From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sun, 28 Jan 2001 15:58:44 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sun, 28 Jan 2001 15:58:35 -0500 Received: from mailgate.rz.uni-karlsruhe.de ([129.13.64.97]:19206 "EHLO mailgate.rz.uni-karlsruhe.de") by vger.kernel.org with ESMTP id ; Sun, 28 Jan 2001 15:58:23 -0500 To: Martin Mares Cc: linux-kernel@vger.kernel.org Subject: PCI IRQ routing problem in 2.4.0 From: Robert Siemer X-Mailer: Mew version 1.94b25 on Emacs 20.5 / Mule 4.0 (HANANOEN) Reply-To: Robert Siemer Mime-Version: 1.0 Content-Type: Multipart/Mixed; boundary="--Next_Part(Sun_Jan_28_21:58:04_2001_809)--" Content-Transfer-Encoding: 7bit Message-Id: <20010128215812H.siemer@panorama.hadiko.de> Date: Sun, 28 Jan 2001 21:58:12 +0100 X-Dispatcher: imput version 990425(IM115) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org ----Next_Part(Sun_Jan_28_21:58:04_2001_809)-- Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi Martin! While moving from 2.4.0-test9 to 2.4.0 I got the following problem: Linux thinks my usb controller is on IRQ 12 instead of IRQ 9. The 'BIOS box' (on boot) still states that usb is on IRQ 9. Under test9 pci-irq-behaviour was okay for me, but with 2.4.0 I cant load the usb-modules (the kernel panics and reboots). I attached the kernel output (with #define DEBUG) and 'lspci -vvx'. I hope you can help me; otherwise I need a good pointer to pci configuration specs... Thanks, Robert ----Next_Part(Sun_Jan_28_21:58:04_2001_809)-- Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="lspci-vvx.2.4.0" 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 5597 [SiS5582] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at d000 [size=16] 00: 39 10 13 55 01 00 00 00 d0 8a 01 01 00 20 80 00 10: 01 e4 00 00 01 e0 00 00 01 d8 00 00 01 d4 00 00 20: 01 d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 0c 01 00 00 00:01.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 10) (prog-if 10 [OHCI]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- [disabled] [size=64K] 00: 33 53 f0 88 83 00 00 02 00 00 00 03 00 00 00 00 10: 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 0e 01 00 00 00:0c.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c875 (rev 03) Subsystem: Tekram Technology Co.,Ltd. DC390F Ultra Wide SCSI Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- [disabled] [size=64K] 00: 00 10 0f 00 57 00 00 02 03 00 00 01 08 20 00 00 10: 01 b4 00 00 00 00 80 e1 00 00 00 e1 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 e1 1d 04 39 30: 00 00 00 00 00 00 00 00 00 00 00 00 0c 01 11 40 00:13.0 VGA compatible controller: Silicon Integrated Systems [SiS] 5597/5598 VGA (rev 65) (prog-if 00 [VGA]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at d000 [size=16] 00: 39 10 13 55 01 00 00 00 d0 8f 01 01 00 20 80 00 10: 01 e4 00 00 01 e0 00 00 01 d8 00 00 01 d4 00 00 20: 01 d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 0c 01 00 00 00:01.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 10) (prog-if 10 [OHCI]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- [disabled] [size=64K] 00: 33 53 f0 88 83 00 00 02 00 00 00 03 00 00 00 00 10: 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 0e 01 00 00 00:0c.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c875 (rev 03) Subsystem: Tekram Technology Co.,Ltd. DC390F Ultra Wide SCSI Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- [disabled] [size=64K] 00: 00 10 0f 00 57 00 00 02 03 00 00 01 08 20 00 00 10: 01 b4 00 00 00 00 80 e1 00 00 00 e1 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 e1 1d 04 39 30: 00 00 00 00 00 00 00 00 00 00 00 00 0c 01 11 40 00:13.0 VGA compatible controller: Silicon Integrated Systems [SiS] 5597/5598 VGA (rev 65) (prog-if 00 [VGA]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- : tagged command queue depth set to 8 sym53c875-0-<8,0>: tagged command queue depth set to 8 sym53c875-0-<9,0>: tagged command queue depth set to 8 Detected scsi tape st0 at scsi0, channel 0, id 10, lun 0 st: bufsize 32768, wrt 30720, max init. buffers 4, s/g segs 16. Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0 Detected scsi disk sdc at scsi0, channel 0, id 8, lun 0 Detected scsi disk sdd at scsi0, channel 0, id 9, lun 0 sym53c875-0-<0,0>: sync msgout: 1-3-1-c-10. sym53c875-0-<0,0>: sync msg in: 1-3-1-19-8. sym53c875-0-<0,0>: sync: per=25 scntl3=0x30 scntl4=0x0 ofs=8 fak=0 chg=0. sym53c875-0-<0,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8) sym53c875-0-<0,0>: sync msgout: 1-3-1-c-10. sym53c875-0-<0,0>: sync msg in: 1-3-1-19-8. sym53c875-0-<0,0>: sync: per=25 scntl3=0x30 scntl4=0x0 ofs=8 fak=0 chg=0. SCSI device sda: 2503872 512-byte hdwr sectors (1282 MB) Partition check: /dev/scsi/host0/bus0/target0/lun0: p1 p2 sym53c875-0-<1,0>: sync msgout: 1-3-1-c-10. sym53c875-0-<1,0>: sync msg in: 1-3-1-19-f. sym53c875-0-<1,0>: sync: per=25 scntl3=0x30 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875-0-<1,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 15) sym53c875-0-<1,0>: sync msgout: 1-3-1-c-10. sym53c875-0-<1,0>: sync msg in: 1-3-1-19-f. sym53c875-0-<1,0>: sync: per=25 scntl3=0x30 scntl4=0x0 ofs=15 fak=0 chg=0. SCSI device sdb: 2110812 512-byte hdwr sectors (1081 MB) /dev/scsi/host0/bus0/target1/lun0: p1 p2 sym53c875-0-<8,0>: wide msgout: 1-2-3-1. sym53c875-0-<8,0>: wide msgin: 1-2-3-1. sym53c875-0-<8,0>: wide: wide=1 chg=0. sym53c875-0-<8,0>: wide msgout: 1-2-3-1. sym53c875-0-<8,0>: wide msgin: 1-2-3-1. sym53c875-0-<8,0>: wide: wide=1 chg=0. sym53c875-0-<8,0>: sync msgout: 1-3-1-c-10. sym53c875-0-<8,0>: sync msg in: 1-3-1-c-f. sym53c875-0-<8,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875-0-<8,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15) SCSI device sdc: 17783240 512-byte hdwr sectors (9105 MB) /dev/scsi/host0/bus0/target8/lun0: p1 sym53c875-0-<9,0>: wide msgout: 1-2-3-1. sym53c875-0-<9,0>: wide msgin: 1-2-3-1. sym53c875-0-<9,0>: wide: wide=1 chg=0. sym53c875-0-<9,0>: wide msgout: 1-2-3-1. sym53c875-0-<9,0>: wide msgin: 1-2-3-1. sym53c875-0-<9,0>: wide: wide=1 chg=0. sym53c875-0-<9,0>: sync msgout: 1-3-1-c-10. sym53c875-0-<9,0>: sync msg in: 1-3-1-c-f. sym53c875-0-<9,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875-0-<9,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15) SCSI device sdd: 17783240 512-byte hdwr sectors (9105 MB) /dev/scsi/host0/bus0/target9/lun0: p1 at 0x344 aci: READYFLAG needed 785911 polls. aci: READYFLAG needed 835044 polls. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 8192 bind 8192) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 VFS: Mounted root (ext2 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 188k freed Adding Swap: 132072k swap-space (priority -1) RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Linux video capture interface: v1.00 i2c-core.o: i2c core module i2c-algo-bit.o: i2c bit algorithm module bttv: driver version 0.7.50 loaded bttv: using 2 buffers with 2080k (4160k total) for capture BT848 and your chipset may not work together. bttv: Bt8xx card found (0). IRQ for 00:09.0:0 -> PIRQ 04, mask 1eb8, excl 0000 -> newirq=11 -> got IRQ 7 IRQ routing conflict in pirq table! Try 'pci=autoirq' bttv0: Bt878 (rev 2) at 00:09.0, irq: 11, latency: 32, memory: 0xe7800000 bttv0: subsystem: 0070:13eb => Hauppauge WinTV => card=10 bttv0: model: BT878(Hauppauge new (bt878)) [autodetected] bttv0: Hauppauge msp34xx: reset line init i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: Hauppauge eeprom: model=37284, tuner=Philips FM1216 (5) bttv0: i2c: checking for MSP34xx @ 0x80... found i2c-core.o: driver i2c msp3400 driver registered. msp34xx: init: chip=MSP3410D-B4, has NICAM support msp3410: daemon started bttv0: i2c attach [MSP3410D-B4] i2c-core.o: client [MSP3410D-B4] registered to adapter [bt848 #0](pos. 0). bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) i2c-core.o: driver generic i2c audio driver registered. bttv0: i2c attach [tda9840] i2c-core.o: client [tda9840] registered to adapter [bt848 #0](pos. 1). i2c-core.o: driver i2c TV tuner driver registered. tuner: chip found @ 0x61 bttv0: i2c attach [Philips PAL] i2c-core.o: client [Philips PAL] registered to adapter [bt848 #0](pos. 2). inserting floppy driver for 2.4.0 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0 Detected scsi CD-ROM sr1 at scsi0, channel 0, id 5, lun 0 sym53c875-0-<4,0>: sync msgout: 1-3-1-c-10. sym53c875-0-<4,0>: sync msg in: 1-3-1-c-f. sym53c875-0-<4,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875-0-<4,*>: FAST-20 SCSI 20.0 MB/s (50 ns, offset 15) sym53c875-0-<4,0>: sync msgout: 1-3-1-c-10. sym53c875-0-<4,0>: sync msg in: 1-3-1-c-f. sym53c875-0-<4,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875-0-<4,0>: sync msgout: 1-3-1-c-10. sym53c875-0-<4,0>: sync msg in: 1-3-1-c-f. sym53c875-0-<4,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. Uniform CD-ROM driver Revision: 3.12 sym53c875-0-<5,*>: target did not report SYNC. sym53c875-0-<5,*>: target did not report SYNC. Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller on PCI bus 00 dev 09 PCI: Enabling device 00:01.1 (0000 -> 0001) IRQ for 00:01.1:0 -> PIRQ 01, mask 1eb8, excl 0000 -> newirq=12 -> assigning IRQ 12 ... OK PCI: Assigned IRQ 12 for device 00:01.1 PCI: The same IRQ used for device 00:01.2 PCI: The same IRQ used for device 00:0c.0 SIS5513: chipset revision 208 SIS5513: not 100% native mode: will probe irqs later SIS5513: neither IDE port enabled (BIOS) ----Next_Part(Sun_Jan_28_21:58:04_2001_809)-- Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg.2.4.0-test9" Linux version 2.4.0-test9 (root@panorama.hadiko.de) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Mon Oct 16 16:28:46 CEST 2000 BIOS-provided physical RAM map: BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable) BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved) BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved) BIOS-e820: 0000000007f00000 @ 0000000000100000 (usable) BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved) Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. Scan SMP from c009fc00 for 4096 bytes. On node 0 totalpages: 32768 zone(0): 4096 pages. zone(1): 28672 pages. zone(2): 0 pages. mapped APIC to ffffe000 (01223000) Kernel command line: BOOT_IMAGE=old ro root=801 Initializing CPU#0 Detected 334.089 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 666.83 BogoMIPS Memory: 126952k/131072k available (1093k kernel code, 3732k reserved, 64k data, 188k init, 0k highmem) Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) VFS: Diskquotas version dquot_6.4.0 initialized CPU: L1 I Cache: 32K L1 D Cache: 32K (32 bytes/line) CPU: AMD-K6(tm) 3D processor stepping 00 Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX PCI: PCI BIOS revision 2.10 entry at 0xf04d0, last bus=0 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router default [1039/0008] at 00:01.0 Disabling direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 8192 bind 8192) Linux IP multicast router 0.06 plus PIM-SM Initializing RT netlink socket Starting kswapd v1.8 0x378: FIFO is 16 bytes 0x378: writeIntrThreshold is 16 0x378: readIntrThreshold is 16 0x378: PWord is 8 bits 0x378: Interrupts are ISA-Pulses 0x378: ECP port cfgA=0x10 cfgB=0x4b 0x378: ECP settings irq=7 dma=3 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,EPP,ECP] parport0: irq 7 detected parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: No more nibble data (0 bytes) parport1: PC-style at 0x278 [PCSPP] parport1: cpp_daisy: aa5500ff(38) parport1: assign_addrs: aa5500ff(38) parport1: cpp_daisy: aa5500ff(38) parport1: assign_addrs: aa5500ff(38) pty: 256 Unix98 ptys configured lp0: using parport0 (polling). lp1: using parport1 (polling). SCSI subsystem driver Revision: 1.00 sym53c8xx: at PCI bus 0, device 12, function 0 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c875 detected with Tekram NVRAM sym53c875-0: rev 0x3 on pci bus 0 device 12 function 0 irq 12 sym53c875-0: Tekram format NVRAM, ID 7, Fast-20, Parity Checking sym53c875-0: on-chip RAM at 0xe1000000 sym53c875-0: restart (scsi reset). sym53c875-0: Downloading SCSI SCRIPTS. scsi0 : sym53c8xx - version 1.6b Vendor: IBM Model: FIREBALL1280S !# Rev: 630P Type: Direct-Access ANSI SCSI revision: 02 Vendor: CONNER Model: CFP1080S Rev: 4649 Type: Direct-Access ANSI SCSI revision: 02 Vendor: PLEXTOR Model: CD-ROM PX-40TS Rev: 1.11 Type: CD-ROM ANSI SCSI revision: 02 Vendor: COMPAQ Model: CD-ROM CR-503BCQ Rev: 1.1c Type: CD-ROM ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST39140W Rev: 1281 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST39140W Rev: 1281 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SONY Model: SDT-10000 Rev: 0101 Type: Sequential-Access ANSI SCSI revision: 02 sym53c875-0-<1,0>: tagged command queue depth set to 8 sym53c875-0-<8,0>: tagged command queue depth set to 8 sym53c875-0-<9,0>: tagged command queue depth set to 8 Detected scsi tape st0 at scsi0, channel 0, id 10, lun 0 st: bufsize 32768, wrt 30720, max init. buffers 4, s/g segs 16. Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0 Detected scsi disk sdc at scsi0, channel 0, id 8, lun 0 Detected scsi disk sdd at scsi0, channel 0, id 9, lun 0 sym53c875-0-<0,0>: sync msgout: 1-3-1-c-10. sym53c875-0-<0,0>: sync msg in: 1-3-1-19-8. sym53c875-0-<0,0>: sync: per=25 scntl3=0x30 scntl4=0x0 ofs=8 fak=0 chg=0. sym53c875-0-<0,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8) sym53c875-0-<0,0>: sync msgout: 1-3-1-c-10. sym53c875-0-<0,0>: sync msg in: 1-3-1-19-8. sym53c875-0-<0,0>: sync: per=25 scntl3=0x30 scntl4=0x0 ofs=8 fak=0 chg=0. SCSI device sda: 2503872 512-byte hdwr sectors (1282 MB) Partition check: /dev/scsi/host0/bus0/target0/lun0: p1 p2 sym53c875-0-<1,0>: sync msgout: 1-3-1-c-10. sym53c875-0-<1,0>: sync msg in: 1-3-1-19-f. sym53c875-0-<1,0>: sync: per=25 scntl3=0x30 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875-0-<1,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 15) sym53c875-0-<1,0>: sync msgout: 1-3-1-c-10. sym53c875-0-<1,0>: sync msg in: 1-3-1-19-f. sym53c875-0-<1,0>: sync: per=25 scntl3=0x30 scntl4=0x0 ofs=15 fak=0 chg=0. SCSI device sdb: 2110812 512-byte hdwr sectors (1081 MB) /dev/scsi/host0/bus0/target1/lun0: p1 p2 sym53c875-0-<8,0>: wide msgout: 1-2-3-1. sym53c875-0-<8,0>: wide msgin: 1-2-3-1. sym53c875-0-<8,0>: wide: wide=1 chg=0. sym53c875-0-<8,0>: wide msgout: 1-2-3-1. sym53c875-0-<8,0>: wide msgin: 1-2-3-1. sym53c875-0-<8,0>: wide: wide=1 chg=0. sym53c875-0-<8,0>: sync msgout: 1-3-1-c-10. sym53c875-0-<8,0>: sync msg in: 1-3-1-c-f. sym53c875-0-<8,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875-0-<8,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15) SCSI device sdc: 17783240 512-byte hdwr sectors (9105 MB) /dev/scsi/host0/bus0/target8/lun0: p1 sym53c875-0-<9,0>: wide msgout: 1-2-3-1. sym53c875-0-<9,0>: wide msgin: 1-2-3-1. sym53c875-0-<9,0>: wide: wide=1 chg=0. sym53c875-0-<9,0>: wide msgout: 1-2-3-1. sym53c875-0-<9,0>: wide msgin: 1-2-3-1. sym53c875-0-<9,0>: wide: wide=1 chg=0. sym53c875-0-<9,0>: sync msgout: 1-3-1-c-10. sym53c875-0-<9,0>: sync msg in: 1-3-1-c-f. sym53c875-0-<9,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875-0-<9,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15) SCSI device sdd: 17783240 512-byte hdwr sectors (9105 MB) /dev/scsi/host0/bus0/target9/lun0: p1 devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 VFS: Mounted root (ext2 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 188k freed Adding Swap: 132072k swap-space (priority -1) RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Linux video capture interface: v1.00 i2c-core.o: i2c core module i2c-algo-bit.o: i2c bit algorithm module bttv: driver version 0.7.38 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Bt8xx card found (0). bttv0: Brooktree Bt878 (rev 2) bus: 0, devfn: 72, irq: 11, memory: 0xe7800000. i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: i2c: checking for eeprom @ 0xa0... found bttv0: card id: Hauppauge WinTV (0x13eb0070) => card=10 bttv0: model: BT878(Hauppauge new (bt878)) [autodetected] bttv0: Hauppauge eeprom: tuner=Philips FM1216 (5) bttv0: Hauppauge msp34xx: reset line init bttv0: i2c: checking for MSP34xx @ 0x80... found i2c-core.o: adapter unregistered: bt848 #0 i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: i2c: checking for MSP34xx @ 0x80... found i2c-core.o: driver i2c msp3400 driver registered. msp3400: init: chip=MSP3410D-B4, has NICAM support msp3410: daemon started bttv0: i2c attach [MSP3410D-B4] i2c-core.o: client [MSP3410D-B4] registered to adapter [bt848 #0](pos. 0). bttv0: i2c: checking for TDA8425 @ 0x82... not found bttv0: i2c: checking for TDA985x @ 0xb6... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found i2c-core.o: driver i2c TV tuner driver registered. tuner: chip found @ 0x61 bttv0: i2c attach [Philips PAL] i2c-core.o: client [Philips PAL] registered to adapter [bt848 #0](pos. 1). inserting floppy driver for 2.4.0-test9 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0 Detected scsi CD-ROM sr1 at scsi0, channel 0, id 5, lun 0 sym53c875-0-<4,0>: sync msgout: 1-3-1-c-10. sym53c875-0-<4,0>: sync msg in: 1-3-1-c-f. sym53c875-0-<4,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875-0-<4,*>: FAST-20 SCSI 20.0 MB/s (50 ns, offset 15) sym53c875-0-<4,0>: sync msgout: 1-3-1-c-10. sym53c875-0-<4,0>: sync msg in: 1-3-1-c-f. sym53c875-0-<4,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875-0-<4,0>: sync msgout: 1-3-1-c-10. sym53c875-0-<4,0>: sync msg in: 1-3-1-c-f. sym53c875-0-<4,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. Uniform CD-ROM driver Revision: 3.11 sym53c875-0-<5,*>: target did not report SYNC. sym53c875-0-<5,*>: target did not report SYNC. Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller on PCI bus 00 dev 09 SIS5513: placing both ports into native PCI mode SIS5513: device enabled (Linux) SIS5513: chipset revision 208 SIS5513: will probe irqs later SIS5513: neither IDE port enabled (BIOS) ----Next_Part(Sun_Jan_28_21:58:04_2001_809)---- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/