pre 10

pre 10

[newsreader]

I have successfully compiled and used 2.4.0 on pentium 133
system.  However because I wanted to try reiserfs I installed
2.4.1-pre10.  ppp is now broken.  I get the following error

-------------

Jan 23 21:24:55 a pppd[505]: Serial connection established.
Jan 23 21:24:55 a pppd[505]: ioctl(PPPIOCGFLAGS): Invalid argument
Jan 23 21:24:56 a pppd[505]: Hangup (SIGHUP)
Jan 23 21:24:56 a pppd[505]: Exit.

-----------

I hope it's not my fault?  I did not have any problem with
2.4.0 kernel.


---------------

Next I also have a dell box running celeron 566 with intel i810. 
I run 2.2.18 and managed to make my display adapter work
with a couple of packages from intel site.  I would like
to run 2.4.  First 2.4.0 compiles and boots on this
machine fine.  But I could not startx.  I gave up at that
point but I wanted reiserfs so I again tried with pre10.  pre10
kernel won't even boot.  It says that I must supply "root="
parameter

That can't be right.  First I compile and install on the
same machine.  Next my root is /dev/hda1.  

Next I did 

/usr/sbin/rdev bzImage /dev/hda1

That did not work.

Next I install lilo with proper root parameter.

That did not work.

I hope someone can find and fix these problems.

Regards




-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

Re: pre 10

[hugang]

On Tue, 23 Jan 2001 22:01:41 -0500
newsreader@mediaone.net wrote:

upgrade the ppp to 2.4.0. 

>I have successfully compiled and used 2.4.0 on pentium 133
>system.  However because I wanted to try reiserfs I installed
>2.4.1-pre10.  ppp is now broken.  I get the following error
>
>-------------
>
>Jan 23 21:24:55 a pppd[505]: Serial connection established.
>Jan 23 21:24:55 a pppd[505]: ioctl(PPPIOCGFLAGS): Invalid argument
>Jan 23 21:24:56 a pppd[505]: Hangup (SIGHUP)
>Jan 23 21:24:56 a pppd[505]: Exit.
>
>-----------
>
>I hope it's not my fault?  I did not have any problem with
>2.4.0 kernel.
>
>
>---------------
>
>Next I also have a dell box running celeron 566 with intel i810. 
>I run 2.2.18 and managed to make my display adapter work
>with a couple of packages from intel site.  I would like
>to run 2.4.  First 2.4.0 compiles and boots on this
>machine fine.  But I could not startx.  I gave up at that
>point but I wanted reiserfs so I again tried with pre10.  pre10
>kernel won't even boot.  It says that I must supply "root="
>parameter
>
>That can't be right.  First I compile and install on the
>same machine.  Next my root is /dev/hda1.  
>
>Next I did 
>
>/usr/sbin/rdev bzImage /dev/hda1
>
>That did not work.
>
>Next I install lilo with proper root parameter.
>
>That did not work.
>
>I hope someone can find and fix these problems.
>
>Regards
>
>
>
>
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/