From: f5ibh <f5ibh@db0bm.ampr.org>
To: vandrove@vc.cvut.cz
Cc: linux-kernel@vger.kernel.org
Subject: Re: display problem with matroxfb
Date: Wed, 24 Jan 2001 00:19:14 +0100 [thread overview]
Message-ID: <200101232319.AAA08536@db0bm.ampr.org> (raw)
Hi Petr,
> Stop. Do you see right portion of screen in left, left portion in right,
> with black column in between, or is picture only shifted, without
> wraparound? I thought that you see wrapped display...
The display is shifted, WITH wraparound : the end of the line is at the
beginning of the following one ...
> Are you sure that it is source of problem? Default matroxfb settings
> for 640x480 is 'timmings 39721 48 16 33 10 96 2' - As horizontal position
No, I'm not sure ... so I've tested the parameters you mention :
timmings 39721 48 16 33 10 96 2
I copied the following block in /etc/fb.modes
mode "640x480-60"
# D: 25.200 MHz, H: 31.500 kHz, V: 59.999 Hz
geometry 640 480 640 480 8
timings 39683 48 16 33 10 96 2
accel true
rgba 8/0,8/0,8/0,0/0
endmode
With these parameters, the command 'fbset -match -a' is enough to reset the
display to normal operation. So, you was right.
> After boot look at /proc/cmdline. If it is cutted at column 64 (or 79),
> you have to upgrade your LILO. RedHat6.2 uses LILO with this dumb limitation.
I use Debian 2.2 and ... grub. But I've tested with lilo too. With the sae
results. The cmdline is not truncated.
> Also, you do not have to specify vesa,pixclock,hslen and vslen, as you leave
> them on defaults. So 'video=matrox:left:50,right:10,upper:32,lower:11'
> should work... But I think that only 'right:' really matters.
This does not work ... I've to use the fbset command to reset the display to
normal operation after login in (or in an automatic command at boot time in
/et/init.d). This works, but I've lost the logo ;-)
--
Regards
Jean-Luc
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next reply other threads:[~2001-01-23 23:19 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-01-23 23:19 f5ibh [this message]
-- strict thread matches above, loose matches on Subject: below --
2001-01-29 0:57 display problem with matroxfb Trevor Hemsley
[not found] <20010129011553.A1085@ppc.vc.cvut.cz>
2001-01-29 0:28 ` Petr Vandrovec
2001-01-24 23:14 Trevor Hemsley
2001-01-24 22:17 f5ibh
2001-01-24 22:59 ` Rafael E. Herrera
2001-01-24 19:42 Petr Vandrovec
2001-01-24 9:32 f5ibh
2001-01-24 1:17 Petr Vandrovec
2001-01-23 22:54 Petr Vandrovec
2001-01-23 20:34 f5ibh
2001-01-22 22:16 Petr Vandrovec
2001-01-22 21:11 f5ibh
2001-01-21 14:48 f5ibh
2001-01-22 0:18 ` Petr Vandrovec
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200101232319.AAA08536@db0bm.ampr.org \
--to=f5ibh@db0bm.ampr.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vandrove@vc.cvut.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox