From: Sinan Kaya <okaya@codeaurora.org>
To: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: dmaengine <dmaengine@vger.kernel.org>,
Timur Tabi <timur@codeaurora.org>,
linux-arm-msm@vger.kernel.org,
linux-arm Mailing List <linux-arm-kernel@lists.infradead.org>,
Dan Williams <dan.j.williams@intel.com>,
Vinod Koul <vinod.koul@intel.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 2/2] dmaengine: dmatest: add support for memset test
Date: Wed, 28 Jun 2017 21:54:14 -0400 [thread overview]
Message-ID: <1e6151c9-693b-335a-2e4f-bcf201e77b6d@codeaurora.org> (raw)
In-Reply-To: <CAHp75Vdw2orpkx4C+O6CLHBWOUDrS8rWPuuDV0DzOCqu8kWkGQ@mail.gmail.com>
Hi Andy,
On 6/28/2017 4:58 AM, Andy Shevchenko wrote:
> On Wed, Jun 28, 2017 at 3:46 AM, Sinan Kaya <okaya@codeaurora.org> wrote:
>>
>> echo dma0chan0 > /sys/module/dmatest/parameters/channel
>> echo 2 > /sys/module/dmatest/parameters/dmatest
>> echo 2000 > /sys/module/dmatest/parameters/timeout
>> echo 10 > /sys/module/dmatest/parameters/iterations
>> echo 1 > /sys/module/dmatest/parameters/run
>
> Good someone is developing tests!
> My comments below.
Yeah, no problem.
>
>> static void dmatest_init_srcs(u8 **bufs, unsigned int start, unsigned int len,
>> + unsigned int buf_size, bool is_memset)
>> {
>> unsigned int i;
>> u8 *buf;
>>
>> for (; (buf = *bufs); bufs++) {
>> + for (i = 0; i < start; i++) {
>
>> + unsigned int val = is_memset ? PATTERN_MEMSET_IDX : i;
>> +
>> + buf[i] = PATTERN_SRC | (~val & PATTERN_COUNT_MASK);
>
>> + unsigned int val = is_memset ? PATTERN_MEMSET_IDX : i;
>> +
>> buf[i] = PATTERN_SRC | PATTERN_COPY
>> + | (~val & PATTERN_COUNT_MASK);
>
>> + unsigned int val = is_memset ? PATTERN_MEMSET_IDX : i;
>> +
>> + buf[i] = PATTERN_SRC | (~val & PATTERN_COUNT_MASK);
>
> Looks like a candidate now for a helper function
>
> static inline u8 gen_src_value(u8 index, bool is_memset)
> {
> u8 val = is_memset ? PATTERN_MEMSET_IDX : i;
> return PATTERN_SRC | (~val & PATTERN_COUNT_MASK);
> }
>
> buf[i] = gen_src_value(i, is_memset);
> buf[i] = gen_src_value(i, is_memset) | PATTERN_COPY;
> buf[i] = gen_src_value(i, is_memset);
will change as you recommended.
>
>> + unsigned int val = is_memset ? PATTERN_MEMSET_IDX : i;
>> +
>> + buf[i] = PATTERN_DST | (~val & PATTERN_COUNT_MASK);
>
>> + unsigned int val = is_memset ? PATTERN_MEMSET_IDX : i;
>> +
>> buf[i] = PATTERN_DST | PATTERN_OVERWRITE
>> + | (~val & PATTERN_COUNT_MASK);
>
>> + unsigned int val = is_memset ? PATTERN_MEMSET_IDX : i;
>> +
>> + buf[i] = PATTERN_DST | (~val & PATTERN_COUNT_MASK);
>
> Ditto for DST.
done.
>
>> + unsigned int counter, bool is_srcbuf, bool is_memset)
>
> This is a signal to replace it with
>
> unsigned int flags
>
> #define DMATEST_FL_SRCBUF BIT(0)
> #define DMATEST_FL_MEMSET BIT(1)
>
> or alike.
>
> I'm not insisting, just consider an opportunity.
OK. I'm not touching it for the moment. Maybe, we can have another patch later
to get rid of flags.
>
>> + bool is_srcbuf, bool is_memset)
>
> Ditto.
>
>> start = ktime_get();
>> +
>> pr_debug("%s: verifying source buffer...\n", current->comm);
>
> The change doesn't belong to the patch.
>
>> +
>> error_count += dmatest_verify(thread->dsts, dst_off + len,
>
> Ditto.
>
Posted V2 with the change now.
Sinan
--
Sinan Kaya
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
prev parent reply other threads:[~2017-06-29 1:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-28 0:46 [PATCH 1/2] dmaengine: qcom_hidma: introduce memset support Sinan Kaya
2017-06-28 0:46 ` [PATCH 2/2] dmaengine: dmatest: add support for memset test Sinan Kaya
2017-06-28 8:58 ` Andy Shevchenko
2017-06-29 1:54 ` Sinan Kaya [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1e6151c9-693b-335a-2e4f-bcf201e77b6d@codeaurora.org \
--to=okaya@codeaurora.org \
--cc=andy.shevchenko@gmail.com \
--cc=dan.j.williams@intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=timur@codeaurora.org \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox