Re: [PATCH V6 0/4] Add C3 SoC PLLs and Peripheral clock

[Jerome Brunet <jbrunet@baylibre.com>]

On Fri 10 Nov 2023 at 14:20, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:

> On 06/11/2023 09:55, Xianwei Zhao wrote:
>> The patchset adds support for the peripheral and PLL clock controller
>> found on the Amlogic C3 SoC family, such as C302X or C308L.
>> 
>> Changes since V5 [3]:
>>  - Fix some typo and modify formart for MARCO. Suggested by Jerome.
>>  - Add pad clock for peripheral input clock in bindings.
>>  - Add some description for explaining why ddr_dpll_pt_clk and cts_msr_clk are out of tree.
>> Changes since V4 [10]:
>>  - Change some fw_name of clocks. Suggested by Jerome.
>>  - Delete minItem of clocks.
>>  - Add CLk_GET_RATE_NOCACHE flags for gp1_pll
>>  - Fix some format. and fix width as 8 for mclk_pll_dco.
>>  - exchange gate and divder for fclk_50m clock.
>>  - add CLK_SET_RATE_PARENT for axi_a_divder & axi_b_divder.
>>  - add CLK_IS_CRITICAL for axi_clk
>>  - Optimized macro define for pwm clk.
>>  - add cts_oscin_clk mux between 24M and 32k
>>  - add some missing gate clock, such as ddr_pll.
>
> Where are all these versions? Please provide links.

I have provided some guidance offline at the request of Amlogic.

This should have been v4 and the cover-letter should have summarized the
change from v3 to this. Unfortunately it was sent as v6 :/

>
> Best regards,
> Krzysztof