From: Borislav Deianov <borislav@ensim.com>
To: linux-kernel@vger.kernel.org
Cc: linux-scsi@vger.kernel.org, tytso@mit.edu
Subject: SCSI Oops (was test12-pre4)
Date: Mon, 4 Dec 2000 15:35:28 -0800 [thread overview]
Message-ID: <20001204153527.A5425@aero.ensim.com> (raw)
(cross-posted to linux-kernel and linux-scsi)
Hi,
The SCSI oops I reported last week is still present in test12-pre4.
This is on a Dell PowerEdge 6300. It has two Adaptec AIC-7890, one
Adaptec AIC-7860, and an AMI MegaRAID controller. There's nothing on
the 7890s, a CDROM and a tape drive on the 7890.
With all of the above enabled the kernel boots with no problems.
However, if I disable the two 7890s from the BIOS (to save 30 seconds
of boot time), I get an oops.
The decoded oops is below. Please email me directly for further
information.
Thanks,
Borislav
ksymoops 2.3.5 on i686 2.4.0-test12. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.0-test12/ (default)
-m linux-2.4.0-test12-pre4/System.map (specified)
activating NMI Watchdog ... done.
cpu: 0, clocks: 999937, slice: 199987
cpu: 1, clocks: 999937, slice: 199987
cpu: 2, clocks: 999937, slice: 199987
cpu: 3, clocks: 999937, slice: 199987
Unable to handle kernel NULL pointer dereference at virtual address 00000001
c019698f
*pde = 00000000
Oops: 0000
CPU: 1
EIP: 0010:[<c019698f>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010046
eax: f7dd0000 ebx: 000000ff ecx: 00000000 edx: 000000ff
esi: 00000000 edi: 00000000 ebp: 00000000 esp: c2139b80
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 1, stackpage=c2139000)
Stack: 00000000 f7dd0000 f7dd2878 f7dd2a34 00000028 ff000000 c01980c2 f7dd2878
f7dd0000 00000000 00000000 ffffffff 000000ff 00000000 f7dd2878 00000000
f7de3200 f7de3200 000000ff 001135d0 00000000 00000000 ff1aa8c3 c01aaec8
Call Trace: [<ff000000>] [<c01980c2>] [<ff1aa8c3>] [<c01aaec8>] [<c01ab143>] [<c01ab3d8>] [<c018b613>]
[<c018b6a2>] [<c019025c>] [<c0191adc>] [<c0190f9b>] [<c018b872>] [<c018b772>] [<c018b1d8>] [<c01946a1>]
[<c012f494>] [<c01200ff>] [<c016ea3d>] [<c021f3f4>] [<c016eaca>] [<c018b1cc>] [<c01944c6>] [<c0105000>]
[<c017512b>] [<c01218a4>] [<c0112156>] [<c011a9f1>] [<c0105000>] [<c018c647>] [<c0105000>] [<c014f1e4>]
[<c0105000>] [<c0105000>] [<c018cd1d>] [<c0107031>] [<c0105000>] [<c0109153>]
Code: 8a 57 01 88 d0 c0 e8 04 0f b6 d8 89 5c 24 10 88 d0 c0 e8 03
>>EIP; c019698f <aic7xxx_match_scb+1f/98> <=====
Trace; ff000000 <END_OF_CODE+6767307/????>
Trace; c01980c2 <aic7xxx_search_qinfifo+b2/3f4>
Trace; ff1aa8c3 <END_OF_CODE+6911bca/????>
Trace; c01aaec8 <aic7xxx_build_negotiation_cmnd+f4/20c>
Trace; c01ab143 <aic7xxx_buildscb+163/33c>
Trace; c01ab3d8 <aic7xxx_queue+bc/14c>
Trace; c018b613 <scsi_dispatch_cmd+9f/18c>
Trace; c018b6a2 <scsi_dispatch_cmd+12e/18c>
Trace; c019025c <scsi_old_done+0/5cc>
Trace; c0191adc <scsi_request_fn+370/39c>
Trace; c0190f9b <scsi_insert_special_req+77/8c>
Trace; c018b872 <scsi_do_req+c6/cc>
Trace; c018b772 <scsi_wait_req+72/ac>
Trace; c018b1d8 <scsi_wait_done+0/24>
Trace; c01946a1 <scan_scsis_single+e9/638>
Trace; c012f494 <__get_free_pages+14/24>
Trace; c01200ff <do_proc_doulongvec_minmax+10b/300>
Trace; c016ea3d <blk_init_free_list+19/64>
Trace; c021f3f4 <tvecs+13f38/15a44>
Trace; c016eaca <blk_init_queue+42/8c>
Trace; c018b1cc <scsi_initialize_queue+1c/28>
Trace; c01944c6 <scan_scsis+326/418>
Trace; c0105000 <empty_bad_page+0/1000>
Trace; c017512b <scrup+6b/108>
Trace; c01218a4 <update_process_times+20/94>
Trace; c0112156 <smp_apic_timer_interrupt+e6/f4>
Trace; c011a9f1 <printk+1a1/1b0>
Trace; c0105000 <empty_bad_page+0/1000>
Trace; c018c647 <scsi_register_host+1cf/2d8>
Trace; c0105000 <empty_bad_page+0/1000>
Trace; c014f1e4 <create_proc_entry+11c/12c>
Trace; c0105000 <empty_bad_page+0/1000>
Trace; c0105000 <empty_bad_page+0/1000>
Trace; c018cd1d <scsi_register_module+2d/5c>
Trace; c0107031 <init+31/1b0>
Trace; c0105000 <empty_bad_page+0/1000>
Trace; c0109153 <kernel_thread+23/30>
Code; c019698f <aic7xxx_match_scb+1f/98>
00000000 <_EIP>:
Code; c019698f <aic7xxx_match_scb+1f/98> <=====
0: 8a 57 01 mov 0x1(%edi),%dl <=====
Code; c0196992 <aic7xxx_match_scb+22/98>
3: 88 d0 mov %dl,%al
Code; c0196994 <aic7xxx_match_scb+24/98>
5: c0 e8 04 shr $0x4,%al
Code; c0196997 <aic7xxx_match_scb+27/98>
8: 0f b6 d8 movzbl %al,%ebx
Code; c019699a <aic7xxx_match_scb+2a/98>
b: 89 5c 24 10 mov %ebx,0x10(%esp,1)
Code; c019699e <aic7xxx_match_scb+2e/98>
f: 88 d0 mov %dl,%al
Code; c01969a0 <aic7xxx_match_scb+30/98>
11: c0 e8 03 shr $0x3,%al
Kernel panic: Attempted to kill init!
activating NMI Watchdog ... done.
cpu: 0, clocks: 999948, slice: 199989
cpu: 1, clocks: 999948, slice: 199989
cpu: 2, clocks: 999948, slice: 199989
cpu: 3, clocks: 999948, slice: 199989
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next reply other threads:[~2000-12-05 0:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-12-04 23:35 Borislav Deianov [this message]
2000-12-05 21:53 ` SCSI Oops (was test12-pre4) Torben Mathiasen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20001204153527.A5425@aero.ensim.com \
--to=borislav@ensim.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox