2.4 and PPPoE problem

[Martin Hicks <mort@bork.org>]

[-- Attachment #1: Type: text/plain, Size: 1840 bytes --]

Hello,

I'm using PPPoE with an i586 machine running 2.4.2.

The machine connects fine and allows network traffic to pass
through the link.

However, certain websites seem to choke.
(notable ones are www.chapters.ca and www.hp.com)

Using Lynx or Netscape I get the same results, a few bytes of
traffic are received and then nothing (eventually the connection
times out).  

The same does not happen in windows.  (ugh)

I have not encountered any machine that I have telnet/ftp/ssh
access to that breaks in this way so I can only confirm that http traffic 
is not working.

This gateway machine does masquerading, and internal machines and the external
machine react the same way.

TIA
mh


Here is some useful info:

mort@galileo:~$ uname -a
Linux galileo 2.4.2 #4 Thu Feb 22 14:13:23 EST 2001 i586 unknown

mort@galileo:~$ /sbin/ifconfig ppp0
ppp0      Link encap:Point-to-Point Protocol  
          inet addr:209.217.122.37  P-t-P:209.217.122.1  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1480  Metric:1
          RX packets:1272056 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1476697 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:3 
          RX bytes:430171737 (410.2 Mb)  TX bytes:1260803415 (1202.3 Mb)


mort@galileo:~$ /sbin/route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
magma           *               255.255.255.255 UH    0      0        0 ppp0
192.168.69.0    *               255.255.255.0   U     0      0        0 eth0
default         magma           0.0.0.0         UG    0      0        0 ppp0




-- 
Martin Hicks   || mort@bork.org    
Use PGP/GnuPG  || DSS PGP Key: 0x4C7F2BEE  
Beer: So much more than just a breakfast drink.

[-- Attachment #2: Type: application/pgp-signature, Size: 232 bytes --]