From: Vojtech Pavlik <vojtech@suse.cz>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Linus Torvalds <torvalds@transmeta.com>, linux-kernel@vger.kernel.org
Subject: Re: ide.2.4.1-p3.01112001.patch
Date: Sat, 13 Jan 2001 14:45:28 +0100 [thread overview]
Message-ID: <20010113144528.D1155@suse.cz> (raw)
In-Reply-To: <20010112212427.A2829@suse.cz> <E14HDv7-0005G6-00@the-village.bc.nu>
In-Reply-To: <E14HDv7-0005G6-00@the-village.bc.nu>; from alan@lxorguk.ukuu.org.uk on Fri, Jan 12, 2001 at 11:47:41PM +0000
On Fri, Jan 12, 2001 at 11:47:41PM +0000, Alan Cox wrote:
> > However - Alan's IDE patch for 2.2 kills autodma on ALL VIA chipsets.
> > That's because all VIA chipsets starting from vt82c586 to vt82c686b
> > (UDMA100), share the same PCI ID.
>
> I have no reports of problems with the later stuff
At least the one you sent to me is about 586b. Which is the later stuff.
> > Would you prefer to filter just vt82c586 and vt82c586a as the comment in
> > Alan's code says or simply unconditionally kill autodma on all of VIA
> > chipsets, as Alan's code does?
>
> I'd take a 2.2 patch to cut down the range too
I can make one for you, but first I'd like to find out what exactly are
the problem cases.
--
Vojtech Pavlik
SuSE Labs
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2001-01-13 14:05 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-01-12 8:44 ide.2.4.1-p3.01112001.patch Andre Hedrick
2001-01-12 8:55 ` ide.2.4.1-p3.01112001.patch Andre Hedrick
2001-01-12 17:51 ` ide.2.4.1-p3.01112001.patch Linus Torvalds
2001-01-12 18:13 ` ide.2.4.1-p3.01112001.patch Alan Cox
2001-01-12 18:37 ` ide.2.4.1-p3.01112001.patch Linus Torvalds
2001-01-12 21:26 ` ide.2.4.1-p3.01112001.patch Adrian Bunk
2001-01-12 18:17 ` ide.2.4.1-p3.01112001.patch Andre Hedrick
2001-01-12 18:55 ` ide.2.4.1-p3.01112001.patch Linus Torvalds
2001-01-12 19:46 ` ide.2.4.1-p3.01112001.patch Vojtech Pavlik
2001-01-12 19:57 ` ide.2.4.1-p3.01112001.patch Linus Torvalds
2001-01-12 20:24 ` ide.2.4.1-p3.01112001.patch Vojtech Pavlik
2001-01-12 23:47 ` ide.2.4.1-p3.01112001.patch Alan Cox
2001-01-13 13:45 ` Vojtech Pavlik [this message]
2001-01-13 17:09 ` ide.2.4.1-p3.01112001.patch Bryan O'Sullivan
2001-01-13 17:19 ` ide.2.4.1-p3.01112001.patch Vojtech Pavlik
2001-01-13 0:09 ` ide.2.4.1-p3.01112001.patch Linus Torvalds
2001-01-13 0:25 ` ide.2.4.1-p3.01112001.patch Alan Cox
2001-01-12 16:43 ` ide.2.4.1-p3.01112001.patch John Heil
2001-01-13 0:52 ` ide.2.4.1-p3.01112001.patch Linus Torvalds
2001-01-12 17:09 ` ide.2.4.1-p3.01112001.patch John Heil
2001-01-13 1:16 ` ide.2.4.1-p3.01112001.patch Linus Torvalds
2001-01-15 10:15 ` ide.2.4.1-p3.01112001.patch Matthias Andree
2001-01-13 1:12 ` ide.2.4.1-p3.01112001.patch Andre Hedrick
2001-01-13 1:18 ` ide.2.4.1-p3.01112001.patch Linus Torvalds
2001-01-13 1:24 ` ide.2.4.1-p3.01112001.patch Andre Hedrick
2001-01-13 1:31 ` ide.2.4.1-p3.01112001.patch Linus Torvalds
2001-01-13 1:48 ` ide.2.4.1-p3.01112001.patch Andre Hedrick
2001-01-13 1:51 ` ide.2.4.1-p3.01112001.patch Andre Hedrick
2001-01-13 14:02 ` ide.2.4.1-p3.01112001.patch Vojtech Pavlik
2001-01-13 14:00 ` ide.2.4.1-p3.01112001.patch Vojtech Pavlik
2001-01-13 19:46 ` ide.2.4.1-p3.01112001.patch Alan Cox
2001-01-13 20:00 ` ide.2.4.1-p3.01112001.patch Andre Hedrick
2001-01-14 3:41 ` ide.2.4.1-p3.01112001.patch TimO
2001-01-14 8:55 ` ide.2.4.1-p3.01112001.patch Vojtech Pavlik
2001-01-15 13:06 ` ide.2.4.1-p3.01112001.patch Stephen Clark
[not found] ` <Pine.LNX.4.30.0101130559060.19743-100000@wr5z.localdomain>
2001-01-13 14:22 ` VIA IDE corruption - anyone experiencing it with 2.4.0? Vojtech Pavlik
2001-01-12 23:43 ` ide.2.4.1-p3.01112001.patch Alan Cox
2001-01-13 2:43 ` ide.2.4.1-p3.01112001.patch davej
2001-01-13 13:42 ` ide.2.4.1-p3.01112001.patch Vojtech Pavlik
2001-01-13 3:03 ` ide.2.4.1-p3.01112001.patch Tkil
2001-01-13 13:44 ` ide.2.4.1-p3.01112001.patch Vojtech Pavlik
2001-01-13 13:35 ` ide.2.4.1-p3.01112001.patch Vojtech Pavlik
2001-01-14 19:38 ` ide.2.4.1-p3.01112001.patch Jamie Lokier
2001-01-14 22:39 ` ide.2.4.1-p3.01112001.patch Vojtech Pavlik
2001-01-15 0:06 ` ide.2.4.1-p3.01112001.patch Albert Cranford
2001-01-15 23:47 ` ide.2.4.1-p3.01112001.patch Henrique de Moraes Holschuh
2001-01-15 1:13 ` ide.2.4.1-p3.01112001.patch Jamie Lokier
2001-01-13 22:06 ` ide.2.4.1-p3.01112001.patch junio
2001-01-13 7:12 ` ide.2.4.1-p3.01112001.patch Andre Hedrick
2001-01-13 16:42 ` ide.2.4.1-p3.01112001.patch David Woodhouse
2001-01-13 17:04 ` ide.2.4.1-p3.01112001.patch Linus Torvalds
2001-01-14 17:22 ` ide.2.4.1-p3.01112001.patch David Woodhouse
2001-01-13 18:54 ` ide.2.4.1-p3.01112001.patch Russell King
2001-01-12 8:56 ` ide.2.4.1-p3.01112001.patch Craig Schlenter
-- strict thread matches above, loose matches on Subject: below --
2001-01-13 23:40 ide.2.4.1-p3.01112001.patch Andrzej Krzysztofowicz
2001-01-14 8:46 ` ide.2.4.1-p3.01112001.patch Vojtech Pavlik
2001-01-14 3:53 ide.2.4.1-p3.01112001.patch Tony Parsons
2001-01-14 8:31 ` ide.2.4.1-p3.01112001.patch David D.W. Downey
2001-01-14 9:03 ` ide.2.4.1-p3.01112001.patch David D.W. Downey
2001-01-15 10:29 ` ide.2.4.1-p3.01112001.patch Paul Flinders
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010113144528.D1155@suse.cz \
--to=vojtech@suse.cz \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@transmeta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox