id->data was,
i.e. an enum mtk_smi_gen cast to void*, so dereferencing it is not a
good idea. The first patch was almost right; you just need to keep the
cast in the assignment to smi_gen.

Robin.

> +	if (*smi_gen == MTK_SMI_GEN1) {
>  		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  		common->smi_ao_base = devm_ioremap_resource(dev, res);
>  		if (IS_ERR(common->smi_ao_base))
> 

  reply	other threads:[~2017-07-26 10:36 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-26  9:59 [PATCH] memory: mtk-smi: Use of_device_get_match_data helper honghui.zhang
2017-07-26 10:36 ` Robin Murphy [this message]
2017-07-26 12:35   ` Honghui Zhang
  -- strict thread matches above, loose matches on Subject: below --
2017-07-26  9:52 honghui.zhang
2017-07-30  0:45 ` kbuild test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1d31eedd-fdab-bd6f-65b1-c0e8b79a8888@arm.com \
    --to=robin.murphy@arm.com \
    --cc=catalin.marinas@arm.com \
    --cc=erin.lo@mediatek.com \
    --cc=honghui.zhang@mediatek.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=robh@kernel.org \
    --cc=srv_heupstream@mediatek.com \
    --cc=youlin.pei@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox