Sound (emu10k1) broken in 2.2.18

Sound (emu10k1) broken in 2.2.18

[Dima Brodsky]

Hi,

The sound (emu10k1) seems to be broken under 2.2.18.
If I do:

	cat x > /dev/dsp

I get:

	bash: /dev/dsp: No such device

But an ls -l shows:

crw-rw-rw-   1 root     sys       14,   3 Dec 15 21:25 dsp
crw-rw-rw-   1 root     sys       14,  19 Dec 15 21:25 dsp1

Same thing with xmms and mpg123.  There were no problems under 2.2.17.

Thanks
ttyl
Dima

-- 
Dima Brodsky                                   dima@cs.ubc.ca
                                               http://www.cs.ubc.ca/~dima
201-2366 Main Mall                             (604) 822-6179 (Office)
Department of Computer Science                 (604) 822-2895 (DSG Lab)
University of British Columbia, Canada         (604) 822-5485 (FAX)

Computers are like Old Testament gods; lots of rules and no mercy.
							  (Joseph Campbell)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

linux-2.0.4test12: nmap reboots kernel

[Meino Christian Cramer]

hi!

 Using nmapfe/nmap as root locks or reboots the kernel at once. No logs,
 nothing...

 Nmap version was nmap-2.54BETA16.tar.bz2

 If I can do more, please give me a hint...currently I dont know,
 what I can do without any log...

 Meino

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

Re: Sound (emu10k1) broken in 2.2.18

[kees]

Hi,

I have reported the same experience some days ago. I have a second machine
with a es1371 this also fails.

Kees

On Fri, 15 Dec 2000, Dima Brodsky wrote:

> Hi,
> 
> The sound (emu10k1) seems to be broken under 2.2.18.
> If I do:
> 
> 	cat x > /dev/dsp
> 
> I get:
> 
> 	bash: /dev/dsp: No such device
> 
> But an ls -l shows:
> 
> crw-rw-rw-   1 root     sys       14,   3 Dec 15 21:25 dsp
> crw-rw-rw-   1 root     sys       14,  19 Dec 15 21:25 dsp1
> 
> Same thing with xmms and mpg123.  There were no problems under 2.2.17.
> 
> Thanks
> ttyl
> Dima
> 
> -- 
> Dima Brodsky                                   dima@cs.ubc.ca
>                                                http://www.cs.ubc.ca/~dima
> 201-2366 Main Mall                             (604) 822-6179 (Office)
> Department of Computer Science                 (604) 822-2895 (DSG Lab)
> University of British Columbia, Canada         (604) 822-5485 (FAX)
> 
> Computers are like Old Testament gods; lots of rules and no mercy.
> 							  (Joseph Campbell)
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> Please read the FAQ at http://www.tux.org/lkml/
> 

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

Re: Sound (emu10k1) broken in 2.2.18

[Peter Samuelson]

[Dima Brodsky]
> 	cat x > /dev/dsp

> 	bash: /dev/dsp: No such device
> 
> But an ls -l shows:
> 
> crw-rw-rw-   1 root     sys       14,   3 Dec 15 21:25 dsp
> crw-rw-rw-   1 root     sys       14,  19 Dec 15 21:25 dsp1

'ls -l' is useless, here.  Sure the device files exist, but bash is
telling you that, kernel-side, they are not connected to anything.

- Do you have emu10k1 compiled in, or as a module?
- Does your SBLive appear to have been detected?  (Check 'dmesg')
- If emu10k1 is a module, is the module loaded?  Does it seem to detect
  your SBLive when loaded?  (Again check 'dmesg')

Peter
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

Re: Sound (emu10k1) broken in 2.2.18

[kees]

Hi Peter,

In _my_ case I compiled the EMU10K straight into the kernel.
dmesg shows it's found. The funny thing is that a second machine with an
es1371 board alos fails with 2.2.18.

2.2.17 is ok. Taking that .config and 'make oldconfig' produces a kernel
that doesnt allow the emu10k to work. (as for the es1371).

Kees


On Sat, 16 Dec 2000, Peter Samuelson wrote:

> 
> [Dima Brodsky]
> > 	cat x > /dev/dsp
> 
> > 	bash: /dev/dsp: No such device
> > 
> > But an ls -l shows:
> > 
> > crw-rw-rw-   1 root     sys       14,   3 Dec 15 21:25 dsp
> > crw-rw-rw-   1 root     sys       14,  19 Dec 15 21:25 dsp1
> 
> 'ls -l' is useless, here.  Sure the device files exist, but bash is
> telling you that, kernel-side, they are not connected to anything.
> 
> - Do you have emu10k1 compiled in, or as a module?
> - Does your SBLive appear to have been detected?  (Check 'dmesg')
> - If emu10k1 is a module, is the module loaded?  Does it seem to detect
>   your SBLive when loaded?  (Again check 'dmesg')
> 
> Peter
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> Please read the FAQ at http://www.tux.org/lkml/
> 

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

Re: Sound (emu10k1) broken in 2.2.18

[Simon Lodal]

> - Do you have emu10k1 compiled in, or as a module?
> - Does your SBLive appear to have been detected?  (Check 'dmesg')
> - If emu10k1 is a module, is the module loaded?  Does it seem to detect
>   your SBLive when loaded?  (Again check 'dmesg')

On my machine emu10k1 works as a module, but not at all when compiled
in. When I had it compiled in I didn't notice if the card was detected.
It surely worked as compiled in with 2.2.17, but not with 2.2.18.

Too, the bass and treble controls seem to have vanished in 2.2.18, they
do not show up in any mixer apps anymore.

Simon
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/