Re: Still "eth0: trigger_send() called with the transmitter busy" in 2.4.0-test12

["Gnea" <gnea@rochester.rr.com>]

On Tue, 12 Dec 2000 18:46:42 +0100, Juan blurted forth:

> Hi!
>  
>  This error exists since 2.4.0-test10preX or so. It occurs when the
>  network interface is activated.
>  
>  I'm using RedHat 7.0 and my ethernet card is a "Kingston EtheRx KNE20
>  Plug and Play ISA Adapter". I'm unable to access the Internet because
>  the ethernet card doesn't work :-(. Besides, the card uses two
>  interrupts (?) and there are two interfaces (eth0 y eth1) when I have
>  only one (?).
>  
[snip]
>   --- Next Part --- 
>  
>  Card 1 'KTC2000:Kingston EtheRx KNE20 Plug and Play ISA Adapter' PnP version 1.0 Product version 1.0
>    Logical device 0 'RTL8019:Unknown'
>      Supported registers 0x2
>      Compatible device PNP80d6
>      Device is active
>      Active port 0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff
>      Active IRQ 255 [0xff],255 [0xff]
>      Active DMA 255,255
>      Active memory 0xffffffff,0xffffffff,0xffffffff,0xffffffff
>      Resources 0
>        Priority preferred
>        Port 0x240-0x380, align 0x1f, size 0x20, 10-bit address decoding
>        IRQ 3,4,5,2/9,10,11,12,15 High-Edge

try loading the rtl81*.o module(s) until it works right... you should
see a message for eth1 in dmesg about it

-- 
	.oO gnea at rochester dot rr dot com Oo.
	    .oO url: http://garson.org/~gnea Oo.

"You can tune a filesystem, but you can't tuna fish" -unknown

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/