public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: "Jeff V. Merkey" <jmerkey@vger.timpanogas.org>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Linux 2.2.18pre22
Date: Sun, 19 Nov 2000 01:53:03 -0700	[thread overview]
Message-ID: <20001119015303.A25697@vger.timpanogas.org> (raw)
In-Reply-To: <E13xJ14-0002Do-00@the-village.bc.nu>
In-Reply-To: <E13xJ14-0002Do-00@the-village.bc.nu>; from alan@lxorguk.ukuu.org.uk on Sun, Nov 19, 2000 at 01:11:33AM +0000

On Sun, Nov 19, 2000 at 01:11:33AM +0000, Alan Cox wrote:
> 
> Bugs to go: PS/2 mouse detection
> 
> Anything which isnt a strict bug fix or previously agreed is now 2.2.19
> material.
> 
> Alan
> 
> 2.2.18pre22
> o	Fix HZ assumption in USB hub driver		(Oleg Drokin)
> o	Fix ndisc range check on ipv6			(Dave Miller)
> o	Clear other fields in qcam VIDIOCGWIN return	(Damion de Soto)
> o	Fix sparc64 includes for socket.h		(Solar Designer)
> o	ELF platform was misset for Pentium IV		(Mikael Pettersson)
> o	ADMTek 985 ident was wrong			(Lee Bradshaw)
> o	Fix filemark status test on scsi tape		(Robin Miller)
> o	Fix file/block when spacing to tape beginning	(Kai Maiksara)
> o	Small ISDN documentation fixes			(Kai Germaschewski)

Alan, On the ISDN issue, isdn4K-utils seems to be out of sync with 
kernels older than 2.2.16.   Some #define's that used to be in
the 2.2.14 patch don't seem to be in 2.2.17 >.  At present, requires
an ugly .config patch to work under 2.2.18-21.  

Jeff

> o	Resync icn driver with core isdn tree		(Kai Germaschewski)
> o	Fix isdn loopback driver			(Kai Germaschewski)
> o	Fix small leaks in lockd			(Trond Myklebust)
> o	Add Pentium IV rep nop, ident etc		(Various folks,
> 							 notably HPA and
> 							 Linda Wang)
> o	Update sparc default config			(Dave Miller)
> o	Hopefully properly fix the megaraid problem	(Willy Tarreau, AMI
> 							 and others)
> o	Resync tcp bits with Dave			(Dave Miller)
> o	Make cpqarray provide randomness		(Nigel Metheringham)
> o	Fix wavefront symbols bug			(Carlos E. Gorges)
> o	Fix acenic jumbo handling when flushing ring	(Val Hensson)
> o	Fix ace_set_mac_addr for littleendian hosts	(Stephen Hack)
> o	Fix assorted typos in the kernel		(Andries Brouwer)
> o	EEPro100 fixes					(Dragan Stancevic)
> o	Fix hisax _setup crash case			(David Woodhouse)
> o	Fix small cdrom driver bugs			(Jens Axboe)
> o	Fix remaining vmalloc corner cases		(Ben LaHaise)
> o	Update USB maintainers				(Greg Kroah-Hartman)
> o	Fix matroxfb doc bug				(Pavel Rabel)
> o	Fix setscheduler lock inversion 		(Andrew Morton)
> o	Fix scsi unload/sg ioctl oops			(Paul Clements)
> 
> 2.2.18pre21
> o	Environment controller update for sparc		(Eric Brower)
> o	No italian translation for config.help		(Andrea Ferraris)
> o	Fix type error in buz driver			(Pete Zaitcev)
> o	Resnchronize Apple PowerMac codebase		(Paul Mackerras & co)
> o	Merge powermac tree fixes into usb
> o	Powermac input device handling changes
> o	Fix console switch fonts
> o	S/390 merge					(IBM S/390 folks)
> 					(Merge grunt work done by Kurt Roeckx)
> o	Make knfsd TCP an option 			(me)
> o	Drop cisco info packets (0x2000)		(Ivan Passos)
> o	Add belkin USB serial cable			(William Greathouse)
> 
> 2.2.18pre20
> o	Fix ide-probe SMP build error			(Ian Morgan)
> o	Fix appletalk physical layer ioctl handling	(Andi Kleen)
> o	Sparc update					(Dave Miller)
> o	Update Stephen Tweedie's contact info		(Stephen Tweedie)
> o	Fix typo in esp and scsi_obsolete code		(Dave Miller)
> o	Bonding ioctl check fix				(Willy Tarreau)
> o	Fix ipv6 procfs bug				(Al Viro)
> o	Report PIV in proc as family 15 and uname as	(me)
> 	model 6 as discussed
> o	Redo Intel cache decodes as code not tables	(me)
> 	and add new ones  (based on updates by
> 	Asit Mallick & Andrew Ip)
> o	Fix CMOS locking in machine_power_off paths	(me)
> o	Create build tree symlinks only if insmod is
> 	new enough not to be confused by it		(Keith Owens)
> o	Fix cmsg handling				(Philippe Troin)
> o	Tiny xpds driver changes			(Dan Hollis)
> o	Fix vmalloc sign bug				(Ben LaHaise)
> o	SMBFS fixes/changes for find_next problems and	(Urban Widmark)
> 	to avoid truncate bug in netapps
> o	Fix ntfs translation bug			(Anton Altaparmakov)
> o	Fix sparc problem with some soundcards and the	(Jeff Garzik)
> 	_IOC magic
> o	Update ppa driver to v2.05			(Tim Waugh)
> 
> 
> 2.2.18pre19
> o	Fix transproxy socket lookup			(Val Henson)
> o	Add ICS1893 PHY to the SiS900 driver		(Lei-Chun Chang)
> o	Fix documentation error in matroxfb		(Vsevolod Sipakov)
> o	Update IDE floppy maintainer			(Paul Bristow)
> o	Fix remaining cmos locking			(Paul Gortmaker)
> o	Fix sparc bitfield/compiler bits on sound	(Dave Miller)
> o	Update Pegasus USB driver			(Petko Manolov)
> o	Networking updates - move divert header		(Andi Kleen)
> o	Add ETH_P_ATM* defines				(Matti Aarnio)
> o	Fix one more missing GFP_KERNEL/sk->allocation	(Dave Miller)
> o	Fix ISDN multilink handler bug			(Kai Germaschewski)
> o	Fix ymfpci unload cases				(Kai Germaschewski)
> 
> 2.2.18pre18
> o	Fix off by one in net/ipv4/proc			(Dave Miller)
> o	Move the fpu emu patch that got away		(Dave Miller)
> o	K6 update for MTRR ability			(Dave Jones)
> o	Fix raid1/vm deadlock				(Marcelo Tosatti)
> o	Fix usb mouse userspace memory accesses		(David Woodhouse)
> o	Fix xpdsl if compiled in (typo)			(Arjan van de Ven)
> o	Rio fixes for modem handling. Fix a small (Patrick van de Lageweg)
> 	generic serial bug
> o	IBMtr driver fixes for cable pulls, pcmcia	(Burt Silverman,
> 	behaviour etc					 Mike Sullivan)
> o	Tidy up /dev/microcode messages			(Daniel Roesen)
> o	Add arpfilter					(Andi Kleen)
> o	IDE floppy updates for clik support, cleanups	(Paul Bristow)
> o	Fix irongate handling on Alpha			(Soohoon Lee)
> o	Fix HZ=100 assumption in aha152x.c		(me)
> o	Fix power management handling in i810 audio	(me)
> 	(From an ALSA fix by Godmar Back)
> o	Put the NFS block default back to 4K		(Trond Myklebust)
> o	Fix misleading comment in printk code		(Riley Williams)
> o	Fix fbcon scroll back/paste bug			(Herbert Xu)
> o	Fix rtc_lock for ide-probe, and hd.c		(Richard Johnson)
> o	Backport of 2.4 PR_GET/SET_KEEPCAPS		(Brian Brunswick)
> 	(from Chris Evans 2.4 code)
> o	LRU list corruption fix				(Andrea Arcangeli)
> o	Initial gcc 2.96+ support for kernel building	(H J Lu)
> 	| Not a recommended compiler for production kernels...
> o	ALI silence clearing fix			(Ching-Ling Lee)
> o	Fix remaining old-style use of copy_strings	(Solar Designer)
> o	Better pci_resource_start macro for 2.2		(Jeff Garzik)
> o	Fix nbd deadlock				(Marcelo Tosatti)
> 
> 2.2.18pre17
> o	Move a few escaped m68k headers into the right	(me)
> 	directory
> o	Backport 2.4 AF_UNIX garbage collect speedups	(Dave Miller)
> o	TCP fixes for NFS 				(Saadia Khan)
> o	Fix USB audio hangs				(David Woodhouse)
> o	Sparc64 dcache and exec fixes			(Dave Miller)
> o	Fix typing crap in divert.h			(Jeff Garzik)
> o	Use pkt_type in diverter, add maintainer info	(Dave Miller)
> o	Fix obscure NAT problem in FIB code		(Dave Miller)
> o	Fix sk->allocation in TCP sendmsg		(Marcelo Tossati)
> o	Elevator fixes					(Andrea Arcangeli)
> o	Allow broken_suid on NFS root			(Trond Myklebust)
> o	Fix net/ipv6/proc off by one bug		(Dave Miller)
> o	Fix AGP oops on Alpha				(Michal Jaegermann)
> o	MSR/CPUID init call fixes			(Arjan van de Ven)
> o	CS4281 sound hang fixes				(Thomas Woller)
> o	AX.25 comment updates, Joerg has moved email	(Joerg Reuter)
> 
> 2.2.18pre16
> o	Finally get the m68k tree merged		(Andrew McPherson
> 							 and a cast of many)
> o	Bring the sparc back in line, make it build 	(Anton Blanchard)
> o	USB Bluetooth fixes/docs			(Greg Kroah-Hartman)
> o	Fix auth_null credentials bug			(Hai-Pao Fan)
> o	Update cpu flag names 				(Dave Jones)
> o	Console 'quiet' boot option as in 2.4		(Rusty Russell)
> o	Make the sx serial driver work again	(Patrick van de Lageweg)
> o	Fix negotation on the SYM53C1010		(Gerard Roudier)
> o	Fix alpha loops per jiffy			(Jay Estabrook)
> o	Fix pegasus to work with 2.2 kernels		(Greg Kroah-Hartman)
> o	Update plusb driver for 2.2.x			(Eric Ayers, 
> 							 Deti Fliegl)
> o	Fix ohci to use __init				(Greg Kroah-Hartman)
> o	/sbin/hotplug support for USB as in 2.4		(Greg Kroah-Hartman)
> o	Update ksymoops url				(Keith Owens)
> o	Update the changes doc about gcc 		(Petri Kaukasoina)
> o	Fix AMD flag naming				(Ulrich Windl)
> o	Restore old block size on devices after a
> 	partition scan (needed for powermac for one)	(Michael Schmitz)
> o	Fix GPL naming in SubmittingDrivers		(Mike Harris)
> o	NFSv3 server patches merge			(Dave Higgen)
> o	CS46xx changes					(Nils Faerber)
> o	Fix sys_nanosleep for >4GHz CPU changes		(me)
> 	(Spotted by Ben Herrenschmidt)
> o	Fix pas rev D mixer				(??)
> o	Fix multiple spelling errors			(André Dahlqvist)
> o	ISDN updates					(Kai Germaschewski)
> o	XSpeed DSL driver				(Timothy Lee, 
> 							 Dan Hollis)
> o	IDE multi-lun/single-lun handling		(Jens Axboe)
> o	Fix alpha generic trident sound support		(Rich Payne)
> o	Fix PPC for loops per jiffy			(Cort Dougan)
> 
> 2.2.18pre15
> o	Default msdos behaviour to old (small) letters	(me)
> 	| An option 'big' goes with 'small'
> o	Fix define collision in cpqfc			(Arjan van de Ven)
> o	Fix case where scripts/kwhich isnt executable	(me)
> o	Alpha FPU divide fix				(Richard Henderson)
> o	Add ADMtek985 to the tulip list			(J Katz)
> o	Lose excess ymfpci debugging			(Rob Landley)
> o	Fix i2c bus id clash				(Russell King)
> o	Update the ARM vidc driver			(Russell King)
> o	Update the ARM am79c961a driver			(Russell King)
> o	Fix parport_pc build with no PCI		(Russell King)
> o	Fix ARM memzero					(Russell King)
> o	Update ARM for __init and __setup		(Russell King)
> o	Update ARM to loops_per_jiffy			(Russell King)
> o	Remove arm ecard debug messages			(Russell King)
> o	Fix ARM makefiles				(Russell King)
> o	Fix iph5526 driver to use mdelay		(Arjan van de Ven)
> o	Fix epca, dtlk, aha152x loops_per_sec bits	(Philipp Rumpf)
> o	Fix smp tlb invalidate and bogomip printing	(Philipp Rumpf)
> o	Fix NLS warnings				(Arjan van de Ven)
> o	Fix wavfront conversion to loops_per_jiffies	(me)
> o	Fix an audio problem and a sanyo changer 	(Jens Axboe)
> 	problem
> o	Fix include bug with divert			(me)
> 	| Alternate fix to Willy Tarreau's
> o	Fix Alpha for loops_per_jiffy			(Willy Tarreau)
> 
> 2.2.18pre14
> o	Reorder attributes in drm to work with gcc272	(me)
> o	GNU cross compilers are foo-bar-gcc 		(Russell King)
> o	Add extra strange pcnet32 ident			(Willy Tarreau)
> o	Since no vendor can get which right.. use a	(Miquel van Smoorenburg)
> 	shell script instead
> 	| Please nobody tell me this fails in some bash version!
> o	Should be using bash not bash2 (escaped debug)	(Petri Kaukasoina)
> o	spin_unlock_irq wrong debug mode printk		(Willy Tarreau)
> o	Fix pcxx for the loops changes			(Arjan van de Ven)
> o	Fix ov511/via-rhine name clash			(Arjan van de Ven)
> o	Fix bridge compile with loops_per_sec change	(Mitch Adair)
> o	8139too driver added				(Jeff Garzik)
> 
> 2.2.18pre13
> o	Change udelay to use loops_per tick		(Philipp Rumpf)
> 	| Otherwise we bomb out at 2GHz which isnt far enough
> 	| away with 1.4/1.6GHz stuff due out RSN
> o	Fix drivers using big delays to use mdelay	(me)
> o	Fix drivers that used loops_per_sec		(Philipp Rumpf, me)
> o	Fix yamaha PCI sound SMP bug			(Arjan van de Ven)
> o	Change to preferred USB init fix		(David Rees)
> o	Fix rio fix					(Arjan van de Ven)
> o	Catch the VT but no mouse case in init/main.c	(Arjan van de Ven)
> o	Fix the 'which' compiler stuff			(Horst von Brand,
> 							 Peter Samuelson)
> 	| Can someone verify for me this works on Slackware and
> 	| on Caldera ?
> o	Add devfs include. Devfs wont be going into 2.2 (Richard Gooch)
> 	but this again makes it easier to do 2.2/2.4
> 	drivers.
> 
> 2.2.18pre12
> o	Fix cyrix MTRR handling bug 			(IIZUKA Daisuke)
> o	Fix ymfpci poll					(me, Arjan)
> o	Update radio-maestro, add Configure.help	(Adam Tla/lka>
> o	Fix rio/generic serial build bug		(Marcelo Tossati)
> o	USB build bug fix				(Arjan van de Ven)
> o	Fix missing ac97_codec.c return value		(Arjan van de Ven)
> o	Fix several warnings				(Arjan van de Ven)
> o	Made the PS/2 reconnect behaviour optional	(me)
> 	| Its now 'psaux-reconnect' on the boot line
> o	Allow for newer Hauppauge with 4 ports		(Krischan Jodies)
> o	Switch sound drivers from library to object	(Arjan van de Ven)
> o	Kill the not working ac97 lock on the 810	(me)
> o	Automatically select older compilers for kernel
> 	builds on Debian and RH				(Arjan van de Ven)
> o	Start volumes higher on ac97, teach the driver  (Rui Sousa)
> 	about 5bit and 6bit codec precision and use
> 	the mute bit.
> 
> 2.2.18pre11
> o	Kill bogus codec_id assignment			(Linus Torvalds)
> o	Update codec init code to handle id right	(me)
> o	Fix dead/clashing define for NFS		(Trond Myklebust)
> o	Remove the find_vga crap from bttv		(me)
> o	Fix return on probe failure for cadet		(Arjan van de Ven)
> o	Add missing configure.help stuff from 2.4test	(Alan Ford)
> o	Fix inia100/megaraid define clash		(Arjan van de Ven)
> o	__xchg marked as taking volatiles		(Arjan van de Ven)
> o	Fix vwsnd warning in sound core			(Arjan van de Ven)
> o	wdt_pci driver should return -EIO on error	(Arjan van de Ven)
> o	Fix init_adfs_fs warning			(Arjan van de Ven)
> o	Fix the joystick driver option parsing		(Arjan van de Ven)
> o	Update mkdep to handle // commenting		(Mike Klar)
> o	Thunderlan driver typo fixes			(Torben Mathiasen)
> o	Add KX133/KT133 stuff to the AGP/DRM 		(Jeff Nguyen)
> o	FIx multiple card bug in eepro driver		(Aristeu Filho)
> o	Initial YMF PCI native driver			(Pete Zaitcev)
> 	| Based on Jaroslav's ALSA driver and I've tweaked it
> 	| a bit and maybe broken it 8)
> o	Fix procfs unlink bugs				(Willy Tarreau)
> o	X.25 bugfix backport				(Henner Eisen)
> o	Fix incorrect free_dma on DMAless boxes		(Boria)
> o	Fix via audio driver merge			(Nick Lamb)
> o	Update plusb driver to 2.4 one			(Greg Kroah-Hartman)
> o	Put description info in wacom driver		(Greg Kroah-Hartman)
> o	Update both UHCI drivers to match 2.4test	(Greg Kroah-Hartman)
> o	Masquerade cleanup/warning fixes		(Horst von Brand)
> 
> 2.2.18pre10
> o	Add printk level to partition printk messages	(me)
> o	Fix bluesmoke address report/serialize		(Andrea Arcangeli)
> o	Add 2.4pre CPUID/MSR docs to 2.2.18pre		(Adrian Bunk)
> o	Update to the 2.4pre via audio driver		(Jeff Garzik)
> o	Fix small SMP race in set_current_state		(Andrea Arcangeli)
> o	Fix __KERNEL__ checks in sparc headers		(Dave Miller)
> o	Fix ADFS root directory bug added in pre9	(Russell King)
> o	Trap incorrect swap partition sizes		(Andries Brouwer)
> o	Fix nfsroot bootp/dhcp on sparc64		(Dave Miller)
> o	Tidy up tcp opt parsing				(Dave Miller)
> o	Check range on port range sysctl		(Dave Miller)
> o	Back out erroneous i2c.h change			(Arjan van de Ven)
> o	Fix trident hangs due to over zealous addition	(Eric Brombaugh)
> 	of midi support
> o	Fix big endian/macro bug in ext2fs		(Andi Kleen)
> o	Bring dabusb driver into line with 2.4		(Greg Kroah-Hartman)
> o	Bring event drivers into line with 2.4		(Franz Sirl,
> 							 Greg Kroah-Hartman)
> o	Fix usb help texts				(Greg Kroah-Hartman)
> o	Generic frame diverter				(Benoit Locher)
> o	Bring USB serial back into line with 2.4	(Greg Kroah-Hartman)
> o	Fix DVD driver rpc state bug			(Jens Axboe)
> o	Fix extra sunrpc printk				(Tim Mann)
> o	USB init tidy up				(Greg Kroah-Hartman)
> o	Allow PlanB video on generic PPC		(Michel Lanners)
> o	Doc fixes/trim cvs logs on isdn drivers		(Kai Germaschewski)
> o	USB hid, hub, ibmcam, dsbr100 devices updates	(Greg Kroah-Hartman)
> o	Return EAFNOSUPPORT for out of range families
> o	Fix SMP locking on floppy driver		(Jonathan Corbet)
> o	Add module author info to acm.c			(Greg Kroah-Hartman)
> o	Update CREDITS to reflect all the USB guys	(Greg Kroah-Hartman)
>  
> o	ipfw wrong allocation flag fix			(Rusty Russell)
> o	Implement Sun style lockf/nfs cache barriers	(Trond Myklebust)
> o	Updated ISI serial driver			(Multitech)
> 	| You may well need their newer firmware set/loader for the
> 	| later cards too
> 
> 2.2.18pre9
> o	Fix usb module load oops			(Thomas Sailer)
> o	Bring USB boot drivers in line with 2.4t8	(Greg Kroah-Hartman)
> o	And USB print drivers				(Greg Kroah-Hartman)
> o	And USB Rio driver				(Greg Kroah-Hartman)
> o	And USB dc2xx driver				(Greg Kroah-Hartman)
> o	And USB mdc800 driver				(Greg Kroah-Hartman)
> o	NFSv3 support and NFS updates			(Trond Myklebust and co)
> o	Compaq 64bit/66Mhz PCI Fibrechannel driver	(Amy Vanzant-Hodge)
> o	Disable microtouch driver (doesnt work in 2.2	(Greg Kroah-Hartman)
> 	currently)
> o	Update ADFS support				(Russell King)
> o	Update ARM arch specific code and includes	(Russell King)
> o	Update ARM specific drivers 			(Russell King)
> o	Use both fast and slow A20 gating on boot	(Kira Brown)
> 	| if your box doesnt boot I want to know about it...
> 	| Needed for stuff like the AMD Elan
> 
> 2.2.18pre8
> o	Fix mtrr compile bug				(Peter Blomgren)
> o	Alpha PCI boot up fix				(Michal Jaegermann)
> o	Fix vt/keyboard dependancy in USB config	(Arjan van de Ven)
> o	Fix sound hangs on cs4281			(Tom Woller)
> o	Fix Alpha vmlinuz.lds				(Andrea Arcangeli)
> o	Fix CDROMPLAYTRKIND bug, allow root to open	(Jens Axboe)
> 	the cd door whenver.
> o	Update ov511 to match 2.4			(Greg Kroah-Hartman)
> o	Further devio.c fix				(Greg Kroah-Hartman)
> o	Update NR_TASKS comment				(Jarkko Kovala)
> o	Further sparc64 ioctl translator fixes		(Andi Kleen)
> 
> 2.2.18pre7
> o	Fix the AGP compile in bug			(Arjan van de Ven)
> o	Revert old incorrect syncppp state change	(Ivan Passos)
> o	Fix i810 rng to actually get built in		(Arjan van de Ven)
> o	Megaraid compile fix, joystick, mkiss fixes	(Arjan van de Ven)
> o	Kawasaki USB ethernet depends on net		(Arjan van de Ven)
> o	Compaq cpqarray update				(Charles White)
> o	Fix usb problem with no USB unit found		(Oleg Drokin)
> o	Driver for the radio on some maestro cards	(Adam Tlalka)
> o	Additional shared map support needed for sparc64(Dave Miller)
> o	Fix wdt_pci when compiled in			(me, Arjan van de Ven)
> o	Fix usb missing symbol when non modular		(Arjan van de Ven)
> o	Identify chip and also handle MTRR for the 	(me)
> 	Cyrix III
> o	Allow binding to all ports multicast		(Andi Kleen)
> o	Bring USB docs up to date			(Greg Kroah-Hartman)
> o	Bring USB devio up to date			(Greg Kroah-Hartman)
> o	pci_resource_len null function for non PCI case	(Arjan van de Ven)
> o	Fix synchronous write off end of disk bug	(Jari Ruusu)
> 
> 2.2.18pre6
> o	Fix the IDE PCI not compiling bug		(Dag Wieers)
> o	Kill an escaped reference to vger.rutgers	(Dave Miller)
> o	Small rtl8139 fixups				(Jeff Garzik)
> o	Add USB bluetooth driver			(Greg Kroah-Hartman)
> o	Fix oops in visor driver			(Greg Kroah-Hartman)
> o	Remove some unneeded ext2 includes,fix a bug	(Andreas Dilger)
> 	in the UFS code
> o	Fix rtc race between timer and rtc irq		(Andrea Arcangeli)
> o	Fix slow gettimeofday SMP race			(Andrea Arcangeli)
> o	Check lost_ticks in settimeofday to be more	(Andrea Arcangeli)
> 	precise
> 
> 2.2.18pre5
> o	Added older VIA ide chipsets to the not to be	(me)
> 	autotuned list
> o	Fix crash on boot problem with __setup stuff	(me)
> o	Small acenic fix				(Matt Domsch)
> o	Fix hfc_pci isdn driver				(Jens David)
> o	Fix smbfs configuration problem			(Urban Widmark)
> o	Emu10K wrapper/build fixes			(Rui Sousa)
> o	Small cleanups					(Arjan van de Ven)
> o	Fix sparc32 build bug				(Horst von Brand)
> o	Fix quota oops					(Martin Diehl)
> o	Add i810 random number driver			(Jeff Garzik)
> o	Clear suid bits on ext2 truncate as per SuS	(Andi Kleen)
> o	Fix illegal use of section attributes		(Arjan van de Ven)
> o	Documentation for nmi watchdog			(Marcelo Tosatti)
> o	Fix uninitialised variable warnings		(Arjan van de Ven)
> o	Save DR6 condition into the TSS			(Ryan Wallach)
> o	Add additional __init's to the kernel	(Andrzej M. Krzysztofowicz)
> o	Backport 2.4 wdt_pci driver			(JP Nollman, me)
> o	AGP i810 fixes					(Chip Salzenberg)
> o	UDMA support for ALI1543 & 1543C IDE devices	(ALI)
> o	2.4 MSR/CPUID driver backport			(Dave Jones, 
> 								H Peter Anvin)
> o	Fix incorrect use of kernel v user ptr in NCPfs	(Petr Vandrovec)
> o	Updated scsi tape driver			(Kai Makisara)
> 
> 2.2.18pre4
> o	Remove the aacraid driver again, having looked	(me)
> 	at what is needed to make it acceptable and 
> 	debug it - Im dumping it back on Adaptec
> o	DAC960 update					(Leonard Zubkoff)
> o	Add setup vmlinuz.lds changes for Sparc		(Arjan van den Ven)
> o	Sparc updates for drm, ioctl and other		(Dave Miller)
> o	Megaraid driver update				(Peter Jarrett)
> o	Add cd volume 0 to the amp power off on the
> 	crystal cs46xx					(Bill Nottingham)
> o	Fix IPV6 fragment and kfree bugs		(Alexey Kuznetsov)
> o	Fix emu10k build bug				(me)
> o	Emu10K driver upgrade. Adds emu-aps support	(Rui Sousa)
> o	Updated IBM serveraid driver to 4.20		(IBM)
> o	Ext2 block handling cleanup from 2.4		(Al Viro)
> o	Make the ATI128 driver modular			(Marcelo Tosatti)
> o	Fix megaraid build bug with gcc 2.7.2		(Arjan van de Ven)
> o	Fix some of the dquot races			(Jan Kara)
> o	x86 setup code cleanup				(Dave Jones)
> o	Implement 2.4 compatible __setup and __initcall	(Arjan van de Ven)
> o	Tidy up smp_call_function stuff			(Keitaro Yosimura)
> o	Remove 2.4 compat glue from cs4281 driver	(Marcelo Tosatti)
> o	Fix minor bugs in bluesmoke now someone actually
> 	has a faulty CPU and logs			(me)
> o	Fix definition of IPV6_TLV_ROUTERALERT		(Dave Miller)
> o	Fix in6_addr, ip_decrease_ttl, other		(Dave Miller)
> 	minor bits
> o	cp932 fixes					(Kazuki Yasumatsu)
> o	Updated gdth driver				(Andreas Koepf)
> o	Acenic update					(Jes Sorensen)
> o	Update USB serial drivers			(Greg Kroah-Hartman)
> o	Move pci_resource_len into pci compat		(Marcelo Tosatti)
> 
> 2.2.18pre3  (versus 2.2.17pre20)
> o	Clean up most of the compatibility macros	(me)
> 	that various people use. I've systematically
> 	moved the 100% correct ones to the headers
> 	used in 2.4
> o	Fix newly introduced bug in kmem_cache_shrink	(Daniel Roesen)
> o	Further updates to symbios drivers		(Gerhard Roudier)
> o	Remove emu10K warning and mtrr warning		(Daniel Roesen)
> o	Fix symbol clash between cs4281 and esssolo1	(Arjan van de Ven)
> o	Fix acenic non modular/module build issues	(Arjan van de Ven)
> o	Fix bug in alpha csum_partial_copy that could	(Herbert Xu)
> 	cause spurious EFAULTs
> o	Yet another eepro100 variant sighted		(Torben Mathiasen)
> o	Minor microcode.c final tweak			(Daniel Roesen)
> o	Document that ATIFB is now modular		(Marcelo Tosatti)
> o	Parport update					(Tim Waugh)
> o	First set of ext2 updates/fixes			(Al Viro)
> o	Bring smbfs back into line with 2.2		(Urban Widmark)
> 	| This should make OS/2 work again
> o	Fix S/390 _stext (still doesnt build dasd)	(Kurt Roeckx)
> o	Remove unused vars in arch/i386/kernel/bios32.c	(Daniel Roesen)
> o	Update the DHCP initrd support			(Chip Salzenberg)
> o	Allow opening empty scsi removables like IDE
> 	with O_NONBLOCK (needed for some ioctls)	(Chip Salzenberg)
> o	Back out vibra mixer change
> o	Fix error returns in sbni driver		(Dawson Engler)
> o	Initial merge of the aacraid driver		(Adaptec)
> 	| Much deuglification left to be done here
> o	Report megaraid: on obscure megaraid error	(Daniel Deimert)
> 	strings
> o	Add another CS4299 id string			(Mulder Tjeerd)
> 
> 2.2.18pre2  (versus 2.2.17pre20)
> 
> o	Fix the compile problems with microcode.c	(Dave Jones, 
> 							 Daniel Roesen)
> o	GDTH driver update 				(Achim Leubner)
> o	Fix mathsemu miuse of casting with asm		(??)
> o	Make msnd_pinnacle driver build on Alpha
> o	Acenic 0.45 fixes				(Chip Salzenberg)
> o	Compaq CISS driver (SA 5300)			(Charles White, 
> 	+ cleanups					 me)
> 	+ gcc 2.95 fixup
> o	Modularise pm2fb and atyfb
> o	Upgrade AMI Megaraid driver to 1.09		(AMI)
> o	Add DEC HSG80 and COMPAQ 'logical volume' to
> 	scsi multilun list
> o	SK PCI FDDI driver support			(Schneider & Koch)
> o	Linux 2.2 USB backport				(Vojtech Pavlik)
> 	backport 3 + further fixes from the USB list
> 	+ mm/slab.c fix for cache destroy
> o	AGP driver backport				(XFree86, Precision
> 	DRM driver backport				 Insight, XiG, HJ Lu, 
> 							 VA Linux, 
> 							 and others)
> 
> 2.2.18pre1  (versus 2.2.17pre20)
> 
> o	Update symbios/ncr driver to 1.7.0/3.4.0	(Gerhard Roudier)
> o	Updated ATP870U driver				(ACard)
> o	Avoid running tq_scheduler stuff sometimes with	(Andrea Arcangeli)
> 	interrupts off
> o	Futher cpu setup updates			(me)
> o	IBM MCA scsi driver updates			(Michael Lang)
> o	Fix incorrect out of memory handling in bttv	(Dawson Engler)
> o	Fix incorrect out of memory handling in buz	(Dawson Engler)
> o	Fix incorrect out of memory handling in qpmouse	(Dawson Engler)
> o	Fix error handling memory leak in ipddp		(Dawson Engler)
> o	Fix error handling memory leak in sdla		(Dawson Engler)
> o	Fix error handling memory leak in softoss	(Dawson Engler)
> o	Fix error handling memory leak in ixj 		(Dawson Engler)
> o	Fix error handling memory leak in ax25		(Dawson Engler)
> o	Merge the microcode driver from 2.4 into 2.2	(Tigran Aivazian)
> o	Fix skbuff handling bug in the smc9194 driver	(Arnaldo Melo)
> o	Make vfat use the same generation rules as	(H. Kawaguchi,
> 	in windows 9x					 Chip Salzenberg)
> o	Fix oops in the CPQ array driver		(Arnaldo Melo)
> o	Fix ac97 codec not setting the id field		(Bill Nottingham)
> o	Further work on the cs46xx/CD power bits	(me)
> o	Synclink updates 				(Paul Fulgham)
> o	Synclink init bug fix				(Arnaldo Melo)
> o	Handle odd interrupts from toshiba floppies	(Alain Knaff)
> o	Fix trident driver build on nautilus Alpha	(Peter Petrakis)
> o	Add later sb16 imix support tot he sb driver	(Massimo Dal Zotto)
> o	Ignore luns that report can be connected, but	(Matt Domsch)
> 	not currently
> o	Fix dereference after kfree in uart401.c	(Dawson Engler)
> o	Return correct SuS error code for an unknown	(Herbert Xu)
> 	socket family
> o	Add sub window clipping to the bttv driver	(Thomas Jacob)
> o	Fix nfs cache locked messages			(Trond Myklebust)
> o	Fix the modutils misdocumentation		(Martin Douda)
> o	Remove bogus biosparm code from seagate.c	(Andries Brouwer)
> o	Return correct error code on failed fasync set	(Chip Salzenberg)
> o	Handle dcc resume with newer irc clients when	(Scottie Shore)
> 	doing an irq masq
> 
> --
> Alan Cox <alan@lxorguk.ukuu.org.uk>
> Red Hat Kernel Hacker
> & Linux 2.2 Maintainer                        Brainbench MVP for TCP/IP
> http://www.linux.org.uk/diary                 http://www.brainbench.com
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

  parent reply	other threads:[~2000-11-19  8:27 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2000-11-19  1:11 Linux 2.2.18pre22 Alan Cox
2000-11-19  1:56 ` Miquel van Smoorenburg
2000-11-19  2:51 ` J . A . Magallon
2000-11-19  8:53 ` Jeff V. Merkey [this message]
2000-11-19 12:57   ` Alan Cox
2000-11-20  5:45     ` Jeff V. Merkey
2000-11-19 15:09   ` Kai Germaschewski
2000-11-20  5:50     ` Jeff V. Merkey
2000-11-20 10:10       ` Kai Germaschewski
2000-11-20 17:29         ` Jeff V. Merkey
2000-11-19 10:07 ` Michael Marxmeier
2000-12-11  9:15   ` warning during make modules Corisen
2000-12-11  9:27     ` Keith Owens
2000-12-11 11:05       ` Corisen
2000-12-11 12:06         ` Keith Owens
2000-11-20 11:33 ` Linux 2.2.18pre22 Arnaud S . Launay
2000-11-21  7:36 ` Tomasz K³oczko
2000-11-21  9:32   ` David S. Miller
2000-11-22 13:48 ` John Kennedy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20001119015303.A25697@vger.timpanogas.org \
    --to=jmerkey@vger.timpanogas.org \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox