Re: Linux 2.4.2ac12 (vt82c686 info)

[Rogerio Brito <rbrito@iname.com>]

On Mar 07 2001, Vojtech Pavlik wrote:
> Also, the vt82c686 will work just fine with Linux, but will be limited
> to UDMA33, because UDMA66 on this chip does reliably fail.

	How do I know which one I have? Using the revision of the
	chip?

	lspci only shows that I have a vt82c686 (revision 22 --
	perhaps this is the clue), but I have been using UDMA66 drives
	here with *no* corruption so far (or I haven't stressed my
	system enough to notice it).

	Here are the lines from my lspci which I think are relevant
	here:

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22)
00:04.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 10)
00:04.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 10)
00:04.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 10)
00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
                                                                      
	Any hints are more than welcome.

	[]s, Roger...

P.S.: This is an ASUS A7V mobo.
-- 
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  Rogerio Brito - rbrito@iname.com - http://www.ime.usp.br/~rbrito/
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=