From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-wm1-f53.google.com (mail-wm1-f53.google.com [209.85.128.53]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 1050519F13A for ; Tue, 24 Sep 2024 14:45:41 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.128.53 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1727189144; cv=none; b=nFWAT0SbrZo18766Y+w+x3zkG4fq4RwvgZRHz5o8bAfMo1VP5uoOmeylS4MsiNaje3h+1tT+77C9suDBFdcaFgmNlJuOmlA3iXEd96b1I7AnS09Nh6kidAxVYx3FjfflmVepZVsrh2ktmDO637/F9QnKDCkco5Lt9QFX+laeh3Q= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1727189144; c=relaxed/simple; bh=8fJ1xVgDM38wnQzePT334R11xflYMbZ9NvMk3uALwpQ=; h=From:To:Cc:Subject:In-Reply-To:References:Date:Message-ID: MIME-Version:Content-Type; b=UnNotuJTZYLkLun93PunXajsd6zfMc+MZuM03/lRYQAjJb+qtUNDJLgsSTmmI18embCoA4WiJPsS+V6dEyhyStQlpeikn0F8TQC1RXfDu6sUwJrxx2rskuX6rVVVHXbBd73ZbHD+ywFGpXuqVD8eExjVS9YuJfzK0ZlEY2MbsWQ= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=baylibre.com; spf=pass smtp.mailfrom=baylibre.com; dkim=pass (2048-bit key) header.d=baylibre-com.20230601.gappssmtp.com header.i=@baylibre-com.20230601.gappssmtp.com header.b=FrY9Udx8; arc=none smtp.client-ip=209.85.128.53 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=baylibre.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=baylibre.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=baylibre-com.20230601.gappssmtp.com header.i=@baylibre-com.20230601.gappssmtp.com header.b="FrY9Udx8" Received: by mail-wm1-f53.google.com with SMTP id 5b1f17b1804b1-42cbface8d6so72352425e9.3 for ; Tue, 24 Sep 2024 07:45:41 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20230601.gappssmtp.com; s=20230601; t=1727189140; x=1727793940; darn=vger.kernel.org; h=mime-version:message-id:date:references:in-reply-to:subject:cc:to :from:from:to:cc:subject:date:message-id:reply-to; bh=eagbcf49QwIVxdJDLPSGMzMNC9Pcuf/EG2UvHVQ/FqM=; b=FrY9Udx8Lpe8J0AEMc/j3Pe2qQmCAUgleV60GoCyoUrIA+OZHpmErjD8lnY5sX1etk Aunu/oplUCj1xodcg/ydTxNloZN6UF3nJjhh88XdFS8SJ5d7IhqYnKOjw1zil9nGfCA3 oSzQ5dQXjYhjOS/jVatYUJm35ZE0N/S7ybJDzo3oD+r5+ZMFQgQvq7hrqjVnGr7GDtld SaAwpXtd8db46SXQUdkIp8DXVCdZBkP9Nu7/PJjtq5hVV0IhGrCbgcp2M9/5X/bE17q0 VMGcOPrF1cwzAbwnrvFHEjgDONi2CxSm1dW1KHQI0fK2cW6WIlqu7i6Ss1IQKfyjK3Qg M3fQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1727189140; x=1727793940; h=mime-version:message-id:date:references:in-reply-to:subject:cc:to :from:x-gm-message-state:from:to:cc:subject:date:message-id:reply-to; bh=eagbcf49QwIVxdJDLPSGMzMNC9Pcuf/EG2UvHVQ/FqM=; b=VBR9f7KKvU1qF+BWroMkN3jyoWM7artiPui6RDvP0gC4jr8EwuAk86D9YXg24TmFv0 cpsb9tIN0kZGqPbG3yZ5uifGadLbCH84iVOROWXTumjCsM7gGYPHZgPw9m1x5BzhTZv6 PzltAlbJW84/DYafd7j3fswU3TVRPTs6Nzu+BLINipPTflc4vBolEQuL3ZZV468bWyXl 2wrNIj7wJsotaPEF5cu3Kh23gQ2cy0SnnWsZqdUFlR1p/Br6CdxwmqhY7d/DlKtiR739 4e3J9GCZLNsGjdD9ppcxZeXkS7Bg6CcT2MMh0PSfpZayH6l4ubU0ScKNMG9o+HwdC3V0 fZCQ== X-Forwarded-Encrypted: i=1; AJvYcCUSnglvolnFcfwq1d0EOvwiQ853hVUMOefyrhM3NZ44LyR8lHKD4XFDyDld+nzaVqTyHNCQrGHMsYbGiYo=@vger.kernel.org X-Gm-Message-State: AOJu0YxmDwmysIfpxlbpipV13zGTBmLkOwk7kDubFSsots1plwwVpukB wxRw6TVP0Zy67jn0qtSl9WsURLuihxKROg9q3hekH1W8Dkacc2UVe4SeBBNrpnc= X-Google-Smtp-Source: AGHT+IFu15CuZ6N50yhEMtqiJrUBUKg6wYBq1hIpHy7prWSVUCUaf5R0kOjGgpSxD/LbnqEGD5hSVg== X-Received: by 2002:adf:f292:0:b0:374:d254:61b3 with SMTP id ffacd0b85a97d-37a42277de5mr13733204f8f.14.1727189140264; Tue, 24 Sep 2024 07:45:40 -0700 (PDT) Received: from localhost ([2a01:e0a:3c5:5fb1:e1a:2f3f:4335:573b]) by smtp.gmail.com with ESMTPSA id ffacd0b85a97d-37cbc2f9828sm1800496f8f.73.2024.09.24.07.45.37 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 24 Sep 2024 07:45:39 -0700 (PDT) From: Jerome Brunet To: Xianwei Zhao via B4 Relay Cc: Neil Armstrong , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Chuan Liu , Kevin Hilman , Martin Blumenstingl , xianwei.zhao@amlogic.com, linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: Re: [PATCH 4/5] clk: meson: add support for the A5 SoC PLL clock In-Reply-To: <20240914-a5-clk-v1-4-5ee2c4f1b08c@amlogic.com> (Xianwei Zhao via's message of "Sat, 14 Sep 2024 13:25:26 +0800") References: <20240914-a5-clk-v1-0-5ee2c4f1b08c@amlogic.com> <20240914-a5-clk-v1-4-5ee2c4f1b08c@amlogic.com> Date: Tue, 24 Sep 2024 16:45:37 +0200 Message-ID: <1jplotxg8e.fsf@starbuckisacylon.baylibre.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain On Sat 14 Sep 2024 at 13:25, Xianwei Zhao via B4 Relay wrote: > From: Chuan Liu > > Add the PLL clock controller driver for the Amlogic A5 SoC family. > > Signed-off-by: Chuan Liu > Signed-off-by: Xianwei Zhao > --- > drivers/clk/meson/Kconfig | 14 ++ > drivers/clk/meson/Makefile | 1 + > drivers/clk/meson/a5-pll.c | 553 +++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 568 insertions(+) > > diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig > index 78f648c9c97d..2a713276e46c 100644 > --- a/drivers/clk/meson/Kconfig > +++ b/drivers/clk/meson/Kconfig > @@ -132,6 +132,20 @@ config COMMON_CLK_A1_PERIPHERALS > device, A1 SoC Family. Say Y if you want A1 Peripherals clock > controller to work. > > +config COMMON_CLK_A5_PLL > + tristate "Amlogic A5 PLL clock controller" > + depends on ARM64 > + default y > + imply ARM_SCMI_PROTOCOL don't think this is needed, same as c3 > + imply COMMON_CLK_SCMI > + select COMMON_CLK_MESON_REGMAP > + select COMMON_CLK_MESON_PLL > + select COMMON_CLK_MESON_CLKC_UTILS > + help > + Support for the PLL clock controller on Amlogic AV40x device, AKA A5. > + Say Y if you want the board to work, because PLLs are the parent > + of most peripherals. > + > config COMMON_CLK_C3_PLL > tristate "Amlogic C3 PLL clock controller" > depends on ARM64 > diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile > index bc56a47931c1..fc4b8a723145 100644 > --- a/drivers/clk/meson/Makefile > +++ b/drivers/clk/meson/Makefile > @@ -20,6 +20,7 @@ obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o > obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o > obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o > obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o > +obj-$(CONFIG_COMMON_CLK_A5_PLL) += a5-pll.o > obj-$(CONFIG_COMMON_CLK_C3_PLL) += c3-pll.o > obj-$(CONFIG_COMMON_CLK_C3_PERIPHERALS) += c3-peripherals.o > obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o > diff --git a/drivers/clk/meson/a5-pll.c b/drivers/clk/meson/a5-pll.c > new file mode 100644 > index 000000000000..d96ed72ef8d4 > --- /dev/null > +++ b/drivers/clk/meson/a5-pll.c > @@ -0,0 +1,553 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Amlogic A5 PLL Controller Driver > + * > + * Copyright (c) 2024 Amlogic, inc. > + * Author: Chuan Liu > + */ > + > +#include > +#include > +#include "clk-regmap.h" > +#include "clk-pll.h" > +#include "clk-mpll.h" Kconfig does not select support for this, so something is odd. > +#include "meson-clkc-utils.h" > +#include > + > +#define ANACTRL_FIXPLL_CTRL1 0x44 > +#define ANACTRL_GP0PLL_CTRL0 0x80 > +#define ANACTRL_GP0PLL_CTRL1 0x84 > +#define ANACTRL_GP0PLL_CTRL2 0x88 > +#define ANACTRL_GP0PLL_CTRL3 0x8c > +#define ANACTRL_GP0PLL_CTRL4 0x90 > +#define ANACTRL_GP0PLL_CTRL5 0x94 > +#define ANACTRL_GP0PLL_CTRL6 0x98 > +#define ANACTRL_HIFIPLL_CTRL0 0x100 > +#define ANACTRL_HIFIPLL_CTRL1 0x104 > +#define ANACTRL_HIFIPLL_CTRL2 0x108 > +#define ANACTRL_HIFIPLL_CTRL3 0x10c > +#define ANACTRL_HIFIPLL_CTRL4 0x110 > +#define ANACTRL_HIFIPLL_CTRL5 0x114 > +#define ANACTRL_HIFIPLL_CTRL6 0x118 > +#define ANACTRL_MPLL_CTRL0 0x180 > +#define ANACTRL_MPLL_CTRL1 0x184 > +#define ANACTRL_MPLL_CTRL2 0x188 > +#define ANACTRL_MPLL_CTRL3 0x18c > +#define ANACTRL_MPLL_CTRL4 0x190 > +#define ANACTRL_MPLL_CTRL5 0x194 > +#define ANACTRL_MPLL_CTRL6 0x198 > +#define ANACTRL_MPLL_CTRL7 0x19c > +#define ANACTRL_MPLL_CTRL8 0x1a0 > + > +static DEFINE_SPINLOCK(aml_clk_lock); Re-submit you lock patch first and adjust please. > + > +static struct clk_fixed_factor mpll_prediv = { > + .mult = 1, > + .div = 2, > + .hw.init = &(struct clk_init_data){ > + .name = "mpll_prediv", > + .ops = &clk_fixed_factor_ops, > + .parent_data = &(const struct clk_parent_data) { > + .fw_name = "fix_dco" > + }, > + .num_parents = 1, > + }, > +}; > + > +static const struct reg_sequence mpll0_init_regs[] = { > + { .reg = ANACTRL_MPLL_CTRL2, .def = 0x40000033 }, > +}; > + > +static struct clk_regmap mpll0_div = { > + .data = &(struct meson_clk_mpll_data){ > + .sdm = { > + .reg_off = ANACTRL_MPLL_CTRL1, > + .shift = 0, > + .width = 14, > + }, > + .sdm_en = { > + .reg_off = ANACTRL_MPLL_CTRL1, > + .shift = 30, > + .width = 1, > + }, > + .n2 = { > + .reg_off = ANACTRL_MPLL_CTRL1, > + .shift = 20, > + .width = 9, > + }, > + .ssen = { > + .reg_off = ANACTRL_MPLL_CTRL1, > + .shift = 29, > + .width = 1, > + }, > + .lock = &aml_clk_lock, > + .init_regs = mpll0_init_regs, > + .init_count = ARRAY_SIZE(mpll0_init_regs), > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "mpll0_div", > + .ops = &meson_clk_mpll_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &mpll_prediv.hw > + }, > + .num_parents = 1, > + }, > +}; > + > +static struct clk_regmap mpll0 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = ANACTRL_MPLL_CTRL1, > + .bit_idx = 31, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "mpll0", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &mpll0_div.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct reg_sequence mpll1_init_regs[] = { > + { .reg = ANACTRL_MPLL_CTRL4, .def = 0x40000033 }, > +}; > + > +static struct clk_regmap mpll1_div = { > + .data = &(struct meson_clk_mpll_data){ > + .sdm = { > + .reg_off = ANACTRL_MPLL_CTRL3, > + .shift = 0, > + .width = 14, > + }, > + .sdm_en = { > + .reg_off = ANACTRL_MPLL_CTRL3, > + .shift = 30, > + .width = 1, > + }, > + .n2 = { > + .reg_off = ANACTRL_MPLL_CTRL3, > + .shift = 20, > + .width = 9, > + }, > + .ssen = { > + .reg_off = ANACTRL_MPLL_CTRL3, > + .shift = 29, > + .width = 1, > + }, > + .lock = &aml_clk_lock, > + .init_regs = mpll1_init_regs, > + .init_count = ARRAY_SIZE(mpll1_init_regs), > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "mpll1_div", > + .ops = &meson_clk_mpll_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &mpll_prediv.hw > + }, > + .num_parents = 1, > + }, > +}; > + > +static struct clk_regmap mpll1 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = ANACTRL_MPLL_CTRL3, > + .bit_idx = 31, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "mpll1", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &mpll1_div.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct reg_sequence mpll2_init_regs[] = { > + { .reg = ANACTRL_MPLL_CTRL6, .def = 0x40000033 }, > +}; > + > +static struct clk_regmap mpll2_div = { > + .data = &(struct meson_clk_mpll_data){ > + .sdm = { > + .reg_off = ANACTRL_MPLL_CTRL5, > + .shift = 0, > + .width = 14, > + }, > + .sdm_en = { > + .reg_off = ANACTRL_MPLL_CTRL5, > + .shift = 30, > + .width = 1, > + }, > + .n2 = { > + .reg_off = ANACTRL_MPLL_CTRL5, > + .shift = 20, > + .width = 9, > + }, > + .ssen = { > + .reg_off = ANACTRL_MPLL_CTRL5, > + .shift = 29, > + .width = 1, > + }, > + .lock = &aml_clk_lock, > + .init_regs = mpll2_init_regs, > + .init_count = ARRAY_SIZE(mpll2_init_regs), > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "mpll2_div", > + .ops = &meson_clk_mpll_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &mpll_prediv.hw > + }, > + .num_parents = 1, > + }, > +}; > + > +static struct clk_regmap mpll2 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = ANACTRL_MPLL_CTRL5, > + .bit_idx = 31, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "mpll2", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &mpll2_div.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct reg_sequence mpll3_init_regs[] = { > + { .reg = ANACTRL_MPLL_CTRL8, .def = 0x40000033 }, > +}; > + > +static struct clk_regmap mpll3_div = { > + .data = &(struct meson_clk_mpll_data){ > + .sdm = { > + .reg_off = ANACTRL_MPLL_CTRL7, > + .shift = 0, > + .width = 14, > + }, > + .sdm_en = { > + .reg_off = ANACTRL_MPLL_CTRL7, > + .shift = 30, > + .width = 1, > + }, > + .n2 = { > + .reg_off = ANACTRL_MPLL_CTRL7, > + .shift = 20, > + .width = 9, > + }, > + .ssen = { > + .reg_off = ANACTRL_MPLL_CTRL7, > + .shift = 29, > + .width = 1, > + }, > + .lock = &aml_clk_lock, > + .init_regs = mpll3_init_regs, > + .init_count = ARRAY_SIZE(mpll3_init_regs), > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "mpll3_div", > + .ops = &meson_clk_mpll_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &mpll_prediv.hw > + }, > + .num_parents = 1, > + }, > +}; > + > +static struct clk_regmap mpll3 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = ANACTRL_MPLL_CTRL7, > + .bit_idx = 31, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "mpll3", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &mpll3_div.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct reg_sequence gp0_init_regs[] = { > + { .reg = ANACTRL_GP0PLL_CTRL0, .def = 0X08000000 }, > + { .reg = ANACTRL_GP0PLL_CTRL1, .def = 0x00000000 }, > + { .reg = ANACTRL_GP0PLL_CTRL2, .def = 0x00000000 }, > + { .reg = ANACTRL_GP0PLL_CTRL3, .def = 0x6a295c00 }, > + { .reg = ANACTRL_GP0PLL_CTRL4, .def = 0x65771290 }, > + { .reg = ANACTRL_GP0PLL_CTRL5, .def = 0x3927200a }, > + { .reg = ANACTRL_GP0PLL_CTRL6, .def = 0x54540000 } > +}; > + > +static const struct pll_mult_range gp0_pll_mult_range = { > + .min = 125, > + .max = 250, > +}; > + > +static struct clk_regmap gp0_pll_dco = { > + .data = &(struct meson_clk_pll_data) { > + .en = { > + .reg_off = ANACTRL_GP0PLL_CTRL0, > + .shift = 28, > + .width = 1, > + }, > + .m = { > + .reg_off = ANACTRL_GP0PLL_CTRL0, > + .shift = 0, > + .width = 8, > + }, > + .frac = { > + .reg_off = ANACTRL_GP0PLL_CTRL1, > + .shift = 0, > + .width = 17, > + }, > + .n = { > + .reg_off = ANACTRL_GP0PLL_CTRL0, > + .shift = 10, > + .width = 5, > + }, > + .l = { > + .reg_off = ANACTRL_GP0PLL_CTRL0, > + .shift = 31, > + .width = 1, > + }, > + .rst = { > + .reg_off = ANACTRL_GP0PLL_CTRL0, > + .shift = 29, > + .width = 1, > + }, > + .range = &gp0_pll_mult_range, > + .init_regs = gp0_init_regs, > + .init_count = ARRAY_SIZE(gp0_init_regs), > + .frac_max = 100000, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "gp0_pll_dco", > + .ops = &meson_clk_pll_ops, > + .parent_data = &(const struct clk_parent_data) { > + .fw_name = "xtal_24m", > + }, > + .num_parents = 1, > + }, > +}; > + > +/* The maximum frequency divider supports is 16, not 128(2^7) */ > +static const struct clk_div_table gp0_pll_od_table[] = { > + { 0, 1 }, > + { 1, 2 }, > + { 2, 4 }, > + { 3, 8 }, > + { 4, 16 }, > + { 5, 32 }, > + { /* sentinel */ } > +}; > + > +static struct clk_regmap gp0_pll = { > + .data = &(struct clk_regmap_div_data) { > + .offset = ANACTRL_GP0PLL_CTRL0, > + .shift = 16, > + .width = 3, > + .table = gp0_pll_od_table, > + .flags = CLK_DIVIDER_POWER_OF_TWO, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "gp0_pll", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &gp0_pll_dco.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct reg_sequence hifi_init_regs[] = { > + { .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0X08000000 }, What is bit you are flipping in CTRL0 ? it is suspicious > + { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x00000000 }, > + { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00000000 }, > + { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x6a295c00 }, > + { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x65771290 }, > + { .reg = ANACTRL_HIFIPLL_CTRL5, .def = 0x3927200a }, > + { .reg = ANACTRL_HIFIPLL_CTRL6, .def = 0x54540000 } > +}; > + > +static const struct pll_mult_range hifi_pll_mult_range = { > + .min = 125, > + .max = 250, > +}; > + > +static struct clk_regmap hifi_pll_dco = { > + .data = &(struct meson_clk_pll_data) { > + .en = { > + .reg_off = ANACTRL_HIFIPLL_CTRL0, > + .shift = 28, > + .width = 1, > + }, > + .m = { > + .reg_off = ANACTRL_HIFIPLL_CTRL0, > + .shift = 0, > + .width = 8, > + }, > + .frac = { > + .reg_off = ANACTRL_HIFIPLL_CTRL1, > + .shift = 0, > + .width = 17, > + }, > + .n = { > + .reg_off = ANACTRL_HIFIPLL_CTRL0, > + .shift = 10, > + .width = 5, > + }, > + .l = { > + .reg_off = ANACTRL_HIFIPLL_CTRL0, > + .shift = 31, > + .width = 1, > + }, > + .rst = { > + .reg_off = ANACTRL_HIFIPLL_CTRL0, > + .shift = 29, > + .width = 1, > + }, > + .range = &hifi_pll_mult_range, > + .init_regs = hifi_init_regs, > + .init_count = ARRAY_SIZE(hifi_init_regs), > + .frac_max = 100000, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hifi_pll_dco", > + .ops = &meson_clk_pll_ops, > + .parent_data = &(const struct clk_parent_data) { > + .fw_name = "xtal_24m", > + }, > + .num_parents = 1, > + }, > +}; > + > +/* The maximum frequency divider supports is 16, not 128(2^7) */ > +static const struct clk_div_table hifi_pll_od_table[] = { > + { 0, 1 }, > + { 1, 2 }, > + { 2, 4 }, > + { 3, 8 }, Why don't you ajust the mask then ? Looks like a POW_OF_2 basic dividider to me. > + { /* sentinel */ } > +}; > + > +static struct clk_regmap hifi_pll = { > + .data = &(struct clk_regmap_div_data) { > + .offset = ANACTRL_HIFIPLL_CTRL0, > + .shift = 16, > + .width = 3, > + .table = hifi_pll_od_table, > + .flags = CLK_DIVIDER_POWER_OF_TWO, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hifi_pll", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &hifi_pll_dco.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_hw *a5_pll_hw_clks[] = { > + [CLKID_MPLL_PREDIV] = &mpll_prediv.hw, > + [CLKID_MPLL0_DIV] = &mpll0_div.hw, > + [CLKID_MPLL0] = &mpll0.hw, > + [CLKID_MPLL1_DIV] = &mpll1_div.hw, > + [CLKID_MPLL1] = &mpll1.hw, > + [CLKID_MPLL2_DIV] = &mpll2_div.hw, > + [CLKID_MPLL2] = &mpll2.hw, > + [CLKID_MPLL3_DIV] = &mpll3_div.hw, > + [CLKID_MPLL3] = &mpll3.hw, > + [CLKID_GP0_PLL_DCO] = &gp0_pll_dco.hw, > + [CLKID_GP0_PLL] = &gp0_pll.hw, > + [CLKID_HIFI_PLL_DCO] = &hifi_pll_dco.hw, > + [CLKID_HIFI_PLL] = &hifi_pll.hw > +}; > + > +/* Convenience table to populate regmap in .probe */ > +static struct clk_regmap *const a5_pll_clk_regmaps[] = { > + &mpll0_div, > + &mpll0, > + &mpll1_div, > + &mpll1, > + &mpll2_div, > + &mpll2, > + &mpll3_div, > + &mpll3, > + &gp0_pll_dco, > + &gp0_pll, > + &hifi_pll_dco, > + &hifi_pll > +}; > + > +static const struct regmap_config clkc_regmap_config = { > + .reg_bits = 32, > + .val_bits = 32, > + .reg_stride = 4, > + .max_register = ANACTRL_MPLL_CTRL8, > +}; > + > +static struct meson_clk_hw_data a5_pll_clks = { > + .hws = a5_pll_hw_clks, > + .num = ARRAY_SIZE(a5_pll_hw_clks), > +}; > + > +static int aml_a5_pll_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct regmap *regmap; > + void __iomem *base; > + int clkid, ret, i; > + > + base = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(base)) > + return PTR_ERR(base); > + > + regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config); > + if (IS_ERR(regmap)) > + return PTR_ERR(regmap); > + > + /* Populate regmap for the regmap backed clocks */ > + for (i = 0; i < ARRAY_SIZE(a5_pll_clk_regmaps); i++) > + a5_pll_clk_regmaps[i]->map = regmap; > + > + for (clkid = 0; clkid < a5_pll_clks.num; clkid++) { > + /* array might be sparse */ > + if (!a5_pll_clks.hws[clkid]) > + continue; > + > + ret = devm_clk_hw_register(dev, a5_pll_clks.hws[clkid]); > + if (ret) { > + dev_err(dev, "Clock registration failed\n"); > + return ret; > + } > + } > + > + return devm_of_clk_add_hw_provider(dev, meson_clk_hw_get, > + &a5_pll_clks); > +} > + > +static const struct of_device_id a5_pll_clkc_match_table[] = { > + { > + .compatible = "amlogic,a5-pll-clkc", > + }, > + {} > +}; > +MODULE_DEVICE_TABLE(of, a5_pll_clkc_match_table); > + > +static struct platform_driver a5_pll_driver = { > + .probe = aml_a5_pll_probe, > + .driver = { > + .name = "a5-pll-clkc", > + .of_match_table = a5_pll_clkc_match_table, > + }, > +}; > +module_platform_driver(a5_pll_driver); > + > +MODULE_DESCRIPTION("Amlogic A5 PLL Clock Controller driver"); > +MODULE_AUTHOR("Chuan Liu "); > +MODULE_LICENSE("GPL"); -- Jerome