possible bug with adaptec aic-7896 and 2.4.x

[Andrew Prins <next@linux.com>]

in 2.4.0 and 2.4.1 on a pentium 3 with an onboard adaptec AIC-7896, i 
receive the following after it is detected:

scsi: aborting command due to timeout: pid 0, scsi0, channel 0, id 0
lun 0 Inquiry 00 00 00 ff 00

i get the error twice, then the box hangs. this occurs on both a single 
processor box and a dual processor box with a kernel without SMP support. 
on a dual processor box when SMP is compiled in, i receive a similar error:

scsi: aborting command due to timeout: pid 0, scsi0, channel 0, id 1 
lun 1 Inquiry 20 00 00 ff 00

but the box continues to boot fine.

the same hardware configuration in 2.2.15 works fine, and a similar hardware
configuration using a AIC-7895 instead of a AIC-7896 running 2.4.x works
fine.

any ideas?

thanks,

a

-- 
andrew prins (linux & diet coke advocate)
finger next@keys.boca.verio.net for pgp key.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/