From: R.E.Wolff@BitWizard.nl (Rogier Wolff)
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Ivo Timmermans <irt@cistron.nl>, linux-kernel@vger.kernel.org
Subject: Re: binfmt_script and ^M
Date: Tue, 27 Feb 2001 15:36:40 +0100 (MET) [thread overview]
Message-ID: <200102271436.PAA13534@cave.bitwizard.nl> (raw)
In-Reply-To: <E14XkaQ-0003Sa-00@the-village.bc.nu> from Alan Cox at "Feb 27, 2001 01:54:40 pm"
Alan Cox wrote:
> > > > (\r\n), Linux 2.4.2 can't find an interpreter because it doesn't
> > > > recognize the \r. The following patch should fix this (untested).
> > >
> > > Fix the script. The kernel expects a specific format
> >
> > For what reason? Is it a standard to not allow it, or does it break
> > other things?
>
> The line terminator is \n so if you have
>
> #!/usr/bin/perl\r\n
>
> Then the command to run is "/usr/bin/perl\r" - and \r is a valid file name
> component
Agreed. If you insist "fix" it with.....
cd /usr/bin
ln -s perl perl\r
Roger.
--
** R.E.Wolff@BitWizard.nl ** http://www.BitWizard.nl/ ** +31-15-2137555 **
*-- BitWizard writes Linux device drivers for any device you may have! --*
* There are old pilots, and there are bold pilots.
* There are also old, bald pilots.
next prev parent reply other threads:[~2001-02-27 14:37 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-02-27 13:03 binfmt_script and ^M Ivo Timmermans
2001-02-27 13:44 ` Alan Cox
2001-02-27 13:47 ` Ivo Timmermans
2001-02-27 13:54 ` Alan Cox
2001-02-27 14:36 ` Rogier Wolff [this message]
2001-02-28 20:10 ` Erik Hensema
2001-03-01 12:04 ` Pavel Machek
2001-03-05 13:20 ` Jan Nieuwenhuizen
2001-03-05 13:37 ` Andreas Schwab
2001-03-05 13:40 ` Richard B. Johnson
2001-03-05 14:55 ` John Kodis
2001-03-05 15:25 ` Rik van Riel
2001-03-05 15:59 ` Jeff Mcadams
2001-03-05 16:18 ` Paul Flinders
2001-03-05 17:12 ` Andreas Schwab
2001-03-05 19:54 ` Paul Flinders
2001-03-05 20:09 ` Paul Flinders
2001-03-06 10:41 ` Andreas Schwab
2001-03-06 12:33 ` Paul Flinders
2001-03-06 14:45 ` Laramie Leavitt
2001-03-06 15:12 ` Sean Hunter
2001-03-06 15:37 ` David Weinehall
2001-03-06 21:10 ` Thorsten Glaser Geuer
[not found] ` <20010308130145.O20737@dev.sportingbet.com>
2001-03-09 16:52 ` Thorsten Glaser Geuer
2001-03-06 15:53 ` James A. Sutherland
2001-03-06 16:59 ` Xavier Bestel
2001-03-07 8:29 ` Ondrej Sury
2001-03-06 18:17 ` binfmt_script and ^M (historical note) Don Dugger
2001-03-05 18:58 ` binfmt_script and ^M Pozsar Balazs
2001-03-05 20:39 ` Robert Read
2001-03-05 21:05 ` Pozsar Balazs
2001-03-05 22:34 ` Robert Read
2001-03-06 15:14 ` Jeff Coy
2001-03-06 18:15 ` Peter Samuelson
2001-03-06 18:36 ` Jeff Coy
2001-03-06 20:26 ` John Kodis
2001-03-06 20:43 ` Andreas Schwab
2001-03-06 2:18 ` Richard B. Johnson
2001-03-05 15:50 ` Richard B. Johnson
2001-03-05 16:53 ` H. Peter Anvin
2001-03-05 21:48 ` Dr. Kelsey Hudson
2001-03-06 18:19 ` Peter Samuelson
2001-03-06 21:04 ` Dr. Kelsey Hudson
2001-03-05 14:56 ` [PATCH]: print missing interpreter name [Was: Re: binfmt_script and ^M] Jan Nieuwenhuizen
2001-03-05 15:59 ` Richard B. Johnson
2001-03-05 20:18 ` [PATCH #3]: " Jan Nieuwenhuizen
2001-03-05 16:37 ` binfmt_script and ^M Erik Hensema
2001-03-05 22:13 ` Pavel Machek
-- strict thread matches above, loose matches on Subject: below --
2001-02-27 13:42 Heusden, Folkert van
2001-02-27 13:38 ` Ivo Timmermans
2001-02-27 14:01 ` Bruce Harada
2001-02-27 19:20 ` Jamie Lokier
2001-02-27 19:59 ` Don Dugger
2001-02-27 21:35 ` Rogier Wolff
2001-02-27 13:53 Heusden, Folkert van
2001-02-27 14:26 ` Alistair Riddell
2001-02-27 23:22 ` David
2001-02-28 14:07 ` Jamie Lokier
2001-02-28 22:23 ` H. Peter Anvin
2001-03-05 19:14 Jesse Pollard
2001-03-06 20:54 ` Thorsten Glaser Geuer
2001-03-05 21:15 Andries.Brouwer
2001-03-06 13:55 Jesse Pollard
2001-03-06 14:54 ` Andreas Schwab
2001-03-06 15:56 Jesse Pollard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200102271436.PAA13534@cave.bitwizard.nl \
--to=r.e.wolff@bitwizard.nl \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=irt@cistron.nl \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox