From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Wed, 31 Jan 2001 03:14:07 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Wed, 31 Jan 2001 03:13:57 -0500 Received: from mail.linux.com ([198.186.203.59]:13319 "EHLO mail.i.linux.com") by vger.kernel.org with ESMTP id ; Wed, 31 Jan 2001 03:13:47 -0500 Date: Wed, 31 Jan 2001 00:13:46 -0800 From: Andrew Prins To: linux-kernel@vger.kernel.org Subject: possible bug with adaptec aic-7896 and 2.4.x Message-ID: <20010131001346.A29375@linux.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i X-Operating-System: Linux shiftq.linux.com 2.2.16 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org in 2.4.0 and 2.4.1 on a pentium 3 with an onboard adaptec AIC-7896, i receive the following after it is detected: scsi: aborting command due to timeout: pid 0, scsi0, channel 0, id 0 lun 0 Inquiry 00 00 00 ff 00 i get the error twice, then the box hangs. this occurs on both a single processor box and a dual processor box with a kernel without SMP support. on a dual processor box when SMP is compiled in, i receive a similar error: scsi: aborting command due to timeout: pid 0, scsi0, channel 0, id 1 lun 1 Inquiry 20 00 00 ff 00 but the box continues to boot fine. the same hardware configuration in 2.2.15 works fine, and a similar hardware configuration using a AIC-7895 instead of a AIC-7896 running 2.4.x works fine. any ideas? thanks, a -- andrew prins (linux & diet coke advocate) finger next@keys.boca.verio.net for pgp key. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/