From: "J . A . Magallon" <jamagallon@able.es>
To: Manfred Spraul <manfred@colorfullife.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Call for testers: ne2k-pci and io apic
Date: Sun, 14 Jan 2001 01:18:46 +0100 [thread overview]
Message-ID: <20010114011846.A11015@werewolf.able.es> (raw)
In-Reply-To: <200101131237.f0DCb8g15518@flint.arm.linux.org.uk> <3A6071C2.47E8418A@colorfullife.com>
In-Reply-To: <3A6071C2.47E8418A@colorfullife.com>; from manfred@colorfullife.com on Sat, Jan 13, 2001 at 16:18:26 +0100
On 2001.01.13 Manfred Spraul wrote:
>
> Any volunteers with ne2k-pci cards and other motherboards that include
> an io apic (e.g. all Intel motherboards that use an IO Controller Hub,
> Via Apollo Pro133, Pro133A, KX133)?
>
> Please:
> * apply the attached patch.
> * compile the kernel for SMP, or at least enable uniprocessor io apic
> support.
> * reboot..
> * flood ping the computer with 2 concurrent flood pings from a second
> computer.
> * wait one minute.
>
Volunteer. Mine is a Realtek 8029:
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
Subsystem: Realtek Semiconductor Co., Ltd. RT8029(AS)
Flags: medium devsel, IRQ 11
I/O ports at ef40 [size=32]
Board: SuperMicro P6DGU (440GX,PIIX4), 256Mb, 2xPII@400(Deschutes,512Kb).
The only problem is that I just have a cable connection. Is it enough
a 'loopback' connection (ie, ping myself) ? Does it goes at least until
the card and generates interrupts or stops at the kernel soft level ?
Anyways, if a 128K connection can generate enough flood for you, i'll send
you my results. I am going to test it anyways...
dmesg selected info:
I/O APIC #2 Version 17 at 0xFEC00000.
Int: type 3, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 00
Int: type 0, pol 0, trig 0, bus 2, IRQ 01, APIC ID 2, APIC INT 01
Int: type 0, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 02
Int: type 0, pol 0, trig 0, bus 2, IRQ 03, APIC ID 2, APIC INT 03
Int: type 0, pol 0, trig 0, bus 2, IRQ 04, APIC ID 2, APIC INT 04
Int: type 0, pol 0, trig 0, bus 2, IRQ 06, APIC ID 2, APIC INT 06
Int: type 0, pol 0, trig 0, bus 2, IRQ 07, APIC ID 2, APIC INT 07
Int: type 0, pol 1, trig 1, bus 2, IRQ 08, APIC ID 2, APIC INT 08
Int: type 0, pol 0, trig 0, bus 2, IRQ 09, APIC ID 2, APIC INT 09
Int: type 0, pol 0, trig 0, bus 2, IRQ 0c, APIC ID 2, APIC INT 0c
Int: type 0, pol 0, trig 0, bus 2, IRQ 0d, APIC ID 2, APIC INT 0d
Int: type 0, pol 0, trig 0, bus 2, IRQ 0e, APIC ID 2, APIC INT 0e
Int: type 0, pol 0, trig 0, bus 2, IRQ 0f, APIC ID 2, APIC INT 0f
Int: type 0, pol 3, trig 3, bus 2, IRQ 0a, APIC ID 2, APIC INT 10
Int: type 0, pol 3, trig 3, bus 2, IRQ 0b, APIC ID 2, APIC INT 11
Int: type 0, pol 3, trig 3, bus 2, IRQ 0b, APIC ID 2, APIC INT 12
Int: type 0, pol 3, trig 3, bus 2, IRQ 05, APIC ID 2, APIC INT 13
Int: type 2, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 17
Lint: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 00
Lint: type 1, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 01
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
..
ENABLING IO-APIC IRQs
..changing IO-APIC physical APIC ID to 2 ... ok.
Synchronizing Arb IDs.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-20, 2-21, 2-22, 2-23 not connected
.
.TIMER: vector=49 pin1=2 pin2=0
activating NMI Watchdog ... done.
testing NMI watchdog ... OK.
number of MP IRQ sources: 18.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
... register #00: 02000000
...... : physical APIC id: 02
... register #01: 00170011
...... : max redirection entries: 0017
...... : IO APIC version: 0011
... register #02: 00000000
...... : arbitration: 00
... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 003 03 0 0 0 0 0 1 1 51
07 003 03 0 0 0 0 0 1 1 59
08 003 03 0 0 0 0 0 1 1 61
09 003 03 0 0 0 0 0 1 1 69
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 003 03 0 0 0 0 0 1 1 71
0d 000 00 1 0 0 0 0 0 0 00
0e 003 03 0 0 0 0 0 1 1 79
0f 003 03 0 0 0 0 0 1 1 81
10 003 03 1 1 0 1 0 1 1 89
11 003 03 1 1 0 1 0 1 1 91
12 003 03 1 1 0 1 0 1 1 91
13 003 03 1 1 0 1 0 1 1 99
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ5 -> 19
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ10 -> 16
IRQ11 -> 17-> 18
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ15 -> 15
................................... done.
calibrating APIC timer ...
.... CPU clock speed is 400.9147 MHz.
.... host bus clock speed is 100.2284 MHz.
cpu: 0, clocks: 1002284, slice: 334094
CPU0<T0:1002272,T1:668176,D:2,S:334094,C:1002284>
cpu: 1, clocks: 1002284, slice: 334094
CPU1<T0:1002272,T1:334080,D:4,S:334094,C:1002284>
checking TSC synchronization across CPUs: passed.
Setting commenced=1, go go go
..
Board Vendor: Supermicro Inc..
Board Name: Intel 440BX/440GX.
--
J.A. Magallon $> cd pub
mailto:jamagallon@able.es $> more beer
Linux werewolf 2.4.0-ac8 #1 SMP Fri Jan 12 18:02:50 CET 2001 i686
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2001-01-14 0:19 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-01-12 17:16 QUESTION: Network hangs with BP6 and 2.4.x kernels, hardware related? Manfred Spraul
2001-01-12 17:33 ` Frank de Lange
2001-01-12 17:51 ` Manfred Spraul
2001-01-12 18:25 ` Frank de Lange
2001-01-12 19:04 ` Manfred Spraul
2001-01-12 19:07 ` Frank de Lange
2001-01-12 19:21 ` Frank de Lange
2001-01-12 19:33 ` Manfred Spraul
2001-01-12 19:52 ` Frank de Lange
2001-01-12 19:59 ` Linus Torvalds
2001-01-12 20:03 ` Ingo Molnar
2001-01-14 0:13 ` Roeland Th. Jansen
2001-01-14 0:23 ` Frank de Lange
2001-01-12 20:05 ` Frank de Lange
2001-01-12 20:11 ` QUESTION: Network hangs with BP6 and 2.4.x kernels, hardwarerelated? Manfred Spraul
2001-01-12 20:16 ` Frank de Lange
2001-01-12 20:19 ` Ingo Molnar
2001-01-12 20:26 ` Frank de Lange
2001-01-12 20:31 ` Ingo Molnar
2001-01-12 20:35 ` Frank de Lange
2001-01-12 20:37 ` Ingo Molnar
2001-01-12 20:46 ` David Woodhouse
2001-01-12 20:46 ` Frank de Lange
2001-01-12 20:51 ` Ingo Molnar
2001-01-12 21:05 ` Frank de Lange
2001-01-15 2:00 ` Jorge Nerin
2001-01-13 0:15 ` Linus Torvalds
2001-01-13 0:19 ` Frank de Lange
2001-01-13 0:29 ` Alan Cox
2001-01-12 20:54 ` Manfred Spraul
2001-01-12 21:07 ` Frank de Lange
2001-01-12 21:31 ` Manfred Spraul
2001-01-12 23:50 ` Alan Cox
2001-01-12 21:21 ` QUESTION: Network hangs with BP6 and 2.4.x kernels, hardware related? Frank de Lange
2001-01-12 23:35 ` QUESTION: Network hangs with BP6 and 2.4.x kernels, hardware Alan Cox
2001-01-13 0:06 ` Manfred Spraul
2001-01-13 0:36 ` Linus Torvalds
2001-01-13 0:48 ` Frank de Lange
2001-01-13 0:56 ` Linus Torvalds
2001-01-13 1:27 ` Frank de Lange
2001-01-13 1:51 ` Manfred Spraul
2001-01-13 2:11 ` Frank de Lange
2001-01-13 1:49 ` Jens Axboe
2001-01-13 2:12 ` Andrew Morton
2001-01-13 2:48 ` Linus Torvalds
2001-01-13 3:24 ` Andrew Morton
2001-01-13 12:37 ` Russell King
2001-01-13 15:18 ` Call for testers: ne2k-pci and io apic (was: Re: QUESTION: Network hangs with BP6...) Manfred Spraul
2001-01-13 23:55 ` Manfred Spraul
2001-01-14 0:18 ` J . A . Magallon [this message]
2001-01-14 0:23 ` J . A . Magallon
2001-01-14 2:14 ` Call for testers: ne2k-pci and io apic J . A . Magallon
2001-01-15 16:15 ` QUESTION: Network hangs with BP6 and 2.4.x kernels, hardware Zdenek Kabelac
2001-01-13 1:38 ` Manfred Spraul
2001-01-13 2:10 ` Andrew Morton
2001-01-12 17:49 ` Alan Cox
2001-01-12 18:08 ` Manfred Spraul
2001-01-12 18:16 ` Ingo Molnar
2001-01-12 18:45 ` Manfred Spraul
2001-01-12 18:48 ` Ingo Molnar
2001-01-12 18:28 ` Linus Torvalds
2001-01-12 23:27 ` Alan Cox
2001-01-13 0:35 ` Linus Torvalds
2001-01-13 0:43 ` Alan Cox
2001-01-13 0:48 ` Linus Torvalds
2001-01-12 19:05 ` Frank de Lange
2001-01-12 20:04 ` Linus Torvalds
2001-01-15 14:36 ` Roeland Th. Jansen
2001-01-12 22:03 ` Latest status of IDE patches from Andre Jeff Nguyen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010114011846.A11015@werewolf.able.es \
--to=jamagallon@able.es \
--cc=linux-kernel@vger.kernel.org \
--cc=manfred@colorfullife.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox